1
/***************************************************************************/
4
* nettel.c -- startup code support for the NETtel boards
6
* Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
9
/***************************************************************************/
11
#include <linux/kernel.h>
12
#include <linux/param.h>
13
#include <linux/init.h>
15
#include <linux/platform_device.h>
16
#include <asm/coldfire.h>
17
#include <asm/mcfsim.h>
18
#include <asm/nettel.h>
20
/***************************************************************************/
23
* Define the IO and interrupt resources of the 2 SMC9196 interfaces.
25
#define NETTEL_SMC0_ADDR 0x30600300
26
#define NETTEL_SMC0_IRQ 29
28
#define NETTEL_SMC1_ADDR 0x30600000
29
#define NETTEL_SMC1_IRQ 27
32
* We need some access into the SMC9196 registers. Define those registers
33
* we will need here (including the smc91x.h doesn't seem to give us these
36
#define SMC91xx_BANKSELECT 14
37
#define SMC91xx_BASEADDR 2
38
#define SMC91xx_BASEMAC 4
40
/***************************************************************************/
42
static struct resource nettel_smc91x_0_resources[] = {
44
.start = NETTEL_SMC0_ADDR,
45
.end = NETTEL_SMC0_ADDR + 0x20,
46
.flags = IORESOURCE_MEM,
49
.start = NETTEL_SMC0_IRQ,
50
.end = NETTEL_SMC0_IRQ,
51
.flags = IORESOURCE_IRQ,
55
static struct resource nettel_smc91x_1_resources[] = {
57
.start = NETTEL_SMC1_ADDR,
58
.end = NETTEL_SMC1_ADDR + 0x20,
59
.flags = IORESOURCE_MEM,
62
.start = NETTEL_SMC1_IRQ,
63
.end = NETTEL_SMC1_IRQ,
64
.flags = IORESOURCE_IRQ,
68
static struct platform_device nettel_smc91x[] = {
72
.num_resources = ARRAY_SIZE(nettel_smc91x_0_resources),
73
.resource = nettel_smc91x_0_resources,
78
.num_resources = ARRAY_SIZE(nettel_smc91x_1_resources),
79
.resource = nettel_smc91x_1_resources,
83
static struct platform_device *nettel_devices[] __initdata = {
88
/***************************************************************************/
90
static u8 nettel_macdefault[] __initdata = {
91
0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
95
* Set flash contained MAC address into SMC9196 core. Make sure the flash
96
* MAC address is sane, and not an empty flash. If no good use the Moreton
97
* Bay default MAC address instead.
100
static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
104
macp = (u16 *) flashaddr;
105
if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
106
macp = (u16 *) &nettel_macdefault[0];
108
writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
109
writew(macp[0], ioaddr + SMC91xx_BASEMAC);
110
writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
111
writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
114
/***************************************************************************/
117
* Re-map the address space of at least one of the SMC ethernet
118
* parts. Both parts power up decoding the same address, so we
119
* need to move one of them first, before doing anything else.
122
static void __init nettel_smc91x_init(void)
124
writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
125
mcf_setppdata(0, 0x0080);
126
writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
127
writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
128
mcf_setppdata(0x0080, 0);
130
/* Set correct chip select timing for SMC9196 accesses */
131
writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
133
/* Set the SMC interrupts to be auto-vectored */
134
mcf_autovector(NETTEL_SMC0_IRQ);
135
mcf_autovector(NETTEL_SMC1_IRQ);
137
/* Set MAC addresses from flash for both interfaces */
138
nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
139
nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
142
/***************************************************************************/
144
static int __init init_nettel(void)
146
nettel_smc91x_init();
147
platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
151
arch_initcall(init_nettel);
153
/***************************************************************************/