2
* U-boot - Configuration file for BF609 EZ-Kit board
5
#ifndef __CONFIG_BF609_EZKIT_H__
6
#define __CONFIG_BF609_EZKIT_H__
8
#include <asm/config-pre.h>
13
#define CONFIG_BFIN_CPU bf609-0.0
14
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
17
/* For ez-board version 1.0, else undef this */
18
#define CONFIG_BFIN_BOARD_VERSION_1_0
22
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
23
* SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV
24
* SCLK0 = SCLK / SCLK0_DIV
25
* SCLK1 = SCLK / SCLK1_DIV
27
/* CONFIG_CLKIN_HZ is any value in Hz */
28
#define CONFIG_CLKIN_HZ (25000000)
29
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
31
#define CONFIG_CLKIN_HALF (0)
33
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
34
/* Values can range from 0-127 (where 0 means 128) */
35
#define CONFIG_VCO_MULT (20)
37
/* CCLK_DIV controls the core clock divider */
38
/* Values can range from 0-31 (where 0 means 32) */
39
#define CONFIG_CCLK_DIV (1)
40
/* SCLK_DIV controls the system clock divider */
41
/* Values can range from 0-31 (where 0 means 32) */
42
#define CONFIG_SCLK_DIV (4)
43
/* Values can range from 0-7 (where 0 means 8) */
44
#define CONFIG_SCLK0_DIV (1)
45
#define CONFIG_SCLK1_DIV (1)
46
/* DCLK_DIV controls the DDR clock divider */
47
/* Values can range from 0-31 (where 0 means 32) */
48
#define CONFIG_DCLK_DIV (2)
49
/* OCLK_DIV controls the output clock divider */
50
/* Values can range from 0-127 (where 0 means 128) */
51
#define CONFIG_OCLK_DIV (16)
56
#define CONFIG_MEM_SIZE 128
58
#define CONFIG_SMC_GCTL_VAL 0x00000010
59
#define CONFIG_SMC_B0CTL_VAL 0x01007011
60
#define CONFIG_SMC_B0TIM_VAL 0x08170977
61
#define CONFIG_SMC_B0ETIM_VAL 0x00092231
63
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
64
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
66
#define CONFIG_HW_WATCHDOG
70
#define ADI_CMDS_NETWORK
71
#define CONFIG_NETCONSOLE
72
#define CONFIG_NET_MULTI
73
#define CONFIG_HOSTNAME "bf609-ezkit"
74
#define CONFIG_DESIGNWARE_ETH
75
#define CONFIG_PHY_ADDR 1
76
#define CONFIG_DW_PORTS 1
77
#define CONFIG_DW_ALTDESCRIPTOR
78
#define CONFIG_CMD_NET
79
#define CONFIG_CMD_MII
84
#define CONFIG_BFIN_TWI_I2C
85
#define CONFIG_HARD_I2C
90
#undef CONFIG_CMD_IMLS
91
#undef CONFIG_CMD_JFFS2
92
#define CONFIG_SYS_FLASH_CFI_WIDTH 2
93
#define CONFIG_FLASH_CFI_DRIVER
94
#define CONFIG_SYS_FLASH_BASE 0xb0000000
95
#define CONFIG_SYS_FLASH_CFI
96
#define CONFIG_SYS_FLASH_PROTECTION
97
#define CONFIG_SYS_MAX_FLASH_BANKS 1
98
#define CONFIG_SYS_MAX_FLASH_SECT 131
99
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
104
#define CONFIG_BFIN_SPI6XX
105
#define CONFIG_ENV_SPI_MAX_HZ 25000000
106
#define CONFIG_SF_DEFAULT_SPEED 25000000
107
#define CONFIG_SPI_FLASH
108
#define CONFIG_SPI_FLASH_ALL
111
* Env Storage Settings
113
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
114
#define CONFIG_ENV_IS_IN_SPI_FLASH
115
#define CONFIG_ENV_OFFSET 0x10000
116
#define CONFIG_ENV_SIZE 0x2000
117
#define CONFIG_ENV_SECT_SIZE 0x10000
118
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
119
#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
120
#define CONFIG_ENV_IS_IN_NAND
121
#define CONFIG_ENV_OFFSET 0x60000
122
#define CONFIG_ENV_SIZE 0x20000
124
#define CONFIG_ENV_IS_IN_FLASH
125
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
126
#define CONFIG_ENV_OFFSET 0x8000
127
#define CONFIG_ENV_SIZE 0x8000
128
#define CONFIG_ENV_SECT_SIZE 0x8000
129
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
132
#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0"
137
#define CONFIG_GENERIC_MMC
139
#define CONFIG_BFIN_SDH
144
#define CONFIG_BOARD_EARLY_INIT_F
145
#define CONFIG_UART_CONSOLE 0
147
#define CONFIG_CMD_MEMORY
148
#define CONFIG_CMD_SOFTSWITCH
150
#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4)
151
#define CONFIG_BFIN_SOFT_SWITCH
153
#define CONFIG_ADI_GPIO2
156
#define CONFIG_UART_MEM 1024
157
#undef CONFIG_UART_CONSOLE
158
#undef CONFIG_JTAG_CONSOLE
159
#undef CONFIG_UART_CONSOLE_IS_JTAG
162
#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024))
165
* Run core 1 from L1 SRAM start address when init uboot on core 0
167
/* #define CONFIG_CORE1_RUN 1 */
170
* Pull in common ADI header for remaining command/environment setup
172
#include <configs/bfin_adi_common.h>