1
/* envctrl.c: Temperature and Fan monitoring on Machines providing it.
3
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
4
* Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com)
5
* VT - The implementation is to support Sun Microelectronics (SME) platform
6
* environment monitoring. SME platforms use pcf8584 as the i2c bus
7
* controller to access pcf8591 (8-bit A/D and D/A converter) and
8
* pcf8571 (256 x 8-bit static low-voltage RAM with I2C-bus interface).
9
* At board level, it follows SME Firmware I2C Specification. Reference:
10
* http://www-eu2.semiconductors.com/pip/PCF8584P
11
* http://www-eu2.semiconductors.com/pip/PCF8574AP
12
* http://www-eu2.semiconductors.com/pip/PCF8591P
14
* EB - Added support for CP1500 Global Address and PS/Voltage monitoring.
15
* Eric Brower <ebrower@usa.net>
17
* DB - Audit every copy_to_user in envctrl_read.
18
* Daniele Bellucci <bellucda@tiscali.it>
21
#include <linux/module.h>
22
#include <linux/init.h>
23
#include <linux/kthread.h>
24
#include <linux/delay.h>
25
#include <linux/ioport.h>
26
#include <linux/miscdevice.h>
27
#include <linux/kmod.h>
28
#include <linux/reboot.h>
29
#include <linux/slab.h>
31
#include <linux/of_device.h>
33
#include <asm/uaccess.h>
34
#include <asm/envctrl.h>
37
#define DRIVER_NAME "envctrl"
38
#define PFX DRIVER_NAME ": "
40
#define ENVCTRL_MINOR 162
42
#define PCF8584_ADDRESS 0x55
44
#define CONTROL_PIN 0x80
45
#define CONTROL_ES0 0x40
46
#define CONTROL_ES1 0x20
47
#define CONTROL_ES2 0x10
48
#define CONTROL_ENI 0x08
49
#define CONTROL_STA 0x04
50
#define CONTROL_STO 0x02
51
#define CONTROL_ACK 0x01
53
#define STATUS_PIN 0x80
54
#define STATUS_STS 0x20
55
#define STATUS_BER 0x10
56
#define STATUS_LRB 0x08
57
#define STATUS_AD0 0x08
58
#define STATUS_AAB 0x04
59
#define STATUS_LAB 0x02
60
#define STATUS_BB 0x01
65
#define BUS_CLK_90 0x00
66
#define BUS_CLK_45 0x01
67
#define BUS_CLK_11 0x02
68
#define BUS_CLK_1_5 0x03
76
#define OBD_SEND_START 0xc5 /* value to generate I2c_bus START condition */
77
#define OBD_SEND_STOP 0xc3 /* value to generate I2c_bus STOP condition */
79
/* Monitor type of i2c child device.
80
* Firmware definitions.
82
#define PCF8584_MAX_CHANNELS 8
83
#define PCF8584_GLOBALADDR_TYPE 6 /* global address monitor */
84
#define PCF8584_FANSTAT_TYPE 3 /* fan status monitor */
85
#define PCF8584_VOLTAGE_TYPE 2 /* voltage monitor */
86
#define PCF8584_TEMP_TYPE 1 /* temperature monitor*/
88
/* Monitor type of i2c child device.
91
#define ENVCTRL_NOMON 0
92
#define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */
93
#define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */
94
#define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */
95
#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */
97
#define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */
98
#define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */
99
#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */
100
#define ENVCTRL_GLOBALADDR_MON 8 /* global address */
102
/* Child device type.
103
* Driver definitions.
105
#define I2C_ADC 0 /* pcf8591 */
106
#define I2C_GPIO 1 /* pcf8571 */
108
/* Data read from child device may need to decode
109
* through a data table and a scale.
110
* Translation type as defined by firmware.
