2
* Copyright 2009-2011 Freescale Semiconductor, Inc.
4
* SPDX-License-Identifier: GPL-2.0+
10
#include <linux/compiler.h>
12
#include <asm/processor.h>
13
#include <asm/cache.h>
14
#include <asm/immap_85xx.h>
15
#include <asm/fsl_law.h>
16
#include <asm/fsl_serdes.h>
17
#include <asm/fsl_portals.h>
18
#include <asm/fsl_liodn.h>
21
#include "../common/ngpixis.h"
22
#include "corenet_ds.h"
24
DECLARE_GLOBAL_DATA_PTR;
29
struct cpu_type *cpu = gd->arch.cpu;
30
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) || \
31
defined(CONFIG_P5040DS)
34
static const char * const freq[] = {"100", "125", "156.25", "212.5" };
36
printf("Board: %sDS, ", cpu->name);
37
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
38
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
40
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
41
sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
44
printf("vBank: %d\n", sw);
50
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
52
/* Display the actual SERDES reference clocks as configured by the
53
* dip switches on the board. Note that the SWx registers could
54
* technically be set to force the reference clocks to match the
55
* values that the SERDES expects (or vice versa). For now, however,
56
* we just display both values and hope the user notices when they
59
puts("SERDES Reference Clocks: ");
60
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
61
|| defined(CONFIG_P5040DS)
62
sw = in_8(&PIXIS_SW(5));
63
for (i = 0; i < 3; i++) {
64
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
66
printf("Bank%u=%sMhz ", i+1, freq[clock]);
69
/* On P5040DS, SW11[7:8] determines the Bank 4 frequency */
70
sw = in_8(&PIXIS_SW(9));
71
printf("Bank4=%sMhz ", freq[sw & 3]);
75
sw = in_8(&PIXIS_SW(3));
76
/* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */
77
/* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */
78
/* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */
79
printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]);
80
printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]);
81
printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]);
87
int board_early_init_f(void)
89
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
92
* P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3
93
* disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce
94
* the noise introduced by these unterminated and unused clock pairs.
96
setbits_be32(&gur->ddrclkdr, 0x001B001B);
101
int board_early_init_r(void)
103
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
104
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
107
* Remap Boot flash + PROMJET region to caching-inhibited
108
* so that flash can be erased properly.
111
/* Flush d-cache and invalidate i-cache of any FLASH data */
115
/* invalidate existing TLB entry for flash + promjet */
116
disable_tlb(flash_esel);
118
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
119
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
120
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
123
#ifdef CONFIG_SYS_DPAA_QBMAN
130
#define NUM_SRDS_BANKS 3
132
int misc_init_r(void)
134
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
135
u32 actual[NUM_SRDS_BANKS];
139
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
140
|| defined(CONFIG_P5040DS)
141
sw = in_8(&PIXIS_SW(5));
142
for (i = 0; i < 3; i++) {
143
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
146
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
149
actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
152
actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
155
printf("Warning: SDREFCLK%u switch setting of '11' is "
156
"unsupported\n", i + 1);
161
/* Warn if the expected SERDES reference clocks don't match the
162
* actual reference clocks. This needs to be done after calling
163
* p4080_erratum_serdes8(), since that function may modify the clocks.
165
sw = in_8(&PIXIS_SW(3));
166
actual[0] = (sw & 0x40) ?
167
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
168
actual[1] = (sw & 0x20) ?
169
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
170
actual[2] = (sw & 0x10) ?
171
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
174
for (i = 0; i < NUM_SRDS_BANKS; i++) {
175
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
176
if (expected != actual[i]) {
177
printf("Warning: SERDES bank %u expects reference clock"
178
" %sMHz, but actual is %sMHz\n", i + 1,
179
serdes_clock_to_string(expected),
180
serdes_clock_to_string(actual[i]));
187
void ft_board_setup(void *blob, bd_t *bd)
192
ft_cpu_setup(blob, bd);
194
base = getenv_bootm_low();
195
size = getenv_bootm_size();
197
fdt_fixup_memory(blob, (u64)base, (u64)size);
200
pci_of_setup(blob, bd);
203
fdt_fixup_liodn(blob);
204
fdt_fixup_dr_usb(blob, bd);
206
#ifdef CONFIG_SYS_DPAA_FMAN
207
fdt_fixup_fman_ethernet(blob);
208
fdt_fixup_board_enet(blob);