3
* Marvell Semiconductor <www.marvell.com>
4
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
6
* See file CREDITS for list of people who contributed to this
9
* This program is free software; you can redistribute it and/or
10
* modify it under the terms of the GNU General Public License as
11
* published by the Free Software Foundation; either version 2 of
12
* the License, or (at your option) any later version.
14
* This program is distributed in the hope that it will be useful,
15
* but WITHOUT ANY WARRANTY; without even the implied warranty of
16
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17
* GNU General Public License for more details.
19
* You should have received a copy of the GNU General Public License
20
* along with this program; if not, write to the Free Software
21
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
25
#ifndef _CONFIG_MV88F6281GTW_GE_H
26
#define _CONFIG_MV88F6281GTW_GE_H
29
* Version number information
31
#define CONFIG_IDENT_STRING "\nMarvell-MV88F6281GTW_GE"
34
* High Level Configuration Options (easy to change)
36
#define CONFIG_MARVELL 1
37
#define CONFIG_ARM926EJS 1 /* Basic Architecture */
38
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
39
#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
40
#define CONFIG_KW88F6281 1 /* SOC Name */
41
#define CONFIG_MACH_MV88F6281GTW_GE /* Machine type */
43
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
44
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
45
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
46
#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */
47
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
52
#define CONFIG_SYS_HZ 1000
55
* NS16550 Configuration
57
#define CONFIG_SYS_NS16550
58
#define CONFIG_SYS_NS16550_SERIAL
59
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
60
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
61
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
64
* Serial Port configuration
65
* The following definitions let you select what serial you want to use
66
* for your console driver.
69
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
70
#define CONFIG_BAUDRATE 115200
71
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
72
115200,230400, 460800, 921600 }
74
#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
77
* For booting Linux, the board info and command line data
78
* have to be in the first 8 MB of memory, since this is
79
* the maximum mapped by the Linux kernel during initialization.
81
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
82
#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
83
#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
85
#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */
86
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
87
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
88
+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
90
* Commands configuration
92
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
93
#include <config_cmd_default.h>
94
#define CONFIG_CMD_AUTOSCRIPT
95
#define CONFIG_CMD_DHCP
96
#define CONFIG_CMD_ENV
97
#define CONFIG_CMD_FAT
98
#define CONFIG_CMD_PING
100
#define CONFIG_CMD_USB
103
* Flash configuration
106
#define CONFIG_SPI_FLASH 1
107
#define CONFIG_HARD_SPI 1
108
#define CONFIG_KIRKWOOD_SPI 1
109
#define CONFIG_SPI_FLASH_MACRONIX 1
110
#define CONFIG_ENV_SPI_BUS 0
111
#define CONFIG_ENV_SPI_CS 0
112
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /*50Mhz */
116
* Environment variables configurations
118
#ifdef CONFIG_SPI_FLASH
119
#define CONFIG_ENV_IS_IN_SPI_FLASH 1
120
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
122
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
124
#define CONFIG_ENV_SIZE 0x1000 /* 4k */
125
#define CONFIG_ENV_ADDR 0x30000
126
#define CONFIG_ENV_OFFSET 0x30000 /* env starts here */
129
* Default environment variables
131
#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
132
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
133
"${x_bootcmd_usb}; bootm 0x6400000;"
135
#define CONFIG_MTDPARTS "spi0.0:512k(uboot)," \
136
"512k@512k(psm),2m@1m(kernel),13m@3m(rootfs)\0"
138
#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
139
"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
140
"x_bootcmd_kernel=cp.b 0xE8100000 0x6400000 0x200000\0" \
141
"x_bootcmd_usb=usb start\0" \
142
"x_bootargs_root=root=/dev/mtdblock3 ro rootfstype=squashfs\0"
145
* Size of malloc() pool
147
#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */
148
/* size in bytes reserved for initial data */
149
#define CONFIG_SYS_GBL_DATA_SIZE 128
152
* Other required minimal configurations
154
#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
155
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
156
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
157
#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
158
#define CONFIG_NR_DRAM_BANKS 4
159
#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
160
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
161
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
162
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
163
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
164
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
167
* Ethernet Driver configuration
169
#ifdef CONFIG_CMD_NET
170
#define CONFIG_CMD_DHCP
171
#define CONFIG_CMD_PING
172
#define CONFIG_NETCONSOLE /* include NetConsole support */
173
#define CONFIG_NET_MULTI /* specify more that one ports available */
174
#define CONFIG_MII /* expose smi ove miiphy interface */
175
#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
176
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
177
#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */
178
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
179
#endif /* CONFIG_CMD_NET */
182
* Marvell 88Exxxx Switch configurations
184
#define CONFIG_RESET_PHY_R /* use reset_phy() to init phy/swtich */
185
#define CONFIG_MV88E61XX_SWITCH /* Enable mv88e61xx switch driver */
190
#ifdef CONFIG_CMD_USB
191
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
192
#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
193
#define CONFIG_EHCI_IS_TDI
194
#define CONFIG_USB_STORAGE
195
#define CONFIG_DOS_PARTITION
196
#define CONFIG_ISO_PARTITION
197
#define CONFIG_SUPPORT_VFAT
198
#endif /* CONFIG_CMD_USB */
200
#endif /* _CONFIG_MV88F6281GTW_GE_H */