2
* Intel SpeedStep SMI driver.
4
* (C) 2003 Hiroshi Miura <miura@da-cha.org>
6
* Licensed under the terms of the GNU GPL License version 2.
11
/*********************************************************************
12
* SPEEDSTEP - DEFINITIONS *
13
*********************************************************************/
15
#include <linux/kernel.h>
16
#include <linux/module.h>
17
#include <linux/moduleparam.h>
18
#include <linux/init.h>
19
#include <linux/cpufreq.h>
20
#include <linux/delay.h>
24
#include "speedstep-lib.h"
26
/* speedstep system management interface port/command.
28
* These parameters are got from IST-SMI BIOS call.
29
* If user gives it, these are used.
34
static unsigned int smi_sig;
36
/* info about the processor */
37
static enum speedstep_processor speedstep_processor;
40
* There are only two frequency states for each processor. Values
41
* are in kHz for the time being.
43
static struct cpufreq_frequency_table speedstep_freqs[] = {
46
{0, CPUFREQ_TABLE_END},
49
#define GET_SPEEDSTEP_OWNER 0
50
#define GET_SPEEDSTEP_STATE 1
51
#define SET_SPEEDSTEP_STATE 2
52
#define GET_SPEEDSTEP_FREQS 4
54
/* how often shall the SMI call be tried if it failed, e.g. because
55
* of DMA activity going on? */
58
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
62
* speedstep_smi_ownership
64
static int speedstep_smi_ownership(void)
66
u32 command, result, magic, dummy;
67
u32 function = GET_SPEEDSTEP_OWNER;
68
unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
70
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
71
magic = virt_to_phys(magic_data);
73
dprintk("trying to obtain ownership with command %x at port %x\n",
81
"=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
83
: "a" (command), "b" (function), "c" (0), "d" (smi_port),
88
dprintk("result is %x\n", result);
94
* speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
95
* @low: the low frequency value is placed here
96
* @high: the high frequency value is placed here
98
* Only available on later SpeedStep-enabled systems, returns false results or
99
* even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
100
* shows that the latter occurs if !(ist_info.event & 0xFFFF).
102
static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
104
u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
106
u32 function = GET_SPEEDSTEP_FREQS;
108
if (!(ist_info.event & 0xFFFF)) {
109
dprintk("bug #1422 -- can't read freqs from BIOS\n");
113
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
115
dprintk("trying to determine frequencies with command %x at port %x\n",
118
__asm__ __volatile__(
125
"=d" (state), "=D" (edi), "=S" (dummy)
129
"d" (smi_port), "S" (0), "D" (0)
132
dprintk("result %x, low_freq %u, high_freq %u\n",
133
result, low_mhz, high_mhz);
135
/* abort if results are obviously incorrect... */
136
if ((high_mhz + low_mhz) < 600)
139
*high = high_mhz * 1000;
140
*low = low_mhz * 1000;
146
* speedstep_get_state - set the SpeedStep state
147
* @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
150
static int speedstep_get_state(void)
152
u32 function = GET_SPEEDSTEP_STATE;
153
u32 result, state, edi, command, dummy;
155
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
157
dprintk("trying to determine current setting with command %x "
158
"at port %x\n", command, smi_port);
160
__asm__ __volatile__(
165
"=b" (state), "=D" (edi),
166
"=c" (dummy), "=d" (dummy), "=S" (dummy)
167
: "a" (command), "b" (function), "c" (0),
168
"d" (smi_port), "S" (0), "D" (0)
171
dprintk("state is %x, result is %x\n", state, result);
178
* speedstep_set_state - set the SpeedStep state
179
* @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
182
static void speedstep_set_state(unsigned int state)
184
unsigned int result = 0, command, new_state, dummy;
186
unsigned int function = SET_SPEEDSTEP_STATE;
187
unsigned int retry = 0;
193
local_irq_save(flags);
195
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
197
dprintk("trying to set frequency to state %u "
198
"with command %x at port %x\n",
199
state, command, smi_port);
203
dprintk("retry %u, previous result %u, waiting...\n",
208
__asm__ __volatile__(
212
: "=b" (new_state), "=D" (result),
213
"=c" (dummy), "=a" (dummy),
214
"=d" (dummy), "=S" (dummy)
215
: "a" (command), "b" (function), "c" (state),
216
"d" (smi_port), "S" (0), "D" (0)
218
} while ((new_state != state) && (retry <= SMI_TRIES));
221
local_irq_restore(flags);
223
if (new_state == state)
224
dprintk("change to %u MHz succeeded after %u tries "
226
(speedstep_freqs[new_state].frequency / 1000),
229
printk(KERN_ERR "cpufreq: change to state %u "
230
"failed with new_state %u and result %u\n",
231
state, new_state, result);
238
* speedstep_target - set a new CPUFreq policy
239
* @policy: new policy
240
* @target_freq: new freq
243
* Sets a new CPUFreq policy/freq.
