1
What: /sys/class/leds/<led>/brightness
4
Contact: Richard Purdie <rpurdie@rpsys.net>
6
Set the brightness of the LED. Most LEDs don't
7
have hardware brightness support so will just be turned on for
8
non-zero brightness settings. The value is between 0 and
9
/sys/class/leds/<led>/max_brightness.
11
What: /sys/class/leds/<led>/max_brightness
14
Contact: Richard Purdie <rpurdie@rpsys.net>
16
Maximum brightness level for this led, default is 255 (LED_FULL).
18
What: /sys/class/leds/<led>/trigger
21
Contact: Richard Purdie <rpurdie@rpsys.net>
23
Set the trigger for this LED. A trigger is a kernel based source
25
You can change triggers in a similar manner to the way an IO
26
scheduler is chosen. Trigger specific parameters can appear in
27
/sys/class/leds/<led> once a given trigger is selected.
29
What: /sys/class/leds/<led>/inverted
32
Contact: Richard Purdie <rpurdie@rpsys.net>
34
Invert the LED on/off state. This parameter is specific to
35
gpio and backlight triggers. In case of the backlight trigger,
36
it is useful when driving a LED which is intended to indicate
37
a device in a standby like state.