2
* (C) Copyright 2011-2012
3
* Pali Rohár <pali.rohar@gmail.com>
6
* Alistair Buxton <a.j.buxton@gmail.com>
8
* Derived from Beagle Board code:
9
* (C) Copyright 2006-2008
11
* Richard Woodruff <r-woodruff2@ti.com>
12
* Syed Mohammed Khasim <x0khasim@ti.com>
14
* Configuration settings for the Nokia RX-51 aka N900.
16
* SPDX-License-Identifier: GPL-2.0+
23
* High Level Configuration Options
26
#define CONFIG_OMAP /* in a TI OMAP core */
27
#define CONFIG_OMAP34XX /* which is a 34XX */
28
#define CONFIG_OMAP3430 /* which is in a 3430 */
29
#define CONFIG_OMAP3_RX51 /* working with RX51 */
30
#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
31
#define CONFIG_OMAP_COMMON
33
#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
36
* Nokia X-Loader loading secondary image to address 0x80400000
37
* NOLO loading boot image to random place, so it doesn't really
38
* matter what we set this to. We have to copy u-boot to this address
40
#define CONFIG_SYS_TEXT_BASE 0x80008000
42
#define CONFIG_SDRC /* The chip has SDRC controller */
44
#include <asm/arch/cpu.h> /* get chip and board defs */
45
#include <asm/arch/omap3.h>
46
#include <asm/arch/mem.h>
47
#include <linux/stringify.h>
50
* Display CPU and Board information
52
#define CONFIG_DISPLAY_CPUINFO
53
#define CONFIG_DISPLAY_BOARDINFO
56
#define V_OSCK 26000000 /* Clock output from T2 */
57
#define V_SCLK (V_OSCK >> 1)
59
#undef CONFIG_USE_IRQ /* no support for IRQs */
60
#define CONFIG_MISC_INIT_R
61
#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
63
#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
64
#define CONFIG_INITRD_TAG /* enable passing initrd */
65
#define CONFIG_REVISION_TAG /* enable passing revision tag*/
66
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
69
* Size of malloc() pool
71
#define CONFIG_ENV_SIZE (128 << 10)
72
#define CONFIG_UBI_SIZE (512 << 10)
73
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
81
* NS16550 Configuration
83
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
85
#define CONFIG_SYS_NS16550
86
#define CONFIG_SYS_NS16550_SERIAL
87
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
88
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
91
* select serial console configuration
93
#define CONFIG_CONS_INDEX 3
94
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
95
#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
97
/* allow to overwrite serial and ethaddr */
98
#define CONFIG_ENV_OVERWRITE
99
#define CONFIG_BAUDRATE 115200
100
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
102
#define CONFIG_GENERIC_MMC
103
#define CONFIG_OMAP_HSMMC
104
#define CONFIG_DOS_PARTITION
107
#define CONFIG_MUSB_UDC
108
#define CONFIG_MUSB_HDC
109
#define CONFIG_USB_OMAP3
110
#define CONFIG_TWL4030_USB
112
/* USB device configuration */
113
#define CONFIG_USB_DEVICE
114
#define CONFIG_USBD_VENDORID 0x0421
115
#define CONFIG_USBD_PRODUCTID 0x01c8
116
#define CONFIG_USBD_MANUFACTURER "Nokia"
117
#define CONFIG_USBD_PRODUCT_NAME "N900"
119
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
120
#define CONFIG_SYS_NO_FLASH
122
/* commands to include */
123
#include <config_cmd_default.h>
125
#define CONFIG_CMD_EXT2 /* EXT2 Support */
126
#define CONFIG_CMD_EXT4 /* EXT4 Support */
127
#define CONFIG_CMD_FAT /* FAT support */
129
#define CONFIG_CMD_I2C /* I2C serial bus support */
130
#define CONFIG_CMD_MMC /* MMC support */
131
#define CONFIG_CMD_GPIO /* Enable gpio command */
133
#define CONFIG_CMDLINE_EDITING /* add command line history */
134
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
136
#define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
137
#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
139
#ifdef ONENAND_SUPPORT
141
#define CONFIG_CMD_ONENAND /* ONENAND support */
142
#define CONFIG_CMD_MTDPARTS /* mtd parts support */
145
#define CONFIG_CMD_UBI /* UBI Support */
146
#define CONFIG_CMD_UBIFS /* UBIFS Support */
151
/* commands not needed from config_cmd_default.h */
152
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
153
#undef CONFIG_CMD_IMI /* iminfo */
154
#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
155
#undef CONFIG_CMD_NFS /* NFS support */
156
#undef CONFIG_CMD_SAVEENV /* saveenv */
157
#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
159
#define CONFIG_OMAP3_SPI
160
#define CONFIG_SYS_I2C
161
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
162
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
163
#define CONFIG_SYS_I2C_OMAP34XX
168
#define CONFIG_TWL4030_POWER
169
#define CONFIG_TWL4030_LED
170
#define CONFIG_TWL4030_KEYPAD
172
#define CONFIG_OMAP_GPIO
173
#define GPIO_SLIDE 71
176
* Board ONENAND Info.
