2
* arch/m68k/q40/q40ints.c
4
* Copyright (C) 1999,2001 Richard Zidlicky
6
* This file is subject to the terms and conditions of the GNU General Public
7
* License. See the file COPYING in the main directory of this archive
10
* .. used to be loosely based on bvme6000ints.c
14
#include <linux/types.h>
15
#include <linux/kernel.h>
16
#include <linux/errno.h>
17
#include <linux/interrupt.h>
18
#include <linux/irq.h>
20
#include <asm/ptrace.h>
21
#include <asm/system.h>
22
#include <asm/traps.h>
24
#include <asm/q40_master.h>
25
#include <asm/q40ints.h>
28
* Q40 IRQs are defined as follows:
29
* 3,4,5,6,7,10,11,14,15 : ISA dev IRQs
32
* 33 : frame int (50/200 Hz periodic timer)
33
* 34 : sample int (10/20 KHz periodic timer)
37
static void q40_irq_handler(unsigned int, struct pt_regs *fp);
38
static void q40_irq_enable(struct irq_data *data);
39
static void q40_irq_disable(struct irq_data *data);
41
unsigned short q40_ablecount[35];
42
unsigned short q40_state[35];
44
static unsigned int q40_irq_startup(struct irq_data *data)
46
unsigned int irq = data->irq;
48
/* test for ISA ints not implemented by HW */
50
case 1: case 2: case 8: case 9:
51
case 11: case 12: case 13:
52
printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq);
53
/* FIXME return -ENXIO; */
58
static void q40_irq_shutdown(struct irq_data *data)
62
static struct irq_chip q40_irq_chip = {
64
.irq_startup = q40_irq_startup,
65
.irq_shutdown = q40_irq_shutdown,
66
.irq_enable = q40_irq_enable,
67
.irq_disable = q40_irq_disable,
71
* void q40_init_IRQ (void)
77
* This function is called during kernel startup to initialize
78
* the q40 IRQ handling routines.
83
void __init q40_init_IRQ(void)
85
m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1,
88
/* setup handler for ISA ints */
89
m68k_setup_auto_interrupt(q40_irq_handler);
91
m68k_irq_startup_irq(IRQ_AUTO_2);
92
m68k_irq_startup_irq(IRQ_AUTO_4);
94
/* now enable some ints.. */
95
master_outb(1, EXT_ENABLE_REG); /* ISA IRQ 5-15 */
97
/* make sure keyboard IRQ is disabled */
98
master_outb(0, KEY_IRQ_ENABLE_REG);
103
* this stuff doesn't really belong here..
106
int ql_ticks; /* 200Hz ticks since last jiffie */
107
static int sound_ticks;
111
void q40_mksound(unsigned int hz, unsigned int ticks)
113
/* for now ignore hz, except that hz==0 switches off sound */
114
/* simply alternate the ampl (128-SVOL)-(128+SVOL)-..-.. at 200Hz */
124
/* sound itself is done in q40_timer_int */
125
if (sound_ticks == 0)
126
sound_ticks = 1000; /* pretty long beep */
127
sound_ticks = ticks << 1;
130
static irq_handler_t q40_timer_routine;
132
static irqreturn_t q40_timer_int (int irq, void * dev)
134
ql_ticks = ql_ticks ? 0 : 1;
136
unsigned char sval=(sound_ticks & 1) ? 128-SVOL : 128+SVOL;
143
q40_timer_routine(irq, dev);
147
void q40_sched_init (irq_handler_t timer_routine)
151
q40_timer_routine = timer_routine;
152
timer_irq = Q40_IRQ_FRAME;
154
if (request_irq(timer_irq, q40_timer_int, 0,
155
"timer", q40_timer_int))
156
panic("Couldn't register timer int");
158
master_outb(-1, FRAME_CLEAR_REG);
159
master_outb( 1, FRAME_RATE_REG);
164
* tables to translate bits into IRQ numbers
165
* it is a good idea to order the entries by priority
169
struct IRQ_TABLE{ unsigned mask; int irq ;};
171
static struct IRQ_TABLE iirqs[]={
172
{Q40_IRQ_FRAME_MASK,Q40_IRQ_FRAME},
173
{Q40_IRQ_KEYB_MASK,Q40_IRQ_KEYBOARD},
176
static struct IRQ_TABLE eirqs[] = {
177
{ .mask = Q40_IRQ3_MASK, .irq = 3 }, /* ser 1 */
178
{ .mask = Q40_IRQ4_MASK, .irq = 4 }, /* ser 2 */
179
{ .mask = Q40_IRQ14_MASK, .irq = 14 }, /* IDE 1 */
180