245
static int speedstep_target(struct cpufreq_policy *policy,
246
unsigned int target_freq, unsigned int relation)
248
unsigned int newstate = 0;
249
struct cpufreq_freqs freqs;
251
if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
252
target_freq, relation, &newstate))
255
freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
256
freqs.new = speedstep_freqs[newstate].frequency;
257
freqs.cpu = 0; /* speedstep.c is UP only driver */
259
if (freqs.old == freqs.new)
262
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
263
speedstep_set_state(newstate);
264
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
271
* speedstep_verify - verifies a new CPUFreq policy
272
* @policy: new policy
274
* Limit must be within speedstep_low_freq and speedstep_high_freq, with
275
* at least one border included.
277
static int speedstep_verify(struct cpufreq_policy *policy)
279
return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
283
static int speedstep_cpu_init(struct cpufreq_policy *policy)
286
unsigned int speed, state;
287
unsigned int *low, *high;
289
/* capability check */
290
if (policy->cpu != 0)
293
result = speedstep_smi_ownership();
295
dprintk("fails in aquiring ownership of a SMI interface.\n");
299
/* detect low and high frequency */
300
low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
301
high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
303
result = speedstep_smi_get_freqs(low, high);
305
/* fall back to speedstep_lib.c dection mechanism:
306
* try both states out */
307
dprintk("could not detect low and high frequencies "
309
result = speedstep_get_freqs(speedstep_processor,
312
&speedstep_set_state);
315
dprintk("could not detect two different speeds"
319
dprintk("workaround worked.\n");
322
/* get current speed setting */
323
state = speedstep_get_state();
324
speed = speedstep_freqs[state].frequency;
326
dprintk("currently at %s speed setting - %i MHz\n",
327
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
331
/* cpuinfo and default policy values */
332
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
335
result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
339
cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
344
static int speedstep_cpu_exit(struct cpufreq_policy *policy)
346
cpufreq_frequency_table_put_attr(policy->cpu);
350
static unsigned int speedstep_get(unsigned int cpu)
354
return speedstep_get_frequency(speedstep_processor);
358
static int speedstep_resume(struct cpufreq_policy *policy)
360
int result = speedstep_smi_ownership();
363
dprintk("fails in re-aquiring ownership of a SMI interface.\n");
368
static struct freq_attr *speedstep_attr[] = {
369
&cpufreq_freq_attr_scaling_available_freqs,
373
static struct cpufreq_driver speedstep_driver = {
374
.name = "speedstep-smi",
375
.verify = speedstep_verify,
376
.target = speedstep_target,
377
.init = speedstep_cpu_init,
378
.exit = speedstep_cpu_exit,
379
.get = speedstep_get,
380
.resume = speedstep_resume,
381
.owner = THIS_MODULE,
382
.attr = speedstep_attr,
386
* speedstep_init - initializes the SpeedStep CPUFreq driver
388
* Initializes the SpeedStep support. Returns -ENODEV on unsupported
389
* BIOS, -EINVAL on problems during initiatization, and zero on
392
static int __init speedstep_init(void)
394
speedstep_processor = speedstep_detect_processor();
396
switch (speedstep_processor) {
397
case SPEEDSTEP_CPU_PIII_T:
398
case SPEEDSTEP_CPU_PIII_C:
399
case SPEEDSTEP_CPU_PIII_C_EARLY:
402
speedstep_processor = 0;
405
if (!speedstep_processor) {
406
dprintk("No supported Intel CPU detected.\n");
410
dprintk("signature:0x%.8lx, command:0x%.8lx, "
411
"event:0x%.8lx, perf_level:0x%.8lx.\n",
412
ist_info.signature, ist_info.command,
413
ist_info.event, ist_info.perf_level);
415
/* Error if no IST-SMI BIOS or no PARM
416
sig= 'ISGE' aka 'Intel Speedstep Gate E' */
417
if ((ist_info.signature != 0x47534943) && (
418
(smi_port == 0) || (smi_cmd == 0)))
422
smi_sig = 0x47534943;
424
smi_sig = ist_info.signature;
426
/* setup smi_port from MODLULE_PARM or BIOS */
427
if ((smi_port > 0xff) || (smi_port < 0))
429
else if (smi_port == 0)
430
smi_port = ist_info.command & 0xff;
432
if ((smi_cmd > 0xff) || (smi_cmd < 0))
434
else if (smi_cmd == 0)
435
smi_cmd = (ist_info.command >> 16) & 0xff;
437
return cpufreq_register_driver(&speedstep_driver);
442
* speedstep_exit - unregisters SpeedStep support
444
* Unregisters SpeedStep support.
446
static void __exit speedstep_exit(void)
448
cpufreq_unregister_driver(&speedstep_driver);
451
module_param(smi_port, int, 0444);
452
module_param(smi_cmd, int, 0444);
453
module_param(smi_sig, uint, 0444);
455
MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
456
"-- Intel's default setting is 0xb2");
457
MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
458
"-- Intel's default setting is 0x82");
459
MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
462
MODULE_AUTHOR("Hiroshi Miura");
463
MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
464
MODULE_LICENSE("GPL");
466
module_init(speedstep_init);
467
module_exit(speedstep_exit);