179
#define PART1_NAME "bootloader"
180
#define PART1_SIZE 128
181
#define PART1_MULL 1024
182
#define PART1_SUFF "k"
183
#define PART1_OFFS 0x00000000
184
#define PART1_MASK 0x00000003
186
#define PART2_NAME "config"
187
#define PART2_SIZE 384
188
#define PART2_MULL 1024
189
#define PART2_SUFF "k"
190
#define PART2_OFFS 0x00020000
191
#define PART2_MASK 0x00000000
193
#define PART3_NAME "log"
194
#define PART3_SIZE 256
195
#define PART3_MULL 1024
196
#define PART3_SUFF "k"
197
#define PART3_OFFS 0x00080000
198
#define PART3_MASK 0x00000000
200
#define PART4_NAME "kernel"
202
#define PART4_MULL 1024*1024
203
#define PART4_SUFF "m"
204
#define PART4_OFFS 0x000c0000
205
#define PART4_MASK 0x00000000
207
#define PART5_NAME "initfs"
209
#define PART5_MULL 1024*1024
210
#define PART5_SUFF "m"
211
#define PART5_OFFS 0x002c0000
212
#define PART5_MASK 0x00000000
214
#define PART6_NAME "rootfs"
215
#define PART6_SIZE 257280
216
#define PART6_MULL 1024
217
#define PART6_SUFF "k"
218
#define PART6_OFFS 0x004c0000
219
#define PART6_MASK 0x00000000
221
#ifdef ONENAND_SUPPORT
223
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
224
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
225
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
226
#define CONFIG_MTD_DEVICE
227
#define CONFIG_MTD_PARTITIONS
230
#define CONFIG_RBTREE
234
#define MTDIDS_DEFAULT "onenand0=onenand"
235
#define MTDPARTS_DEFAULT "mtdparts=onenand:" \
236
__stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
237
__stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
238
__stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
239
__stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
240
__stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
245
/* Watchdog support */
246
#define CONFIG_HW_WATCHDOG
253
#define CONFIG_CFB_CONSOLE
254
#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
255
#define CONFIG_VIDEO_LOGO
256
#define VIDEO_FB_16BPP_PIXEL_SWAP
257
#define VIDEO_FB_16BPP_WORD_SWAP
258
#define CONFIG_VIDEO_SW_CURSOR
259
#define CONFIG_SPLASH_SCREEN
261
/* functions for cfb_console */
262
#define VIDEO_KBD_INIT_FCT rx51_kp_init()
263
#define VIDEO_TSTC_FCT rx51_kp_tstc
264
#define VIDEO_GETC_FCT rx51_kp_getc
266
int rx51_kp_init(void);
267
int rx51_kp_tstc(void);
268
int rx51_kp_getc(void);
271
#ifndef MTDPARTS_DEFAULT
272
#define MTDPARTS_DEFAULT
275
/* Environment information */
276
#define CONFIG_EXTRA_ENV_SETTINGS \
277
"mtdparts=" MTDPARTS_DEFAULT "\0" \
282
"setcon=setenv stdin ${con};" \
283
"setenv stdout ${con};" \
284
"setenv stderr ${con}\0" \
285
"sercon=setenv con serial; run setcon\0" \
286
"usbcon=setenv con usbtty; run setcon\0" \
287
"vgacon=setenv con vga; run setcon\0" \
288
"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
289
"switchmmc=mmc dev ${mmcnum}\0" \
290
"kernaddr=0x82008000\0" \
291
"initrdaddr=0x84008000\0" \
292
"scriptaddr=0x86008000\0" \
293
"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
294
"${loadaddr} ${mmcfile}\0" \
295
"kernload=setenv loadaddr ${kernaddr};" \
296
"setenv mmcfile ${mmckernfile};" \
298
"initrdload=setenv loadaddr ${initrdaddr};" \
299
"setenv mmcfile ${mmcinitrdfile};" \
301
"scriptload=setenv loadaddr ${scriptaddr};" \
302
"setenv mmcfile ${mmcscriptfile};" \
304
"scriptboot=echo Running ${mmcscriptfile} from mmc " \
305
"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
306
"kernboot=echo Booting ${mmckernfile} from mmc " \
307
"${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
308
"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
309
"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
310
"attachboot=echo Booting attached kernel image ...;" \
311
"setenv setup_omap_atag 1;" \
312
"bootm ${attkernaddr};" \
313
"setenv setup_omap_atag\0" \
314
"trymmcscriptboot=if run switchmmc; then " \
315
"if run scriptload; then " \
319
"trymmckernboot=if run switchmmc; then " \
320
"if run kernload; then " \
324
"trymmckerninitrdboot=if run switchmmc; then " \
325
"if run initrdload; then " \
326
"if run kernload; then " \
327
"run kerninitrdboot;" \
331
"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
