5
* This header file contains public constants and structures used by
6
* the scsi code for linux.
10
$Header: /usr/src/linux/include/linux/RCS/scsi.h,v 1.3 1993/09/24 12:20:33 drew Exp $
12
For documentation on the OPCODES, MESSAGES, and SENSE values,
13
please consult the SCSI standard.
21
#define TEST_UNIT_READY 0x00
22
#define REZERO_UNIT 0x01
23
#define REQUEST_SENSE 0x03
24
#define FORMAT_UNIT 0x04
25
#define READ_BLOCK_LIMITS 0x05
26
#define REASSIGN_BLOCKS 0x07
30
#define READ_REVERSE 0x0f
31
#define WRITE_FILEMARKS 0x10
34
#define RECOVER_BUFFERED_DATA 0x14
35
#define MODE_SELECT 0x15
40
#define MODE_SENSE 0x1a
41
#define START_STOP 0x1b
42
#define RECEIVE_DIAGNOSTIC 0x1c
43
#define SEND_DIAGNOSTIC 0x1d
44
#define ALLOW_MEDIUM_REMOVAL 0x1e
46
#define SET_WINDOW 0x24
47
#define READ_CAPACITY 0x25
51
#define WRITE_VERIFY 0x2e
53
#define SEARCH_HIGH 0x30
54
#define SEARCH_EQUAL 0x31
55
#define SEARCH_LOW 0x32
56
#define SET_LIMITS 0x33
57
#define PRE_FETCH 0x34
58
#define READ_POSITION 0x34
59
#define SYNCHRONIZE_CACHE 0x35
60
#define LOCK_UNLOCK_CACHE 0x36
61
#define READ_DEFECT_DATA 0x37
62
#define MEDIUM_SCAN 0x38
64
#define COPY_VERIFY 0x3a
65
#define WRITE_BUFFER 0x3b
66
#define READ_BUFFER 0x3c
67
#define UPDATE_BLOCK 0x3d
68
#define READ_LONG 0x3e
69
#define WRITE_LONG 0x3f
70
#define CHANGE_DEFINITION 0x40
71
#define WRITE_SAME 0x41
73
#define LOG_SELECT 0x4c
74
#define LOG_SENSE 0x4d
75
#define MODE_SELECT_10 0x55
76
#define RESERVE_10 0x56
77
#define RELEASE_10 0x57
78
#define MODE_SENSE_10 0x5a
79
#define PERSISTENT_RESERVE_IN 0x5e
80
#define PERSISTENT_RESERVE_OUT 0x5f
81
#define REPORT_LUNS 0xa0
82
#define MOVE_MEDIUM 0xa5
85
#define WRITE_VERIFY_12 0xae
86
#define SEARCH_HIGH_12 0xb0
87
#define SEARCH_EQUAL_12 0xb1
88
#define SEARCH_LOW_12 0xb2
89
#define READ_ELEMENT_STATUS 0xb8
90
#define SEND_VOLUME_TAG 0xb6
91
#define WRITE_LONG_2 0xea
94
#define VERIFY_16 0x8f
95
#define SERVICE_ACTION_IN 0x9e
96
/* values for service action in */
97
#define SAI_READ_CAPACITY_16 0x10
99
#define SCSI_RETRY_10(c) ((c) == READ_6 || (c) == WRITE_6 || (c) == SEEK_6)
102
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
103
* T10/1561-D Revision 4 Draft dated 7th November 2002.