112
#define ENVCTRL_TRANSLATE_NO 0
113
#define ENVCTRL_TRANSLATE_PARTIAL 1
114
#define ENVCTRL_TRANSLATE_COMBINED 2
115
#define ENVCTRL_TRANSLATE_FULL 3 /* table[data] */
116
#define ENVCTRL_TRANSLATE_SCALE 4 /* table[data]/scale */
118
/* Driver miscellaneous definitions. */
119
#define ENVCTRL_MAX_CPU 4
120
#define CHANNEL_DESC_SZ 256
122
/* Mask values for combined GlobalAddress/PowerStatus node */
123
#define ENVCTRL_GLOBALADDR_ADDR_MASK 0x1F
124
#define ENVCTRL_GLOBALADDR_PSTAT_MASK 0x60
126
/* Node 0x70 ignored on CompactPCI CP1400/1500 platforms
127
* (see envctrl_init_i2c_child)
129
#define ENVCTRL_CPCI_IGNORED_NODE 0x70
131
#define PCF8584_DATA 0x00
132
#define PCF8584_CSR 0x01
134
/* Each child device can be monitored by up to PCF8584_MAX_CHANNELS.
135
* Property of a port or channel as defined by the firmware.
137
struct pcf8584_channel {
138
unsigned char chnl_no;
139
unsigned char io_direction;
144
/* Each child device may have one or more tables of bytes to help decode
145
* data. Table property as defined by the firmware.
147
struct pcf8584_tblprop {
150
unsigned int offset; /* offset from the beginning of the table */
156
/* Either ADC or GPIO. */
157
unsigned char i2ctype;
159
struct pcf8584_channel chnl_array[PCF8584_MAX_CHANNELS];
162
unsigned int total_chnls; /* Number of monitor channels. */
163
unsigned char fan_mask; /* Byte mask for fan status channels. */
164
unsigned char voltage_mask; /* Byte mask for voltage status channels. */
165
struct pcf8584_tblprop tblprop_array[PCF8584_MAX_CHANNELS];
167
/* Properties of all monitor channels. */
168
unsigned int total_tbls; /* Number of monitor tables. */
169
char *tables; /* Pointer to table(s). */
170
char chnls_desc[CHANNEL_DESC_SZ]; /* Channel description. */
171
char mon_type[PCF8584_MAX_CHANNELS];
174
static void __iomem *i2c;
175
static struct i2c_child_t i2c_childlist[ENVCTRL_MAX_CPU*2];
176
static unsigned char chnls_mask[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
177
static unsigned int warning_temperature = 0;
178
static unsigned int shutdown_temperature = 0;
179
static char read_cpu;
181
/* Forward declarations. */
182
static struct i2c_child_t *envctrl_get_i2c_child(unsigned char);
184
/* Function Description: Test the PIN bit (Pending Interrupt Not)
185
* to test when serial transmission is completed .
188
static void envtrl_i2c_test_pin(void)
192
while (--limit > 0) {
193
if (!(readb(i2c + PCF8584_CSR) & STATUS_PIN))
199
printk(KERN_INFO PFX "Pin status will not clear.\n");
202
/* Function Description: Test busy bit.
205
static void envctrl_i2c_test_bb(void)
209
while (--limit > 0) {
210
/* Busy bit 0 means busy. */
211
if (readb(i2c + PCF8584_CSR) & STATUS_BB)
217
printk(KERN_INFO PFX "Busy bit will not clear.\n");
220
/* Function Description: Send the address for a read access.
221
* Return : 0 if not acknowledged, otherwise acknowledged.
223
static int envctrl_i2c_read_addr(unsigned char addr)
225
envctrl_i2c_test_bb();
228
writeb(addr + 1, i2c + PCF8584_DATA);
230
envctrl_i2c_test_bb();
232
writeb(OBD_SEND_START, i2c + PCF8584_CSR);
235
envtrl_i2c_test_pin();
237
/* CSR 0 means acknowledged. */
238
if (!(readb(i2c + PCF8584_CSR) & STATUS_LRB)) {
239
return readb(i2c + PCF8584_DATA);
241
writeb(OBD_SEND_STOP, i2c + PCF8584_CSR);
246
/* Function Description: Send the address for write mode.