332
"setenv mmckernfile uImage; run trymmckernboot\0" \
333
"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
334
"setenv mmcpart 2; run trymmcpartboot;" \
335
"setenv mmcpart 3; run trymmcpartboot;" \
336
"setenv mmcpart 4; run trymmcpartboot\0" \
337
"trymmcboot=if run switchmmc; then " \
338
"setenv mmctype fat;" \
339
"run trymmcallpartboot;" \
340
"setenv mmctype ext2;" \
341
"run trymmcallpartboot;" \
342
"setenv mmctype ext4;" \
343
"run trymmcallpartboot;" \
345
"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
346
"sdboot=setenv mmcnum 0; run trymmcboot\0" \
347
"menucmd=bootmenu\0" \
348
"bootmenu_0=Attached kernel=run attachboot\0" \
349
"bootmenu_1=Internal eMMC=run emmcboot\0" \
350
"bootmenu_2=External SD card=run sdboot\0" \
351
"bootmenu_3=U-Boot boot order=boot\0" \
352
"bootmenu_delay=30\0" \
355
#define CONFIG_PREBOOT \
356
"setenv mmcnum 1; setenv mmcpart 1;" \
357
"setenv mmcscriptfile bootmenu.scr;" \
358
"if run switchmmc; then " \
359
"setenv mmcdone true;" \
360
"setenv mmctype fat;" \
361
"if run scriptload; then true; else " \
362
"setenv mmctype ext2;" \
363
"if run scriptload; then true; else " \
364
"setenv mmctype ext4;" \
365
"if run scriptload; then true; else " \
366
"setenv mmcdone false;" \
370
"if ${mmcdone}; then " \
374
"if run slide; then true; else " \
375
"setenv bootmenu_delay 0;" \
376
"setenv bootdelay 0;" \
379
#define CONFIG_POSTBOOTMENU \
381
"echo Extra commands:;" \
382
"echo run sercon - Use serial port for control.;" \
383
"echo run usbcon - Use usbtty for control.;" \
384
"echo run vgacon - Use framebuffer/keyboard.;" \
385
"echo run sdboot - Boot from SD card slot.;" \
386
"echo run emmcboot - Boot internal eMMC memory.;" \
387
"echo run attachboot - Boot attached kernel image.;" \
390
#define CONFIG_BOOTCOMMAND \
396
#define CONFIG_BOOTDELAY 30
397
#define CONFIG_AUTOBOOT_KEYED
399
#define CONFIG_MENU_SHOW
402
* Miscellaneous configurable options
404
#define CONFIG_SYS_LONGHELP /* undef to save memory */
405
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
406
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
407
#define CONFIG_SYS_PROMPT "Nokia RX-51 # "
408
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
409
/* Print Buffer Size */
410
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
411
sizeof(CONFIG_SYS_PROMPT) + 16)
412
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
413
/* Boot Argument Buffer Size */
414
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
416
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
417
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
419
/* default load address */
420
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
423
* OMAP3 has 12 GP timers, they can be driven by the system clock
424
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
425
* This rate is divided by a local divisor.
427
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
428
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
433
* The stack sizes are set up in start.S using the settings below
435
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
438
* Physical Memory Map
440
#define CONFIG_NR_DRAM_BANKS 2
441
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
444
* FLASH and environment organization
447
#define CONFIG_ENV_IS_NOWHERE
449
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
450
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
451
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
452
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
453
CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
456
* Attached kernel image
459
#define SDRAM_SIZE 0x10000000 /* 256 MB */
460
#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
462
#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
463
#define KERNEL_OFFSET 0x40000 /* 256 kB */
464
#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
465
#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
467
/* Reserve protected RAM for attached kernel */
468
#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
470
#endif /* __CONFIG_H */