3
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
5
* See file CREDITS for list of people who contributed to this
8
* This program is free software; you can redistribute it and/or
9
* modify it under the terms of the GNU General Public License as
10
* published by the Free Software Foundation; either version 2 of
11
* the License, or (at your option) any later version.
13
* This program is distributed in the hope that it will be useful,
14
* but WITHOUT ANY WARRANTY; without even the implied warranty of
15
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16
* GNU General Public License for more details.
18
* You should have received a copy of the GNU General Public License
19
* along with this program; if not, write to the Free Software
20
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25
* board/config.h - configuration options, board specific
32
* High Level Configuration Options
36
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
37
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
38
#define CONFIG_OCRTC 1 /* ...on a OCRTC board */
40
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
42
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
44
#define CONFIG_BAUDRATE 9600
45
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
47
#undef CONFIG_BOOTARGS
48
#define CONFIG_BOOTCOMMAND "go fff00100"
50
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
51
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
53
#define CONFIG_PPC4xx_EMAC
54
#define CONFIG_MII 1 /* MII PHY management */
55
#define CONFIG_PHY_ADDR 0 /* PHY address */
56
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
57
#define CONFIG_NET_MULTI
63
#define CONFIG_BOOTP_BOOTFILESIZE
64
#define CONFIG_BOOTP_BOOTPATH
65
#define CONFIG_BOOTP_GATEWAY
66
#define CONFIG_BOOTP_HOSTNAME
70
* Command line configuration.
72
#include <config_cmd_default.h>
74
#define CONFIG_CMD_PCI
75
#define CONFIG_CMD_IRQ
76
#define CONFIG_CMD_ASKENV
77
#define CONFIG_CMD_ELF
78
#define CONFIG_CMD_BSP
79
#define CONFIG_CMD_EEPROM
82
#define CONFIG_MAC_PARTITION
83
#define CONFIG_DOS_PARTITION
85
#undef CONFIG_WATCHDOG /* watchdog disabled */
87
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
90
* Miscellaneous configurable options
92
#define CONFIG_SYS_LONGHELP /* undef to save memory */
93
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
94
#if defined(CONFIG_CMD_KGDB)
95
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
97
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
99
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
100
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
101
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
103
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
105
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
106
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
108
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
109
#define CONFIG_SYS_BASE_BAUD 691200
111
/* The following table includes the supported baudrates */
112
#define CONFIG_SYS_BAUDRATE_TABLE \
113
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
114
57600, 115200, 230400, 460800, 921600 }
116
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
117
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
119
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
121
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
123
/*-----------------------------------------------------------------------
125
*-----------------------------------------------------------------------
127
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
128
#define PCI_HOST_FORCE 1 /* configure as pci host */
129
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
131
#define CONFIG_PCI /* include pci support */
132
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
133
#define CONFIG_PCI_PNP /* do pci plug-and-play */
134
/* resource configuration */
136
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
138
#define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/
140
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
141
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0410 /* PCI Device ID: OCRTC */
142
#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
143
#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
144
#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
145
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
146
#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
147
#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
148
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
150
/*-----------------------------------------------------------------------
151
* Start addresses for the final memory configuration
152
* (Set up by the startup code)
153
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
155
#define CONFIG_SYS_SDRAM_BASE 0x00000000
156
#define CONFIG_SYS_FLASH_BASE 0xFFFD0000
157
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
158
#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
159
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
162
* For booting Linux, the board info and command line data
163
* have to be in the first 8 MB of memory, since this is
164
* the maximum mapped by the Linux kernel during initialization.
166
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
167
/*-----------------------------------------------------------------------
170
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
171
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
173
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
174
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
176
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
177
#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
178
#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
180
* The following defines are added for buggy IOP480 byte interface.
181
* All other boards should use the standard values (CPCI405 etc.)
183
#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
184
#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
185
#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
187
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
189
#if 0 /* Use NVRAM for environment variables */
190
/*-----------------------------------------------------------------------
193
#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
194
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
195
#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */
196
#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */
197
#define CONFIG_ENV_ADDR \
198
(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
199
#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
201
#else /* Use EEPROM for environment variables */
203
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
204
#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
205
#define CONFIG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */
206
/* total size of a CAT24WC08 is 1024 bytes */
209
/*-----------------------------------------------------------------------
210
* I2C EEPROM (CAT24WC08) for environment
212
#define CONFIG_HARD_I2C /* I2c with hardware support */
213
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
214
#define CONFIG_SYS_I2C_SLAVE 0x7F
216
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
217
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
218
/* mask of address bits that overflow into the "EEPROM chip address" */
219
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
220
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
221
/* 16 byte page write mode using*/
222
/* last 4 bits of the address */
223
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
226
* Init Memory Controller:
228
* BR0/1 and OR0/1 (FLASH)
231
#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
232
#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
234
/*-----------------------------------------------------------------------
235
* External Bus Controller (EBC) Setup
238
/* Memory Bank 0 (Flash Bank 0) initialization */
239
#define CONFIG_SYS_EBC_PB0AP 0x92015480
240
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
242
/* Memory Bank 1 (Flash Bank 1) initialization */
243
#define CONFIG_SYS_EBC_PB1AP 0x92015480
244
#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
246
/* Memory Bank 2 (PLD - FPGA-boot) initialization */
247
#define CONFIG_SYS_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
248
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
249
#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
251
/* Memory Bank 3 (PLD - OSL) initialization */
252
#define CONFIG_SYS_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
253
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
254
#define CONFIG_SYS_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
256
/* Memory Bank 4 (Spartan2 1) initialization */
257
#define CONFIG_SYS_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
258
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
259
#define CONFIG_SYS_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
261
/* Memory Bank 5 (Spartan2 2) initialization */
262
#define CONFIG_SYS_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
263
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
264
#define CONFIG_SYS_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
266
/* Memory Bank 6 (Virtex 1) initialization */
267
#define CONFIG_SYS_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
268
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
269
#define CONFIG_SYS_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
271
/* Memory Bank 7 (Virtex 2) initialization */
272
#define CONFIG_SYS_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
273
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
274
#define CONFIG_SYS_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
277
#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
279
/*-----------------------------------------------------------------------
280
* Definitions for initial stack pointer and data area (in DPRAM)
283
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
284
#define CONFIG_SYS_TEMP_STACK_OCM 1
286
/* On Chip Memory location */
287
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
288
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
290
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
291
#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
292
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
293
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
294
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
298
* Internal Definitions
302
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
303
#define BOOTFLAG_WARM 0x02 /* Software reboot */
305
#endif /* __CONFIG_H */