4
* Kshitij Gupta <kshitij@ti.com>
5
* Configuation settings for the TI OMAP Innovator board.
9
* Philippe Robin, <philippe.robin@arm.com>
10
* Configuration for Compact Integrator board.
12
* See file CREDITS for list of people who contributed to this
15
* This program is free software; you can redistribute it and/or
16
* modify it under the terms of the GNU General Public License as
17
* published by the Free Software Foundation; either version 2 of
18
* the License, or (at your option) any later version.
20
* This program is distributed in the hope that it will be useful,
21
* but WITHOUT ANY WARRANTY; without even the implied warranty of
22
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23
* GNU General Public License for more details.
25
* You should have received a copy of the GNU General Public License
26
* along with this program; if not, write to the Free Software
27
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
35
* High Level Configuration Options
38
#define CONFIG_SYS_MEMTEST_START 0x100000
39
#define CONFIG_SYS_MEMTEST_END 0x10000000
40
#define CONFIG_SYS_HZ 1000
41
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
42
#define CONFIG_SYS_TIMERBASE 0x13000100
44
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
45
#define CONFIG_SETUP_MEMORY_TAGS 1
46
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
48
* Size of malloc() pool
50
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
51
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
56
#define CONFIG_NET_MULTI
57
#define CONFIG_SMC91111
58
#define CONFIG_SMC_USE_32_BIT
59
#define CONFIG_SMC91111_BASE 0xC8000000
60
#undef CONFIG_SMC91111_EXT_PHY
63
* NS16550 Configuration
65
#define CONFIG_PL011_SERIAL
66
#define CONFIG_PL011_CLOCK 14745600
67
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
68
#define CONFIG_CONS_INDEX 0
69
#define CONFIG_BAUDRATE 38400
70
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
71
#define CONFIG_SYS_SERIAL0 0x16000000
72
#define CONFIG_SYS_SERIAL1 0x17000000
78
#define CONFIG_BOOTP_BOOTFILESIZE
79
#define CONFIG_BOOTP_BOOTPATH
80
#define CONFIG_BOOTP_GATEWAY
81
#define CONFIG_BOOTP_HOSTNAME
85
* Command line configuration.
87
#define CONFIG_CMD_BDI
88
#define CONFIG_CMD_DHCP
89
#define CONFIG_CMD_SAVEENV
90
#define CONFIG_CMD_FLASH
91
#define CONFIG_CMD_IMI
92
#define CONFIG_CMD_MEMORY
93
#define CONFIG_CMD_NET
94
#define CONFIG_CMD_PING
98
#define CONFIG_BOOTDELAY 2
99
#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
100
#define CONFIG_BOOTCOMMAND "bootp ; bootm"
102
/* The kernel command line & boot command below are for a platform flashed with afu.axf
104
Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot
105
Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
106
Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
107
SIB at Block62 End Block62 address 0x24f80000
110
#define CONFIG_BOOTDELAY 2
111
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
112
#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
115
* Miscellaneous configurable options
117
#define CONFIG_SYS_LONGHELP /* undef to save memory */
118
#define CONFIG_SYS_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
119
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
120
/* Print Buffer Size */
121
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
122
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
123
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
125
#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
127
/*-----------------------------------------------------------------------
130
* The stack sizes are set up in start.S using the settings below
132
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
133
#ifdef CONFIG_USE_IRQ
134
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
135
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
138
/*-----------------------------------------------------------------------
139
* Physical Memory Map
141
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
142
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
143
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
145
/*-----------------------------------------------------------------------
146
* FLASH and environment organization
148
* Top varies according to amount fitted
149
* Reserve top 4 blocks of flash
153
* - U-Boot environment
155
* Base is always 0x24000000
158
#define CONFIG_SYS_FLASH_BASE 0x24000000
159
#define CONFIG_SYS_FLASH_CFI 1
160
#define CONFIG_FLASH_CFI_DRIVER 1
161
#define CONFIG_SYS_MAX_FLASH_SECT 64
162
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
163
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
164
#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
165
#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
167
#define CONFIG_SYS_MONITOR_LEN 0x00100000
168
#define CONFIG_ENV_IS_IN_FLASH 1
171
* Move up the U-Boot & monitor area if more flash is fitted.
172
* If this U-Boot is to be run on Integrators with varying flash sizes,
173
* drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
174
* register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
175
* - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
176
* embedded in the boot monitor(s) area
178
#if ( PHYS_FLASH_SIZE == 0x04000000 )
180
#define CONFIG_ENV_ADDR 0x27F00000
181
#define CONFIG_SYS_MONITOR_BASE 0x27F40000
183
#elif (PHYS_FLASH_SIZE == 0x02000000 )
185
#define CONFIG_ENV_ADDR 0x25F00000
186
#define CONFIG_SYS_MONITOR_BASE 0x25F40000
190
#define CONFIG_ENV_ADDR 0x24F00000
191
#define CONFIG_SYS_MONITOR_BASE 0x27F40000
195
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
196
#define CONFIG_ENV_SIZE 8192 /* 8KB */
197
/*-----------------------------------------------------------------------
198
* CP control registers
200
#define CPCR_BASE 0xCB000000 /* CP Registers*/
201
#define OS_FLASHPROG 0x00000004 /* Flash register*/
202
#define CPMASK_EXTRABANK 0x8
203
#define CPMASK_FLASHSIZE 0x4
204
#define CPMASK_FLWREN 0x2
205
#define CPMASK_FLVPPEN 0x1
208
* The ARM boot monitor initializes the board.
209
* However, the default U-Boot code also performs the initialization.
210
* If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
211
* - see documentation supplied with board for details of how to choose the
212
* image to run at reset/power up
213
* e.g. whether the ARM Boot Monitor runs before U-Boot
215
#define CONFIG_SKIP_LOWLEVEL_INIT
220
* The ARM boot monitor does not relocate U-Boot.
221
* However, the default U-Boot code performs the relocation check,
222
* and may relocate the code if the memory map is changed.
223
* If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
225
#define SKIP_CONFIG_RELOCATE_UBOOT
228
/*-----------------------------------------------------------------------
229
* There are various dependencies on the core module (CM) fitted
230
* Users should refer to their CM user guide
231
* - when porting adjust u-boot/Makefile accordingly
232
* to define the necessary CONFIG_ s for the CM involved
233
* see e.g. cp_926ejs_config
236
#include "armcoremodule.h"
239
* If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
240
* the core module has a CM_INIT register
241
* then the U-Boot initialisation code will
242
* e.g. ARM Boot Monitor or pre-loader is repeated once
243
* (to re-initialise any existing CM_INIT settings to safe values).
245
* This is usually not the desired behaviour since the platform
246
* will either reboot into the ARM monitor (or pre-loader)
247
* or continuously cycle thru it without U-Boot running,
248
* depending upon the setting of Integrator/CP switch S2-4.
250
* However it may be needed if Integrator/CP switch S2-1
251
* is set OFF to boot direct into U-Boot.
252
* In that case comment out the line below.
253
#undef CONFIG_CM_INIT
256
#endif /* __CONFIG_H */