249
static void envctrl_i2c_write_addr(unsigned char addr)
251
envctrl_i2c_test_bb();
252
writeb(addr, i2c + PCF8584_DATA);
254
/* Generate Start condition. */
255
writeb(OBD_SEND_START, i2c + PCF8584_CSR);
258
/* Function Description: Read 1 byte of data from addr
259
* set by envctrl_i2c_read_addr()
260
* Return : Data from address set by envctrl_i2c_read_addr().
262
static unsigned char envctrl_i2c_read_data(void)
264
envtrl_i2c_test_pin();
265
writeb(CONTROL_ES0, i2c + PCF8584_CSR); /* Send neg ack. */
266
return readb(i2c + PCF8584_DATA);
269
/* Function Description: Instruct the device which port to read data from.
272
static void envctrl_i2c_write_data(unsigned char port)
274
envtrl_i2c_test_pin();
275
writeb(port, i2c + PCF8584_DATA);
278
/* Function Description: Generate Stop condition after last byte is sent.
281
static void envctrl_i2c_stop(void)
283
envtrl_i2c_test_pin();
284
writeb(OBD_SEND_STOP, i2c + PCF8584_CSR);
287
/* Function Description: Read adc device.
288
* Return : Data at address and port.
290
static unsigned char envctrl_i2c_read_8591(unsigned char addr, unsigned char port)
293
envctrl_i2c_write_addr(addr);
295
/* Setup port to read. */
296
envctrl_i2c_write_data(port);
300
envctrl_i2c_read_addr(addr);
302
/* Do a single byte read and send stop. */
303
envctrl_i2c_read_data();
306
return readb(i2c + PCF8584_DATA);
309
/* Function Description: Read gpio device.
310
* Return : Data at address.
312
static unsigned char envctrl_i2c_read_8574(unsigned char addr)
316
envctrl_i2c_read_addr(addr);
318
/* Do a single byte read and send stop. */
319
rd = envctrl_i2c_read_data();
324
/* Function Description: Decode data read from an adc device using firmware
326
* Return: Number of read bytes. Data is stored in bufdata in ascii format.
328
static int envctrl_i2c_data_translate(unsigned char data, int translate_type,
329
int scale, char *tbl, char *bufdata)
333
switch (translate_type) {
334
case ENVCTRL_TRANSLATE_NO:
335
/* No decode necessary. */
340
case ENVCTRL_TRANSLATE_FULL:
341
/* Decode this way: data = table[data]. */
343
bufdata[0] = tbl[data];
346
case ENVCTRL_TRANSLATE_SCALE:
347
/* Decode this way: data = table[data]/scale */
348
sprintf(bufdata,"%d ", (tbl[data] * 10) / (scale));
349
len = strlen(bufdata);
350
bufdata[len - 1] = bufdata[len - 2];
351
bufdata[len - 2] = '.';
361
/* Function Description: Read cpu-related data such as cpu temperature, voltage.
362
* Return: Number of read bytes. Data is stored in bufdata in ascii format.
364
static int envctrl_read_cpu_info(int cpu, struct i2c_child_t *pchild,
365
char mon_type, unsigned char *bufdata)
371
/* Find the right monitor type and channel. */
372
for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
373
if (pchild->mon_type[i] == mon_type) {
383
/* Read data from address and port. */
384
data = envctrl_i2c_read_8591((unsigned char)pchild->addr,
385
(unsigned char)pchild->chnl_array[i].chnl_no);
387
/* Find decoding table. */
388
tbl = pchild->tables + pchild->tblprop_array[i].offset;
390
return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type,
391
pchild->tblprop_array[i].scale,
395
/* Function Description: Read noncpu-related data such as motherboard
397
* Return: Number of read bytes. Data is stored in bufdata in ascii format.
