5
* Texas Instruments, <www.ti.com>
7
* Aneesh V <aneesh@ti.com> for OMAP4
9
* SPDX-License-Identifier: GPL-2.0+
14
#include <asm/arch/sys_proto.h>
15
#include <asm/utils.h>
17
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
18
#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
19
static u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM;
20
static u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN;
23
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
24
/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
25
static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
26
.max_freq = 532000000,
49
* Min tCK values specified by JESD209-2
50
* Min tCK specifies the minimum duration of some AC timing parameters in terms
51
* of the number of cycles. If the calculated number of cycles based on the
52
* absolute time value is less than the min tCK value, min tCK value should
53
* be used instead. This typically happens at low frequencies.
55
static const struct lpddr2_min_tck min_tck_jedec = {
70
static const struct lpddr2_ac_timings const*
71
jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
72
&timings_jedec_532_mhz
75
static const struct lpddr2_device_timings jedec_default_timings = {
76
.ac_timings = jedec_ac_timings,
77
.min_tck = &min_tck_jedec
80
void emif_get_device_timings(u32 emif_nr,
81
const struct lpddr2_device_timings **cs0_device_timings,
82
const struct lpddr2_device_timings **cs1_device_timings)
84
/* Assume Identical devices on EMIF1 & EMIF2 */
85
*cs0_device_timings = &jedec_default_timings;
86
*cs1_device_timings = NULL;
88
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */