1
/*******************************************************************************
2
STMMAC Ethernet Driver -- MDIO bus implementation
3
Provides Bus interface for MII registers
5
Copyright (C) 2007-2009 STMicroelectronics Ltd
7
This program is free software; you can redistribute it and/or modify it
8
under the terms and conditions of the GNU General Public License,
9
version 2, as published by the Free Software Foundation.
11
This program is distributed in the hope it will be useful, but WITHOUT
12
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16
You should have received a copy of the GNU General Public License along with
17
this program; if not, write to the Free Software Foundation, Inc.,
18
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
20
The full GNU General Public License is included in this distribution in
21
the file called "COPYING".
23
Author: Carl Shaw <carl.shaw@st.com>
24
Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
25
*******************************************************************************/
27
#include <linux/mii.h>
28
#include <linux/phy.h>
29
#include <linux/slab.h>
34
#define MII_BUSY 0x00000001
35
#define MII_WRITE 0x00000002
39
* @bus: points to the mii_bus structure
40
* @phyaddr: MII addr reg bits 15-11
41
* @phyreg: MII addr reg bits 10-6
42
* Description: it reads data from the MII register from within the phy device.
43
* For the 7111 GMAC, we must set the bit 0 in the MII address register while
44
* accessing the PHY registers.
45
* Fortunately, it seems this has no drawback for the 7109 MAC.
47
static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
49
struct net_device *ndev = bus->priv;
50
struct stmmac_priv *priv = netdev_priv(ndev);
51
unsigned int mii_address = priv->hw->mii.addr;
52
unsigned int mii_data = priv->hw->mii.data;
55
u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
56
((phyreg << 6) & (0x000007C0)));
57
regValue |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
59
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
60
writel(regValue, priv->ioaddr + mii_address);
61
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
63
/* Read the data from the MII data register */
64
data = (int)readl(priv->ioaddr + mii_data);
71
* @bus: points to the mii_bus structure
72
* @phyaddr: MII addr reg bits 15-11
73
* @phyreg: MII addr reg bits 10-6
75
* Description: it writes the data into the MII register from within the device.
77
static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
80
struct net_device *ndev = bus->priv;
81
struct stmmac_priv *priv = netdev_priv(ndev);
82
unsigned int mii_address = priv->hw->mii.addr;
83
unsigned int mii_data = priv->hw->mii.data;
86
(((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
89
value |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
92
/* Wait until any existing MII operation is complete */
93
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
95
/* Set the MII address register to write */
96
writel(phydata, priv->ioaddr + mii_data);
97
writel(value, priv->ioaddr + mii_address);
99
/* Wait until any existing MII operation is complete */
100
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
107
* @bus: points to the mii_bus structure
108
* Description: reset the MII bus
110
static int stmmac_mdio_reset(struct mii_bus *bus)
112
struct net_device *ndev = bus->priv;
113
struct stmmac_priv *priv = netdev_priv(ndev);
114
unsigned int mii_address = priv->hw->mii.addr;
116
if (priv->plat->mdio_bus_data->phy_reset) {
117
pr_debug("stmmac_mdio_reset: calling phy_reset\n");
118
priv->plat->mdio_bus_data->phy_reset(priv->plat->bsp_priv);
121
/* This is a workaround for problems with the STE101P PHY.
122
* It doesn't complete its reset until at least one clock cycle
123
* on MDC, so perform a dummy mdio read.
125
writel(0, priv->ioaddr + mii_address);
131
* stmmac_mdio_register
132
* @ndev: net device structure
133
* Description: it registers the MII bus
135
int stmmac_mdio_register(struct net_device *ndev)
138
struct mii_bus *new_bus;
140
struct stmmac_priv *priv = netdev_priv(ndev);
141
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
147
new_bus = mdiobus_alloc();
151
if (mdio_bus_data->irqs)
152
irqlist = mdio_bus_data->irqs;
154
irqlist = priv->mii_irq;
156
new_bus->name = "STMMAC MII Bus";
157
new_bus->read = &stmmac_mdio_read;
158
new_bus->write = &stmmac_mdio_write;
159
new_bus->reset = &stmmac_mdio_reset;
160
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", mdio_bus_data->bus_id);
161
new_bus->priv = ndev;
162
new_bus->irq = irqlist;
163
new_bus->phy_mask = mdio_bus_data->phy_mask;
164
new_bus->parent = priv->device;
165
err = mdiobus_register(new_bus);
167
pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
168
goto bus_register_fail;
174
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
175
struct phy_device *phydev = new_bus->phy_map[addr];
182
* If an IRQ was provided to be assigned after
183
* the bus probe, do it here.
185
if ((mdio_bus_data->irqs == NULL) &&
186
(mdio_bus_data->probed_phy_irq > 0)) {
187
irqlist[addr] = mdio_bus_data->probed_phy_irq;
188
phydev->irq = mdio_bus_data->probed_phy_irq;
192
* If we're going to bind the MAC to this PHY bus,
193
* and no PHY number was provided to the MAC,
194
* use the one probed here.
196
if ((priv->plat->bus_id == mdio_bus_data->bus_id) &&
197
(priv->plat->phy_addr == -1))
198
priv->plat->phy_addr = addr;
200
act = (priv->plat->bus_id == mdio_bus_data->bus_id) &&
201
(priv->plat->phy_addr == addr);
202
switch (phydev->irq) {
206
case PHY_IGNORE_INTERRUPT:
210
sprintf(irq_num, "%d", phydev->irq);
214
pr_info("%s: PHY ID %08x at %d IRQ %s (%s)%s\n",
215
ndev->name, phydev->phy_id, addr,
216
irq_str, dev_name(&phydev->dev),
217
act ? " active" : "");
223
pr_warning("%s: No PHY found\n", ndev->name);
228
mdiobus_free(new_bus);
233
* stmmac_mdio_unregister
234
* @ndev: net device structure
235
* Description: it unregisters the MII bus
237
int stmmac_mdio_unregister(struct net_device *ndev)
239
struct stmmac_priv *priv = netdev_priv(ndev);
241
mdiobus_unregister(priv->mii);
242
priv->mii->priv = NULL;
243
mdiobus_free(priv->mii);