399
static int envctrl_read_noncpu_info(struct i2c_child_t *pchild,
400
char mon_type, unsigned char *bufdata)
406
for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
407
if (pchild->mon_type[i] == mon_type)
411
if (i >= PCF8584_MAX_CHANNELS)
414
/* Read data from address and port. */
415
data = envctrl_i2c_read_8591((unsigned char)pchild->addr,
416
(unsigned char)pchild->chnl_array[i].chnl_no);
418
/* Find decoding table. */
419
tbl = pchild->tables + pchild->tblprop_array[i].offset;
421
return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type,
422
pchild->tblprop_array[i].scale,
426
/* Function Description: Read fan status.
427
* Return : Always 1 byte. Status stored in bufdata.
429
static int envctrl_i2c_fan_status(struct i2c_child_t *pchild,
433
unsigned char tmp, ret = 0;
436
tmp = data & pchild->fan_mask;
438
if (tmp == pchild->fan_mask) {
439
/* All bits are on. All fans are functioning. */
440
ret = ENVCTRL_ALL_FANS_GOOD;
441
} else if (tmp == 0) {
442
/* No bits are on. No fans are functioning. */
443
ret = ENVCTRL_ALL_FANS_BAD;
445
/* Go through all channels, mark 'on' the matched bits.
446
* Notice that fan_mask may have discontiguous bits but
447
* return mask are always contiguous. For example if we
448
* monitor 4 fans at channels 0,1,2,4, the return mask
449
* should be 00010000 if only fan at channel 4 is working.
451
for (i = 0; i < PCF8584_MAX_CHANNELS;i++) {
452
if (pchild->fan_mask & chnls_mask[i]) {
453
if (!(chnls_mask[i] & tmp))
454
ret |= chnls_mask[j];
465
/* Function Description: Read global addressing line.
466
* Return : Always 1 byte. Status stored in bufdata.
468
static int envctrl_i2c_globaladdr(struct i2c_child_t *pchild,
472
/* Translatation table is not necessary, as global
473
* addr is the integer value of the GA# bits.
475
* NOTE: MSB is documented as zero, but I see it as '1' always....
477
* -----------------------------------------------
478
* | 0 | FAL | DEG | GA4 | GA3 | GA2 | GA1 | GA0 |
479
* -----------------------------------------------
480
* GA0 - GA4 integer value of Global Address (backplane slot#)
481
* DEG 0 = cPCI Power supply output is starting to degrade
482
* 1 = cPCI Power supply output is OK
483
* FAL 0 = cPCI Power supply has failed
484
* 1 = cPCI Power supply output is OK
486
bufdata[0] = (data & ENVCTRL_GLOBALADDR_ADDR_MASK);
490
/* Function Description: Read standard voltage and power supply status.
491
* Return : Always 1 byte. Status stored in bufdata.
493
static unsigned char envctrl_i2c_voltage_status(struct i2c_child_t *pchild,
497
unsigned char tmp, ret = 0;
500
tmp = data & pchild->voltage_mask;
502
/* Two channels are used to monitor voltage and power supply. */
503
if (tmp == pchild->voltage_mask) {
504
/* All bits are on. Voltage and power supply are okay. */
505
ret = ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD;
506
} else if (tmp == 0) {
507
/* All bits are off. Voltage and power supply are bad */
508
ret = ENVCTRL_VOLTAGE_POWERSUPPLY_BAD;
510
/* Either voltage or power supply has problem. */
511
for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
512
if (pchild->voltage_mask & chnls_mask[i]) {
515
/* Break out when there is a mismatch. */
516
if (!(chnls_mask[i] & tmp))
521
/* Make a wish that hardware will always use the
522
* first channel for voltage and the second for
526
ret = ENVCTRL_VOLTAGE_BAD;
528
ret = ENVCTRL_POWERSUPPLY_BAD;
535
/* Function Description: Read a byte from /dev/envctrl. Mapped to user read().
536
* Return: Number of read bytes. 0 for error.
539
envctrl_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
541
struct i2c_child_t *pchild;
542
unsigned char data[10];
545
/* Get the type of read as decided in ioctl() call.
546
* Find the appropriate i2c child.
547
* Get the data and put back to the user buffer.
550
switch ((int)(long)file->private_data) {
551
case ENVCTRL_RD_WARNING_TEMPERATURE:
552
if (warning_temperature == 0)
555
data[0] = (unsigned char)(warning_temperature);
557
if (copy_to_user(buf, data, ret))
561
case ENVCTRL_RD_SHUTDOWN_TEMPERATURE:
562
if (shutdown_temperature == 0)
565
data[0] = (unsigned char)(shutdown_temperature);
567
if (copy_to_user(buf, data, ret))
571
case ENVCTRL_RD_MTHRBD_TEMPERATURE:
572
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_MTHRBDTEMP_MON)))
574
ret = envctrl_read_noncpu_info(pchild, ENVCTRL_MTHRBDTEMP_MON, data);
575
if (copy_to_user(buf, data, ret))
579
case ENVCTRL_RD_CPU_TEMPERATURE:
580
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON)))
582
ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUTEMP_MON, data);
584
/* Reset cpu to the default cpu0. */
585
if (copy_to_user(buf, data, ret))
589
case ENVCTRL_RD_CPU_VOLTAGE:
590
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUVOLTAGE_MON)))
592
ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUVOLTAGE_MON, data);
594
/* Reset cpu to the default cpu0. */
595
if (copy_to_user(buf, data, ret))
599
case ENVCTRL_RD_SCSI_TEMPERATURE:
600
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_SCSITEMP_MON)))
602
ret = envctrl_read_noncpu_info(pchild, ENVCTRL_SCSITEMP_MON, data);
603
if (copy_to_user(buf, data, ret))
607
case ENVCTRL_RD_ETHERNET_TEMPERATURE:
608
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_ETHERTEMP_MON)))
610
ret = envctrl_read_noncpu_info(pchild, ENVCTRL_ETHERTEMP_MON, data);
611
if (copy_to_user(buf, data, ret))
615
case ENVCTRL_RD_FAN_STATUS:
616
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_FANSTAT_MON)))
618
data[0] = envctrl_i2c_read_8574(pchild->addr);
619
ret = envctrl_i2c_fan_status(pchild,data[0], data);
620
if (copy_to_user(buf, data, ret))
624
case ENVCTRL_RD_GLOBALADDRESS:
625
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON)))
627
data[0] = envctrl_i2c_read_8574(pchild->addr);
628
ret = envctrl_i2c_globaladdr(pchild, data[0], data);
629
if (copy_to_user(buf, data, ret))
633
case ENVCTRL_RD_VOLTAGE_STATUS:
634
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_VOLTAGESTAT_MON)))
635
/* If voltage monitor not present, check for CPCI equivalent */
636
if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON)))
638
data[0] = envctrl_i2c_read_8574(pchild->addr);
639
ret = envctrl_i2c_voltage_status(pchild, data[0], data);
640
if (copy_to_user(buf, data, ret))
652
/* Function Description: Command what to read. Mapped to user ioctl().
653
* Return: Gives 0 for implemented commands, -EINVAL otherwise.
656
envctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
658
char __user *infobuf;
661
case ENVCTRL_RD_WARNING_TEMPERATURE:
662
case ENVCTRL_RD_SHUTDOWN_TEMPERATURE:
663
case ENVCTRL_RD_MTHRBD_TEMPERATURE:
664
case ENVCTRL_RD_FAN_STATUS:
665
case ENVCTRL_RD_VOLTAGE_STATUS:
666
case ENVCTRL_RD_ETHERNET_TEMPERATURE:
667
case ENVCTRL_RD_SCSI_TEMPERATURE:
668
case ENVCTRL_RD_GLOBALADDRESS:
669
file->private_data = (void *)(long)cmd;
672
case ENVCTRL_RD_CPU_TEMPERATURE:
673
case ENVCTRL_RD_CPU_VOLTAGE:
674
/* Check to see if application passes in any cpu number,
675
* the default is cpu0.
677
infobuf = (char __user *) arg;
678
if (infobuf == NULL) {
681
get_user(read_cpu, infobuf);
684
/* Save the command for use when reading. */
685
file->private_data = (void *)(long)cmd;
695
/* Function Description: open device. Mapped to user open().
