2
* Copyright 2013 Freescale Semiconductor, Inc.
4
* SPDX-License-Identifier: GPL-2.0+
11
#define ESPI_BOOT_IMAGE_SIZE 0x48
12
#define ESPI_BOOT_IMAGE_ADDR 0x50
13
#define CONFIG_CFG_DATA_SECTOR 0
15
void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
17
struct spi_flash *flash;
19
flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
20
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
22
puts("\nspi_flash_probe failed");
26
spi_flash_read(flash, offs, size, vdst);
30
* The main entry for SPI booting. It's necessary that SDRAM is already
31
* configured and available since this code loads the main U-Boot image
32
* from SPI into SDRAM and starts it from there.
36
void (*uboot)(void) __noreturn;
37
u32 offset, code_len, copy_len = 0;
38
#ifndef CONFIG_FSL_CORENET
39
unsigned char *buf = NULL;
41
struct spi_flash *flash;
43
flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
44
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
46
puts("\nspi_flash_probe failed");
50
#ifdef CONFIG_FSL_CORENET
51
offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
52
code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE;
55
* Load U-Boot image from SPI flash into RAM
57
buf = malloc(flash->page_size);
59
puts("\nmalloc failed");
62
memset(buf, 0, flash->page_size);
64
spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
65
flash->page_size, (void *)buf);
66
offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
68
offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
69
/* Get the code size from offset 0x48 */
70
code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
72
code_len = code_len - CONFIG_SPL_MAX_SIZE;
74
/* copy code to DDR */
75
printf("Loading second stage boot loader ");
76
while (copy_len <= code_len) {
77
spi_flash_read(flash, offset + copy_len, 0x2000,
78
(void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST
80
copy_len = copy_len + 0x2000;
85
* Jump to U-Boot image
87
flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
88
uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;