2
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
4
* Sun3 DMA additions by Sam Creasey (sammy@sammy.net)
6
* Adapted from mac_scsinew.h:
9
* Cumana Generic NCR5380 driver defines
11
* Copyright 1993, Drew Eckhardt
13
* (Unix and Linux consulting and custom programming)
19
* For more information, please consult
22
* SCSI Protocol Controller
25
* NCR Microelectronics
26
* 1635 Aeroplaza Drive
27
* Colorado Springs, CO 80916
33
* $Log: cumana_NCR5380.h,v $
36
#ifndef SUN3_NCR5380_H
37
#define SUN3_NCR5380_H
39
#define SUN3SCSI_PUBLIC_RELEASE 1
42
* Int: level 2 autovector
43
* IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
45
#define IRQ_SUN3_SCSI 2
46
#define IOBASE_SUN3_SCSI 0x00140000
48
#define IOBASE_SUN3_VMESCSI 0xff200000
50
static int sun3scsi_abort(struct scsi_cmnd *);
51
static int sun3scsi_detect (struct scsi_host_template *);
52
static const char *sun3scsi_info (struct Scsi_Host *);
53
static int sun3scsi_bus_reset(struct scsi_cmnd *);
54
static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
55
static int sun3scsi_release (struct Scsi_Host *);
66
#define SG_TABLESIZE SG_NONE
73
#ifndef USE_TAGGED_QUEUING
74
#define USE_TAGGED_QUEUING 1
77
#include <scsi/scsicam.h>
80
#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
82
#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
87
#define NCR5380_implementation_fields \
90
#define NCR5380_local_declare() \
91
struct Scsi_Host *_instance
93
#define NCR5380_setup(instance) \
96
#define NCR5380_read(reg) sun3scsi_read(reg)
97
#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
99
#define NCR5380_intr sun3scsi_intr
100
#define NCR5380_queue_command sun3scsi_queue_command
101
#define NCR5380_bus_reset sun3scsi_bus_reset
102
#define NCR5380_abort sun3scsi_abort
103
#define NCR5380_proc_info sun3scsi_proc_info
104
#define NCR5380_dma_xfer_len(i, cmd, phase) \
105
sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
107
#define NCR5380_dma_write_setup(instance, data, count) sun3scsi_dma_setup(data, count, 1)
108
#define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data, count, 0)
109
#define NCR5380_dma_residual sun3scsi_dma_residual
111
#define BOARD_NORMAL 0
112
#define BOARD_NCR53C400 1
114
/* additional registers - mainly DMA control regs */
115
/* these start at regbase + 8 -- directly after the NCR regs */
116
struct sun3_dma_regs {
117
unsigned short dma_addr_hi; /* vme only */
118
unsigned short dma_addr_lo; /* vme only */
119
unsigned short dma_count_hi; /* vme only */
120
unsigned short dma_count_lo; /* vme only */
121
unsigned short udc_data; /* udc dma data reg (obio only) */
122
unsigned short udc_addr; /* uda dma addr reg (obio only) */
123
unsigned short fifo_data; /* fifo data reg, holds extra byte on
125
unsigned short fifo_count;
126
unsigned short csr; /* control/status reg */
127
unsigned short bpack_hi; /* vme only */
128
unsigned short bpack_lo; /* vme only */
129
unsigned short ivect; /* vme only */
130
unsigned short fifo_count_hi; /* vme only */
133
/* ucd chip specific regs - live in dvma space */
134
struct sun3_udc_regs {
135
unsigned short rsel; /* select regs to load */
136
unsigned short addr_hi; /* high word of addr */
137
unsigned short addr_lo; /* low word */
138
unsigned short count; /* words to be xfer'd */
139
unsigned short mode_hi; /* high word of channel mode */
