2
* Xilinx xps_ll_temac ethernet driver for u-boot
6
* Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
7
* Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
8
* Copyright (C) 2008 - 2011 PetaLogix
10
* Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
11
* Copyright (C) 2008 Nissin Systems Co.,Ltd.
14
* CREDITS: tsec driver
16
* SPDX-License-Identifier: GPL-2.0+
18
* [0]: http://www.xilinx.com/support/documentation
20
* [F]: [0]/ip_documentation/xps_ll_fifo.pdf
21
* [S]: [0]/ip_documentation/xps_ll_temac.pdf
22
* [A]: [0]/application_notes/xapp1041.pdf
29
#include <asm/types.h>
32
#include "xilinx_ll_temac.h"
33
#include "xilinx_ll_temac_fifo.h"
35
int ll_temac_reset_fifo(struct eth_device *dev)
37
struct ll_temac *ll_temac = dev->priv;
38
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
40
out_be32(&fifo_ctrl->tdfr, LL_FIFO_TDFR_KEY);
41
out_be32(&fifo_ctrl->rdfr, LL_FIFO_RDFR_KEY);
42
out_be32(&fifo_ctrl->isr, ~0UL);
43
out_be32(&fifo_ctrl->ier, 0);
48
int ll_temac_recv_fifo(struct eth_device *dev)
51
u32 *buf = (u32 *)NetRxPackets[0];
52
struct ll_temac *ll_temac = dev->priv;
53
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
55
if (in_be32(&fifo_ctrl->isr) & LL_FIFO_ISR_RC) {
58
out_be32(&fifo_ctrl->isr, ~0UL);
62
* while (fifo_ctrl->isr);
66
* The length is written (into RLR) by the XPS LL FIFO
67
* when the packet is received across the RX LocalLink
68
* interface and the receive data FIFO had enough
69
* locations that all of the packet data has been saved.
70
* The RLR should only be read when a receive packet is
71
* available for processing (the receive occupancy is
72
* not zero). Once the RLR is read, the receive packet
73
* data should be read from the receive data FIFO before
74
* the RLR is read again.
76
* [F] page 17, Receive Length Register (RLR)
78
if (in_be32(&fifo_ctrl->rdfo) & LL_FIFO_RDFO_MASK) {
79
length = in_be32(&fifo_ctrl->rlf) & LL_FIFO_RLF_MASK;
81
printf("%s: Got error, no receive occupancy\n",
86
if (length > PKTSIZE_ALIGN) {
87
printf("%s: Got error, receive package too big (%i)\n",
89
ll_temac_reset_fifo(dev);
93
for (i = 0; i < length; i += 4)
94
*buf++ = in_be32(&fifo_ctrl->rdfd);
96
NetReceive(NetRxPackets[0], length);
102
int ll_temac_send_fifo(struct eth_device *dev, void *packet, int length)
105
u32 *buf = (u32 *)packet;
106
struct ll_temac *ll_temac = dev->priv;
107
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
109
if (length < LL_FIFO_TLF_MIN) {
110
printf("%s: Got error, transmit package too small (%i)\n",
115
if (length > LL_FIFO_TLF_MAX) {
116
printf("%s: Got error, transmit package too big (%i)\n",
121
for (i = 0; i < length; i += 4)
122
out_be32(&fifo_ctrl->tdfd, *buf++);
125
* Once the packet length is written to the TLR it is
126
* automatically moved to the transmit data FIFO with
127
* the packet data freeing up the TLR for another value.
128
* The packet length must be written to the TLR after
129
* the packet data is written to the transmit data FIFO.
130
* It is not valid to write data for multiple packets
131
* to the transmit data FIFO before writing the packet
134
* [F] page 17, Transmit Length Register (TLR)
136
out_be32(&fifo_ctrl->tlf, length);