2
* U-boot - Configuration file for BF533 STAMP board
5
#ifndef __CONFIG_BF533_STAMP_H__
6
#define __CONFIG_BF533_STAMP_H__
8
#include <asm/config-pre.h>
14
#define CONFIG_BFIN_CPU bf533-0.3
15
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
20
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
23
/* CONFIG_CLKIN_HZ is any value in Hz */
24
#define CONFIG_CLKIN_HZ 11059200
25
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
27
#define CONFIG_CLKIN_HALF 0
28
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
30
#define CONFIG_PLL_BYPASS 0
31
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32
/* Values can range from 0-63 (where 0 means 64) */
33
#define CONFIG_VCO_MULT 45
34
/* CCLK_DIV controls the core clock divider */
35
/* Values can be 1, 2, 4, or 8 ONLY */
36
#define CONFIG_CCLK_DIV 1
37
/* SCLK_DIV controls the system clock divider */
38
/* Values can range from 1-15 */
39
#define CONFIG_SCLK_DIV 6 /* note: 1.2 boards can go faster */
45
#define CONFIG_MEM_ADD_WDTH 11
46
#define CONFIG_MEM_SIZE 128
48
#define CONFIG_EBIU_SDRRC_VAL 0x268
49
#define CONFIG_EBIU_SDGCTL_VAL 0x911109
51
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
52
#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3
53
#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983
55
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
56
#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
62
#define ADI_CMDS_NETWORK 1
63
#define CONFIG_NET_MULTI
64
#define CONFIG_SMC91111 1
65
#define CONFIG_SMC91111_BASE 0x20300300
66
#define SMC91111_EEPROM_INIT() \
68
bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0); \
69
bfin_write_FIO_FLAG_C(PF1); \
70
bfin_write_FIO_FLAG_S(PF0); \
73
#define CONFIG_HOSTNAME bf533-stamp
74
/* Uncomment next line to use fixed MAC address */
75
/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */
81
#define CONFIG_FLASH_CFI_DRIVER
82
#define CONFIG_SYS_FLASH_BASE 0x20000000
83
#define CONFIG_SYS_FLASH_CFI
84
#define CONFIG_SYS_FLASH_CFI_AMD_RESET
85
#define CONFIG_SYS_MAX_FLASH_BANKS 1
86
#define CONFIG_SYS_MAX_FLASH_SECT 67
92
#define CONFIG_BFIN_SPI
93
#define CONFIG_ENV_SPI_MAX_HZ 30000000
94
#define CONFIG_SF_DEFAULT_SPEED 30000000
95
#define CONFIG_SPI_FLASH
96
#define CONFIG_SPI_FLASH_ATMEL
97
#define CONFIG_SPI_FLASH_SPANSION
98
#define CONFIG_SPI_FLASH_STMICRO
99
#define CONFIG_SPI_FLASH_WINBOND
103
* Env Storage Settings
105
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
106
#define CONFIG_ENV_IS_IN_SPI_FLASH
107
#define CONFIG_ENV_OFFSET 0x10000
108
#define CONFIG_ENV_SIZE 0x2000
109
#define CONFIG_ENV_SECT_SIZE 0x10000
111
#define CONFIG_ENV_IS_IN_FLASH
112
#define CONFIG_ENV_OFFSET 0x4000
113
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
114
#define CONFIG_ENV_SIZE 0x2000
115
#define CONFIG_ENV_SECT_SIZE 0x2000
117
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
118
#define ENV_IS_EMBEDDED
120
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
122
#ifdef ENV_IS_EMBEDDED
123
/* WARNING - the following is hand-optimized to fit within
124
* the sector before the environment sector. If it throws
125
* an error during compilation remove an object here to get
126
* it linked after the configuration sector.
128
# define LDS_BOARD_TEXT \
129
cpu/blackfin/traps.o (.text .text.*); \
130
cpu/blackfin/interrupt.o (.text .text.*); \
131
cpu/blackfin/serial.o (.text .text.*); \
132
common/dlmalloc.o (.text .text.*); \
133
lib_generic/crc32.o (.text .text.*); \
134
. = DEFINED(env_offset) ? env_offset : .; \
135
common/env_embedded.o (.text .text.*);
141
* By default PF2 is used as SDA and PF3 as SCL on the Stamp board
143
#define CONFIG_SOFT_I2C
144
#ifdef CONFIG_SOFT_I2C
149
*pFIO_DIR |= PF_SCL; \
154
*pFIO_DIR |= PF_SDA; \
155
*pFIO_INEN &= ~PF_SDA; \
158
#define I2C_TRISTATE \
160
*pFIO_DIR &= ~PF_SDA; \
161
*pFIO_INEN |= PF_SDA; \
164
#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0)
165
#define I2C_SDA(bit) \
168
*pFIO_FLAG_S = PF_SDA; \
170
*pFIO_FLAG_C = PF_SDA; \
173
#define I2C_SCL(bit) \
176
*pFIO_FLAG_S = PF_SCL; \
178
*pFIO_FLAG_C = PF_SCL; \
181
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
183
#define CONFIG_SYS_I2C_SPEED 50000
184
#define CONFIG_SYS_I2C_SLAVE 0
189
* Compact Flash / IDE / ATA Settings
192
/* Enabled below option for CF support */
193
/* #define CONFIG_STAMP_CF */
194
#if defined(CONFIG_STAMP_CF)
195
#define CONFIG_MISC_INIT_R
196
#define CONFIG_DOS_PARTITION 1
197
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
198
#undef CONFIG_IDE_LED /* no led for ide supported */
199
#undef CONFIG_IDE_RESET /* no reset for ide supported */
201
#define CONFIG_SYS_IDE_MAXBUS 1
202
#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1)
204
#define CONFIG_SYS_ATA_BASE_ADDR 0x20200000
205
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
207
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */
208
#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */
209
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0007 /* alternate registers */
211
#define CONFIG_SYS_ATA_STRIDE 2
213
#undef CONFIG_EBIU_AMBCTL1_VAL
214
#define CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2
221
#define CONFIG_RTC_BFIN
222
#define CONFIG_UART_CONSOLE 0
224
/* FLASH/ETHERNET uses the same async bank */
225
#define SHARED_RESOURCES 1
227
/* define to enable boot progress via leds */
228
/* #define CONFIG_SHOW_BOOT_PROGRESS */
230
/* define to enable run status via led */
231
/* #define CONFIG_STATUS_LED */
232
#ifdef CONFIG_STATUS_LED
233
#define CONFIG_BOARD_SPECIFIC_LED
235
typedef unsigned int led_id_t;
236
void __led_init(led_id_t mask, int state);
237
void __led_set(led_id_t mask, int state);
238
void __led_toggle(led_id_t mask);
240
/* use LED1 to indicate booting/alive */
241
#define STATUS_LED_BOOT 0
242
#define STATUS_LED_BIT 1
243
#define STATUS_LED_STATE STATUS_LED_ON
244
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
245
/* use LED2 to indicate crash */
246
#define STATUS_LED_CRASH 1
247
#define STATUS_LED_BIT1 2
248
#define STATUS_LED_STATE1 STATUS_LED_ON
249
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
252
/* define to enable splash screen support */
253
/* #define CONFIG_VIDEO */
257
* Pull in common ADI header for remaining command/environment setup
259
#include <configs/bfin_adi_common.h>