2
* Radio tuning for Maxim max2820 on RTL8180
4
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
6
* Modified slightly for iPXE, June 2009 by Joshua Oreman.
8
* Code from the BSD driver and the rtl8181 project have been
9
* very useful to understand certain things
11
* I want to thanks the Authors of such projects and the Ndiswrapper
14
* A special Big Thanks also is for all people who donated me cards,
15
* making possible the creation of the original rtl8180 driver
16
* from which this code is derived!
18
* This program is free software; you can redistribute it and/or modify
19
* it under the terms of the GNU General Public License version 2 as
20
* published by the Free Software Foundation.
25
#include <ipxe/net80211.h>
29
FILE_LICENCE(GPL2_ONLY);
31
#define MAXIM_ANTENNA 0xb3
33
static const u32 max2820_chan[] = {
50
static void write_max2820(struct net80211_device *dev, u8 addr, u32 data)
52
struct rtl818x_priv *priv = dev->priv;
55
phy_config = 0x90 + (data & 0xf);
59
phy_config += (data >> 4) & 0xff;
61
/* This was originally a 32-bit write to a typecast
62
RFPinsOutput, but gcc complained about aliasing rules. -JBO */
63
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, phy_config & 0xffff);
64
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, phy_config >> 16);
69
static void max2820_write_phy_antenna(struct net80211_device *dev, short chan)
71
struct rtl818x_priv *priv = dev->priv;
75
if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
78
ant |= BB_ANTATTEN_CHAN14;
80
rtl818x_write_phy(dev, 0x10, ant);
83
static void max2820_rf_set_channel(struct net80211_device *dev,
84
struct net80211_channel *channelp)
86
struct rtl818x_priv *priv = dev->priv;
87
int channel = channelp->channel_nr;
88
unsigned int chan_idx = channel - 1;
89
u32 txpw = priv->txpower[chan_idx] & 0xFF;
90
u32 chan = max2820_chan[chan_idx];
92
/* While philips SA2400 drive the PA bias from
93
* sa2400, for MAXIM we do this directly from BB */
94
rtl818x_write_phy(dev, 3, txpw);
96
max2820_write_phy_antenna(dev, channel);
97
write_max2820(dev, 3, chan);
100
static void max2820_rf_stop(struct net80211_device *dev)
102
rtl818x_write_phy(dev, 3, 0x8);
103
write_max2820(dev, 1, 0);
107
static void max2820_rf_init(struct net80211_device *dev)
109
struct rtl818x_priv *priv = dev->priv;
111
/* MAXIM from netbsd driver */
112
write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */
113
write_max2820(dev, 1, 0x01e); /* enable register */
114
write_max2820(dev, 2, 0x001); /* synt register */
116
max2820_rf_set_channel(dev, NULL);
118
write_max2820(dev, 4, 0x313); /* rx register */
120
/* PA is driven directly by the BB, we keep the MAXIM bias
121
* at the highest value in case that setting it to lower
122
* values may introduce some further attenuation somewhere..
124
write_max2820(dev, 5, 0x00f);
126
/* baseband configuration */
127
rtl818x_write_phy(dev, 0, 0x88); /* sys1 */
128
rtl818x_write_phy(dev, 3, 0x08); /* txagc */
129
rtl818x_write_phy(dev, 4, 0xf8); /* lnadet */
130
rtl818x_write_phy(dev, 5, 0x90); /* ifagcinit */
131
rtl818x_write_phy(dev, 6, 0x1a); /* ifagclimit */
132
rtl818x_write_phy(dev, 7, 0x64); /* ifagcdet */
134
max2820_write_phy_antenna(dev, 1);
136
rtl818x_write_phy(dev, 0x11, 0x88); /* trl */
138
if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
139
RTL818X_CONFIG2_ANTENNA_DIV)
140
rtl818x_write_phy(dev, 0x12, 0xc7);
142
rtl818x_write_phy(dev, 0x12, 0x47);
144
rtl818x_write_phy(dev, 0x13, 0x9b);
146
rtl818x_write_phy(dev, 0x19, 0x0); /* CHESTLIM */
147
rtl818x_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM */
149
max2820_rf_set_channel(dev, NULL);
152
struct rtl818x_rf_ops max2820_rf_ops __rtl818x_rf_driver = {
153
.name = "Maxim max2820",
155
.init = max2820_rf_init,
156
.stop = max2820_rf_stop,
157
.set_chan = max2820_rf_set_channel