2
* U-boot - Configuration file for BF526 EZBrd board
5
#ifndef __CONFIG_BF526_EZBRD_H__
6
#define __CONFIG_BF526_EZBRD_H__
8
#include <asm/config-pre.h>
14
#define CONFIG_BFIN_CPU bf526-0.0
15
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
20
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
23
/* CONFIG_CLKIN_HZ is any value in Hz */
24
#define CONFIG_CLKIN_HZ 25000000
25
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
27
#define CONFIG_CLKIN_HALF 0
28
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
30
#define CONFIG_PLL_BYPASS 0
31
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32
/* Values can range from 0-63 (where 0 means 64) */
33
#define CONFIG_VCO_MULT 16
34
/* CCLK_DIV controls the core clock divider */
35
/* Values can be 1, 2, 4, or 8 ONLY */
36
#define CONFIG_CCLK_DIV 1
37
/* SCLK_DIV controls the system clock divider */
38
/* Values can range from 1-15 */
39
#define CONFIG_SCLK_DIV 5
45
/* This board has a 64meg MT48H32M16 */
46
#define CONFIG_MEM_ADD_WDTH 10
47
#define CONFIG_MEM_SIZE 64
49
#define CONFIG_EBIU_SDRRC_VAL 0x0267
50
#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_2 | PASR_ALL | TRAS_6 | TRP_4 | TRCD_2 | TWR_2 | PSS)
52
#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL)
53
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
54
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
56
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
57
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
62
* (can't be used same time as ethernet)
64
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
65
# define CONFIG_BFIN_NFC
66
# define CONFIG_BFIN_NFC_BOOTROM_ECC
68
#ifdef CONFIG_BFIN_NFC
69
#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
70
#define CONFIG_DRIVER_NAND_BFIN
71
#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
72
#define CONFIG_SYS_MAX_NAND_DEVICE 1
73
#define CONFIG_CMD_NAND
80
#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \
81
!defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC)
82
#define ADI_CMDS_NETWORK 1
83
#define CONFIG_BFIN_MAC
85
#define CONFIG_NETCONSOLE 1
87
#define CONFIG_HOSTNAME bf526-ezbrd
88
/* Uncomment next line to use fixed MAC address */
89
/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
90
#define CONFIG_LIB_RAND
95
#define CONFIG_FLASH_CFI_DRIVER
96
#define CONFIG_SYS_FLASH_BASE 0x20000000
97
#define CONFIG_SYS_FLASH_CFI
98
#define CONFIG_SYS_FLASH_PROTECTION
99
#define CONFIG_SYS_MAX_FLASH_BANKS 1
100
#define CONFIG_SYS_MAX_FLASH_SECT 71
106
#define CONFIG_BFIN_SPI
107
#define CONFIG_ENV_SPI_MAX_HZ 30000000
108
#define CONFIG_SF_DEFAULT_SPEED 30000000
109
#define CONFIG_SPI_FLASH
110
#define CONFIG_SPI_FLASH_SST
114
* Env Storage Settings
116
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
117
#define CONFIG_ENV_IS_IN_SPI_FLASH
118
#define CONFIG_ENV_OFFSET 0x4000
119
#define CONFIG_ENV_SIZE 0x2000
120
#define CONFIG_ENV_SECT_SIZE 0x2000
122
#define CONFIG_ENV_IS_IN_FLASH
123
#define CONFIG_ENV_OFFSET 0x4000
124
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
125
#define CONFIG_ENV_SIZE 0x2000
126
#define CONFIG_ENV_SECT_SIZE 0x2000
128
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
134
#define CONFIG_BFIN_TWI_I2C 1
135
#define CONFIG_HARD_I2C 1
141
#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
143
#define CONFIG_MUSB_HCD
144
#define CONFIG_USB_BLACKFIN
145
#define CONFIG_USB_STORAGE
146
#define CONFIG_MUSB_TIMEOUT 100000
153
#define CONFIG_MISC_INIT_R
154
#define CONFIG_RTC_BFIN
155
#define CONFIG_UART_CONSOLE 1
156
#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
158
/* define to enable run status via led */
159
/* #define CONFIG_STATUS_LED */
160
#ifdef CONFIG_STATUS_LED
161
#define CONFIG_GPIO_LED
162
#define CONFIG_BOARD_SPECIFIC_LED
163
/* use LED0 to indicate booting/alive */
164
#define STATUS_LED_BOOT 0
165
#define STATUS_LED_BIT GPIO_PF8
166
#define STATUS_LED_STATE STATUS_LED_ON
167
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
168
/* use LED1 to indicate crash */
169
#define STATUS_LED_CRASH 1
170
#define STATUS_LED_BIT1 GPIO_PG11
171
#define STATUS_LED_STATE1 STATUS_LED_ON
172
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
173
/* #define STATUS_LED_BIT2 GPIO_PG12 */
178
* Pull in common ADI header for remaining command/environment setup
180
#include <configs/bfin_adi_common.h>