2
* LILLY-1131 module support
4
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
6
* based on code for other MX31 boards,
8
* Copyright 2005-2007 Freescale Semiconductor
9
* Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
10
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
12
* This program is free software; you can redistribute it and/or modify
13
* it under the terms of the GNU General Public License as published by
14
* the Free Software Foundation; either version 2 of the License, or
15
* (at your option) any later version.
17
* This program is distributed in the hope that it will be useful,
18
* but WITHOUT ANY WARRANTY; without even the implied warranty of
19
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20
* GNU General Public License for more details.
23
#include <linux/types.h>
24
#include <linux/init.h>
25
#include <linux/clk.h>
26
#include <linux/gpio.h>
27
#include <linux/delay.h>
28
#include <linux/platform_device.h>
29
#include <linux/interrupt.h>
30
#include <linux/smsc911x.h>
31
#include <linux/mtd/physmap.h>
32
#include <linux/spi/spi.h>
33
#include <linux/mfd/mc13783.h>
34
#include <linux/usb/otg.h>
35
#include <linux/usb/ulpi.h>
37
#include <asm/mach-types.h>
38
#include <asm/mach/arch.h>
39
#include <asm/mach/time.h>
40
#include <asm/mach/map.h>
42
#include <mach/hardware.h>
43
#include <mach/common.h>
44
#include <mach/iomux-mx3.h>
45
#include <mach/board-mx31lilly.h>
46
#include <mach/ulpi.h>
48
#include "devices-imx31.h"
51
* This file contains module-specific initialization routines for LILLY-1131.
52
* Initialization of peripherals found on the baseboard is implemented in the
53
* appropriate baseboard support code.
56
/* SMSC ethernet support */
58
static struct resource smsc91x_resources[] = {
60
.start = MX31_CS4_BASE_ADDR,
61
.end = MX31_CS4_BASE_ADDR + 0xffff,
62
.flags = IORESOURCE_MEM,
65
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
66
.end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
67
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
71
static struct smsc911x_platform_config smsc911x_config = {
72
.phy_interface = PHY_INTERFACE_MODE_MII,
73
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
74
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
75
.flags = SMSC911X_USE_32BIT |
76
SMSC911X_SAVE_MAC_ADDRESS |
77
SMSC911X_FORCE_INTERNAL_PHY,
80
static struct platform_device smsc91x_device = {
83
.num_resources = ARRAY_SIZE(smsc91x_resources),
84
.resource = smsc91x_resources,
86
.platform_data = &smsc911x_config,
91
static struct physmap_flash_data nor_flash_data = {
95
static struct resource nor_flash_resource = {
98
.flags = IORESOURCE_MEM,
101
static struct platform_device physmap_flash_device = {
102
.name = "physmap-flash",
105
.platform_data = &nor_flash_data,
107
.resource = &nor_flash_resource,
113
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
114
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
116
static int usbh1_init(struct platform_device *pdev)
119
MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
120
MX31_PIN_CSPI1_MISO__USBH1_RXDP,
121
MX31_PIN_CSPI1_SS0__USBH1_TXDM,
122
MX31_PIN_CSPI1_SS1__USBH1_TXDP,
123
MX31_PIN_CSPI1_SS2__USBH1_RCV,
124
MX31_PIN_CSPI1_SCLK__USBH1_OEB,
125
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
128
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
130
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
131
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
132
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
133
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
134
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
135
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
136
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
138
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
142
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
143
MXC_EHCI_INTERFACE_SINGLE_UNI);
146
static int usbh2_init(struct platform_device *pdev)
149
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
150
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
151
MX31_PIN_USBH2_CLK__USBH2_CLK,
152
MX31_PIN_USBH2_DIR__USBH2_DIR,
153
MX31_PIN_USBH2_NXT__USBH2_NXT,
154
MX31_PIN_USBH2_STP__USBH2_STP,
157
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
159
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
160
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
161
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
162
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
163
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
164
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
165
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
166
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
167
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
168
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
169
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
170
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
172
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
175
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
177
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
178
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
182
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
185
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
187
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
190
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
192
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
195
static void lilly1131_usb_init(void)
197
imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
199
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
200
ULPI_OTG_DRVVBUS_EXT);
202
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
207
static int spi_internal_chipselect[] = {
213
static const struct spi_imx_master spi0_pdata __initconst = {
214
.chipselect = spi_internal_chipselect,
215
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
218
static const struct spi_imx_master spi1_pdata __initconst = {
219
.chipselect = spi_internal_chipselect,
220
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
223
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
224
.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
227
static struct spi_board_info mc13783_dev __initdata = {
228
.modalias = "mc13783",
229
.max_speed_hz = 1000000,
232
.platform_data = &mc13783_pdata,
233
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
236
static struct platform_device *devices[] __initdata = {
238
&physmap_flash_device,
241
static int mx31lilly_baseboard;
242
core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
244
static void __init mx31lilly_board_init(void)
246
switch (mx31lilly_baseboard) {
247
case MX31LILLY_NOBOARD:
253
printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
254
mx31lilly_baseboard);
257
mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
260
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
261
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
262
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
263
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
264
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
265
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
266
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
268
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
269
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
270
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
271
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
272
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
273
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
274
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
276
imx31_add_spi_imx0(&spi0_pdata);
277
imx31_add_spi_imx1(&spi1_pdata);
278
spi_register_board_info(&mc13783_dev, 1);
280
platform_add_devices(devices, ARRAY_SIZE(devices));
283
lilly1131_usb_init();
286
static void __init mx31lilly_timer_init(void)
288
mx31_clocks_init(26000000);
291
static struct sys_timer mx31lilly_timer = {
292
.init = mx31lilly_timer_init,
295
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
296
.boot_params = MX3x_PHYS_OFFSET + 0x100,
297
.map_io = mx31_map_io,
298
.init_early = imx31_init_early,
299
.init_irq = mx31_init_irq,
300
.timer = &mx31lilly_timer,
301
.init_machine = mx31lilly_board_init,