140
unsigned short mode_lo; /* low word of channel mode */
143
/* addresses of the udc registers */
144
#define UDC_MODE 0x38
145
#define UDC_CSR 0x2e /* command/status */
146
#define UDC_CHN_HI 0x26 /* chain high word */
147
#define UDC_CHN_LO 0x22 /* chain lo word */
148
#define UDC_CURA_HI 0x1a /* cur reg A high */
149
#define UDC_CURA_LO 0x0a /* cur reg A low */
150
#define UDC_CURB_HI 0x12 /* cur reg B high */
151
#define UDC_CURB_LO 0x02 /* cur reg B low */
152
#define UDC_MODE_HI 0x56 /* mode reg high */
153
#define UDC_MODE_LO 0x52 /* mode reg low */
154
#define UDC_COUNT 0x32 /* words to xfer */
156
/* some udc commands */
158
#define UDC_CHN_START 0xa0 /* start chain */
159
#define UDC_INT_ENABLE 0x32 /* channel 1 int on */
162
#define UDC_MODE_HIWORD 0x40
163
#define UDC_MODE_LSEND 0xc2
164
#define UDC_MODE_LRECV 0xd2
166
/* udc reg selections */
167
#define UDC_RSEL_SEND 0x282
168
#define UDC_RSEL_RECV 0x182
170
/* bits in csr reg */
171
#define CSR_DMA_ACTIVE 0x8000
172
#define CSR_DMA_CONFLICT 0x4000
173
#define CSR_DMA_BUSERR 0x2000
175
#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
176
#define CSR_SDB_INT 0x200 /* sbc interrupt pending */
177
#define CSR_DMA_INT 0x100 /* dma interrupt pending */
179
#define CSR_LEFT 0xc0
180
#define CSR_LEFT_3 0xc0
181
#define CSR_LEFT_2 0x80
182
#define CSR_LEFT_1 0x40
183
#define CSR_PACK_ENABLE 0x20
185
#define CSR_DMA_ENABLE 0x10
187
#define CSR_SEND 0x8 /* 1 = send 0 = recv */
188
#define CSR_FIFO 0x2 /* reset fifo */
189
#define CSR_INTR 0x4 /* interrupt enable */
192
#define VME_DATA24 0x3d00
194
// debugging printk's, taken from atari_scsi.h
195
/* Debugging printk definitions:
200
* HSH -> PIO handshake
201
* INF -> information transfer
202
* INI -> initialization
204
* LNK -> linked commands
205
* MAIN -> NCR5380_main() control flow
206
* NDAT -> no data-out phase
207
* NWR -> no write commands
208
* PIO -> PIO transfers
209
* PDMA -> pseudo DMA (unused on Atari)
211
* RSL -> reselections
213
* USL -> usleep cpde (unused on Atari)
214
* LBS -> last byte sent (unused on Atari)
215
* RSS -> restarting of selections
216
* EXT -> extended messages
217
* ABRT -> aborting and resetting
218
* TAG -> queue tag handling
219
* MER -> merging of consec. buffers
225
#if NDEBUG & NDEBUG_ARBITRATION
226
#define ARB_PRINTK(format, args...) \
227
printk(KERN_DEBUG format , ## args)
229
#define ARB_PRINTK(format, args...)
231
#if NDEBUG & NDEBUG_AUTOSENSE
232
#define ASEN_PRINTK(format, args...) \
233
printk(KERN_DEBUG format , ## args)
235
#define ASEN_PRINTK(format, args...)
237
#if NDEBUG & NDEBUG_DMA
238
#define DMA_PRINTK(format, args...) \
239
printk(KERN_DEBUG format , ## args)
241
#define DMA_PRINTK(format, args...)
243
#if NDEBUG & NDEBUG_HANDSHAKE
244
#define HSH_PRINTK(format, args...) \
245
printk(KERN_DEBUG format , ## args)
247
#define HSH_PRINTK(format, args...)
249
#if NDEBUG & NDEBUG_INFORMATION
250
#define INF_PRINTK(format, args...) \
251
printk(KERN_DEBUG format , ## args)
253
#define INF_PRINTK(format, args...)
255
#if NDEBUG & NDEBUG_INIT
256
#define INI_PRINTK(format, args...) \
257
printk(KERN_DEBUG format , ## args)
259
#define INI_PRINTK(format, args...)
261
#if NDEBUG & NDEBUG_INTR
262
#define INT_PRINTK(format, args...) \
263
printk(KERN_DEBUG format , ## args)
265
#define INT_PRINTK(format, args...)