{ .mask = Q40_IRQ15_MASK, .irq = 15 }, /* IDE 2 */
181
{ .mask = Q40_IRQ6_MASK, .irq = 6 }, /* floppy, handled elsewhere */
182
{ .mask = Q40_IRQ7_MASK, .irq = 7 }, /* par */
183
{ .mask = Q40_IRQ5_MASK, .irq = 5 },
184
{ .mask = Q40_IRQ10_MASK, .irq = 10 },
188
/* complain only this many times about spurious ints : */
189
static int ccleirq=60; /* ISA dev IRQs*/
190
/*static int cclirq=60;*/ /* internal */
192
/* FIXME: add shared ints,mask,unmask,probing.... */
194
#define IRQ_INPROGRESS 1
195
/*static unsigned short saved_mask;*/
196
//static int do_tint=0;
199
/*#define IP_USE_DISABLE *//* would be nice, but crashes ???? */
201
static int mext_disabled=0; /* ext irq disabled by master chip? */
202
static int aliased_irq=0; /* how many times inside handler ?*/
205
/* got interrupt, dispatch to ISA or keyboard/timer IRQs */
206
static void q40_irq_handler(unsigned int irq, struct pt_regs *fp)
212
mir = master_inb(IIRQ_REG);
213
#ifdef CONFIG_BLK_DEV_FD
214
if ((mir & Q40_IRQ_EXT_MASK) &&
215
(master_inb(EIRQ_REG) & Q40_IRQ6_MASK)) {
223
do_IRQ(Q40_IRQ_SAMPLE, fp);
226
if (mir & Q40_IRQ_FRAME_MASK) {
227
do_IRQ(Q40_IRQ_FRAME, fp);
228
master_outb(-1, FRAME_CLEAR_REG);
230
if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) {
231
mer = master_inb(EIRQ_REG);
232
for (i = 0; eirqs[i].mask; i++) {
233
if (mer & eirqs[i].mask) {
236
* There is a little mess wrt which IRQ really caused this irq request. The
237
* main problem is that IIRQ_REG and EIRQ_REG reflect the state when they
238
* are read - which is long after the request came in. In theory IRQs should
239
* not just go away but they occasionally do
241
if (irq > 4 && irq <= 15 && mext_disabled) {
245
if (q40_state[irq] & IRQ_INPROGRESS) {
246
/* some handlers do local_irq_enable() for irq latency reasons, */
247
/* however reentering an active irq handler is not permitted */
248
#ifdef IP_USE_DISABLE
249
/* in theory this is the better way to do it because it still */
250
/* lets through eg the serial irqs, unfortunately it crashes */
254
/*printk("IRQ_INPROGRESS detected for irq %d, disabling - %s disabled\n",
255
irq, disabled ? "already" : "not yet"); */
256
fp->sr = (((fp->sr) & (~0x700))+0x200);
261
q40_state[irq] |= IRQ_INPROGRESS;
263
q40_state[irq] &= ~IRQ_INPROGRESS;
265
/* naively enable everything, if that fails than */
266
/* this function will be reentered immediately thus */
267
/* getting another chance to disable the IRQ */
270
#ifdef IP_USE_DISABLE
277
/*printk("reenabling irq %d\n", irq); */
280
// used to do 'goto repeat;' here, this delayed bh processing too long
284
if (mer && ccleirq > 0 && !aliased_irq) {
285
printk("ISA interrupt from unknown source? EIRQ_REG = %x\n",mer);
290
mir = master_inb(IIRQ_REG);
291
/* should test whether keyboard irq is really enabled, doing it in defhand */
292
if (mir & Q40_IRQ_KEYB_MASK)
293
do_IRQ(Q40_IRQ_KEYBOARD, fp);
298
void q40_irq_enable(struct irq_data *data)
300
unsigned int irq = data->irq;
302
if (irq >= 5 && irq <= 15) {
304
if (mext_disabled > 0)
305
printk("q40_irq_enable : nested disable/enable\n");
306
if (mext_disabled == 0)
307
master_outb(1, EXT_ENABLE_REG);
312
void q40_irq_disable(struct irq_data *data)
314
unsigned int irq = data->irq;
316
/* disable ISA iqs : only do something if the driver has been
317
* verified to be Q40 "compatible" - right now IDE, NE2K
318
* Any driver should not attempt to sleep across disable_irq !!
321
if (irq >= 5 && irq <= 15) {
322
master_outb(0, EXT_ENABLE_REG);
324
if (mext_disabled > 1)
325
printk("disable_irq nesting count %d\n",mext_disabled);