105
#define SAM_STAT_GOOD 0x00
106
#define SAM_STAT_CHECK_CONDITION 0x02
107
#define SAM_STAT_CONDITION_MET 0x04
108
#define SAM_STAT_BUSY 0x08
109
#define SAM_STAT_INTERMEDIATE 0x10
110
#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
111
#define SAM_STAT_RESERVATION_CONFLICT 0x18
112
#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
113
#define SAM_STAT_TASK_SET_FULL 0x28
114
#define SAM_STAT_ACA_ACTIVE 0x30
115
#define SAM_STAT_TASK_ABORTED 0x40
122
#define CHECK_CONDITION 0x01
123
#define CONDITION_GOOD 0x02
125
#define INTERMEDIATE_GOOD 0x08
126
#define INTERMEDIATE_C_GOOD 0x0a
127
#define RESERVATION_CONFLICT 0x0c
128
#define COMMAND_TERMINATED 0x11
129
#define QUEUE_FULL 0x14
131
#define STATUS_MASK 0x3e
137
#define NO_SENSE 0x00
138
#define RECOVERED_ERROR 0x01
139
#define NOT_READY 0x02
140
#define MEDIUM_ERROR 0x03
141
#define HARDWARE_ERROR 0x04
142
#define ILLEGAL_REQUEST 0x05
143
#define UNIT_ATTENTION 0x06
144
#define DATA_PROTECT 0x07
145
#define BLANK_CHECK 0x08
146
#define COPY_ABORTED 0x0a
147
#define ABORTED_COMMAND 0x0b
148
#define VOLUME_OVERFLOW 0x0d
149
#define MISCOMPARE 0x0e
156
#define TYPE_DISK 0x00
157
#define TYPE_TAPE 0x01
158
#define TYPE_PRINTER 0x02
159
#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
160
#define TYPE_WORM 0x04 /* Treated as ROM by our system */
161
#define TYPE_ROM 0x05
162
#define TYPE_SCANNER 0x06
163
#define TYPE_MOD 0x07 /* Magneto-optical disk -
164
* - treated as TYPE_DISK */
165
#define TYPE_MEDIUM_CHANGER 0x08
166
#define TYPE_COMM 0x09 /* Communications device */
167
#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
168
#define TYPE_NO_LUN 0x7f
171
* standard mode-select header prepended to all mode-select commands
173
* moved here from cdrom.h -- kraxel
176
struct ccs_modesel_head
178
uint8_t _r1; /* reserved */
179
uint8_t medium; /* device-specific medium type */
180
uint8_t _r2; /* reserved */
181
uint8_t block_desc_length; /* block descriptor length */
182
uint8_t density; /* device-specific density code */
183
uint8_t number_blocks_hi; /* number of blocks in this block desc */
184
uint8_t number_blocks_med;
185
uint8_t number_blocks_lo;
187
uint8_t block_length_hi; /* block length for blocks in this desc */
188
uint8_t block_length_med;
189
uint8_t block_length_lo;
196
#define COMMAND_COMPLETE 0x00
197
#define EXTENDED_MESSAGE 0x01
198
#define EXTENDED_MODIFY_DATA_POINTER 0x00
199
#define EXTENDED_SDTR 0x01
200
#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
201
#define EXTENDED_WDTR 0x03
202
#define SAVE_POINTERS 0x02
203
#define RESTORE_POINTERS 0x03
204
#define DISCONNECT 0x04
205
#define INITIATOR_ERROR 0x05
207
#define MESSAGE_REJECT 0x07
209
#define MSG_PARITY_ERROR 0x09
210
#define LINKED_CMD_COMPLETE 0x0a
211
#define LINKED_FLG_CMD_COMPLETE 0x0b
212
#define BUS_DEVICE_RESET 0x0c
214
#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
215
#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
217
#define SIMPLE_QUEUE_TAG 0x20
218
#define HEAD_OF_QUEUE_TAG 0x21
219
#define ORDERED_QUEUE_TAG 0x22
222
* Here are some scsi specific ioctl commands which are sometimes useful.
224
/* These are a few other constants only used by scsi devices */
225
/* Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395 */
227
#define SCSI_IOCTL_GET_IDLUN 0x5382 /* conflicts with CDROMAUDIOBUFSIZ */
229
/* Used to turn on and off tagged queuing for scsi devices */
231
#define SCSI_IOCTL_TAGGED_ENABLE 0x5383
232
#define SCSI_IOCTL_TAGGED_DISABLE 0x5384
234
/* Used to obtain the host number of a device. */
235
#define SCSI_IOCTL_PROBE_HOST 0x5385
237
/* Used to get the bus number for a device */
238
#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
240
/* Used to get the PCI location of a device */
241
#define SCSI_IOCTL_GET_PCI 0x5387
244
* Overrides for Emacs so that we follow Linus's tabbing style.
245
* Emacs will notice this stuff at the end of the file and automatically
246
* adjust the settings for this buffer only. This must remain at the end
248
* ---------------------------------------------------------------------------
251
* c-brace-imaginary-offset: 0
253
* c-argdecl-indent: 4
255
* c-continued-statement-offset: 4
256
* c-continued-brace-offset: 0
257
* indent-tabs-mode: nil