267
#if NDEBUG & NDEBUG_LINKED
268
#define LNK_PRINTK(format, args...) \
269
printk(KERN_DEBUG format , ## args)
271
#define LNK_PRINTK(format, args...)
273
#if NDEBUG & NDEBUG_MAIN
274
#define MAIN_PRINTK(format, args...) \
275
printk(KERN_DEBUG format , ## args)
277
#define MAIN_PRINTK(format, args...)
279
#if NDEBUG & NDEBUG_NO_DATAOUT
280
#define NDAT_PRINTK(format, args...) \
281
printk(KERN_DEBUG format , ## args)
283
#define NDAT_PRINTK(format, args...)
285
#if NDEBUG & NDEBUG_NO_WRITE
286
#define NWR_PRINTK(format, args...) \
287
printk(KERN_DEBUG format , ## args)
289
#define NWR_PRINTK(format, args...)
291
#if NDEBUG & NDEBUG_PIO
292
#define PIO_PRINTK(format, args...) \
293
printk(KERN_DEBUG format , ## args)
295
#define PIO_PRINTK(format, args...)
297
#if NDEBUG & NDEBUG_PSEUDO_DMA
298
#define PDMA_PRINTK(format, args...) \
299
printk(KERN_DEBUG format , ## args)
301
#define PDMA_PRINTK(format, args...)
303
#if NDEBUG & NDEBUG_QUEUES
304
#define QU_PRINTK(format, args...) \
305
printk(KERN_DEBUG format , ## args)
307
#define QU_PRINTK(format, args...)
309
#if NDEBUG & NDEBUG_RESELECTION
310
#define RSL_PRINTK(format, args...) \
311
printk(KERN_DEBUG format , ## args)
313
#define RSL_PRINTK(format, args...)
315
#if NDEBUG & NDEBUG_SELECTION
316
#define SEL_PRINTK(format, args...) \
317
printk(KERN_DEBUG format , ## args)
319
#define SEL_PRINTK(format, args...)
321
#if NDEBUG & NDEBUG_USLEEP
322
#define USL_PRINTK(format, args...) \
323
printk(KERN_DEBUG format , ## args)
325
#define USL_PRINTK(format, args...)
327
#if NDEBUG & NDEBUG_LAST_BYTE_SENT
328
#define LBS_PRINTK(format, args...) \
329
printk(KERN_DEBUG format , ## args)
331
#define LBS_PRINTK(format, args...)
333
#if NDEBUG & NDEBUG_RESTART_SELECT
334
#define RSS_PRINTK(format, args...) \
335
printk(KERN_DEBUG format , ## args)
337
#define RSS_PRINTK(format, args...)
339
#if NDEBUG & NDEBUG_EXTENDED
340
#define EXT_PRINTK(format, args...) \
341
printk(KERN_DEBUG format , ## args)
343
#define EXT_PRINTK(format, args...)
345
#if NDEBUG & NDEBUG_ABORT
346
#define ABRT_PRINTK(format, args...) \
347
printk(KERN_DEBUG format , ## args)
349
#define ABRT_PRINTK(format, args...)
351
#if NDEBUG & NDEBUG_TAGS
352
#define TAG_PRINTK(format, args...) \
353
printk(KERN_DEBUG format , ## args)
355
#define TAG_PRINTK(format, args...)
357
#if NDEBUG & NDEBUG_MERGING
358
#define MER_PRINTK(format, args...) \
359
printk(KERN_DEBUG format , ## args)
361
#define MER_PRINTK(format, args...)
364
/* conditional macros for NCR5380_print_{,phase,status} */
366
#define NCR_PRINT(mask) \
367
((NDEBUG & (mask)) ? NCR5380_print(instance) : (void)0)
369
#define NCR_PRINT_PHASE(mask) \
370
((NDEBUG & (mask)) ? NCR5380_print_phase(instance) : (void)0)
372
#define NCR_PRINT_STATUS(mask) \
373
((NDEBUG & (mask)) ? NCR5380_print_status(instance) : (void)0)
377
#endif /* ndef HOSTS_C */
378
#endif /* SUN3_NCR5380_H */