699
envctrl_open(struct inode *inode, struct file *file)
701
file->private_data = NULL;
705
/* Function Description: Open device. Mapped to user close().
709
envctrl_release(struct inode *inode, struct file *file)
714
static const struct file_operations envctrl_fops = {
715
.owner = THIS_MODULE,
716
.read = envctrl_read,
717
.unlocked_ioctl = envctrl_ioctl,
719
.compat_ioctl = envctrl_ioctl,
721
.open = envctrl_open,
722
.release = envctrl_release,
723
.llseek = noop_llseek,
726
static struct miscdevice envctrl_dev = {
732
/* Function Description: Set monitor type based on firmware description.
735
static void envctrl_set_mon(struct i2c_child_t *pchild,
736
const char *chnl_desc,
739
/* Firmware only has temperature type. It does not distinguish
740
* different kinds of temperatures. We use channel description
741
* to disinguish them.
743
if (!(strcmp(chnl_desc,"temp,cpu")) ||
744
!(strcmp(chnl_desc,"temp,cpu0")) ||
745
!(strcmp(chnl_desc,"temp,cpu1")) ||
746
!(strcmp(chnl_desc,"temp,cpu2")) ||
747
!(strcmp(chnl_desc,"temp,cpu3")))
748
pchild->mon_type[chnl_no] = ENVCTRL_CPUTEMP_MON;
750
if (!(strcmp(chnl_desc,"vddcore,cpu0")) ||
751
!(strcmp(chnl_desc,"vddcore,cpu1")) ||
752
!(strcmp(chnl_desc,"vddcore,cpu2")) ||
753
!(strcmp(chnl_desc,"vddcore,cpu3")))
754
pchild->mon_type[chnl_no] = ENVCTRL_CPUVOLTAGE_MON;
756
if (!(strcmp(chnl_desc,"temp,motherboard")))
757
pchild->mon_type[chnl_no] = ENVCTRL_MTHRBDTEMP_MON;
759
if (!(strcmp(chnl_desc,"temp,scsi")))
760
pchild->mon_type[chnl_no] = ENVCTRL_SCSITEMP_MON;
762
if (!(strcmp(chnl_desc,"temp,ethernet")))
763
pchild->mon_type[chnl_no] = ENVCTRL_ETHERTEMP_MON;
766
/* Function Description: Initialize monitor channel with channel desc,
767
* decoding tables, monitor type, optional properties.
770
static void envctrl_init_adc(struct i2c_child_t *pchild, struct device_node *dp)
774
const unsigned int *pval;
776
/* Firmware describe channels into a stream separated by a '\0'. */
777
pos = of_get_property(dp, "channels-description", &len);
780
int l = strlen(pos) + 1;
781
envctrl_set_mon(pchild, pos, i++);
786
/* Get optional properties. */
787
pval = of_get_property(dp, "warning-temp", NULL);
789
warning_temperature = *pval;
791
pval = of_get_property(dp, "shutdown-temp", NULL);
793
shutdown_temperature = *pval;
796
/* Function Description: Initialize child device monitoring fan status.
799
static void envctrl_init_fanstat(struct i2c_child_t *pchild)
803
/* Go through all channels and set up the mask. */
804
for (i = 0; i < pchild->total_chnls; i++)
805
pchild->fan_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];
807
/* We only need to know if this child has fan status monitored.
808
* We don't care which channels since we have the mask already.
810
pchild->mon_type[0] = ENVCTRL_FANSTAT_MON;
813
/* Function Description: Initialize child device for global addressing line.
816
static void envctrl_init_globaladdr(struct i2c_child_t *pchild)
820
/* Voltage/PowerSupply monitoring is piggybacked
821
* with Global Address on CompactPCI. See comments
822
* within envctrl_i2c_globaladdr for bit assignments.
824
* The mask is created here by assigning mask bits to each
825
* bit position that represents PCF8584_VOLTAGE_TYPE data.
826
* Channel numbers are not consecutive within the globaladdr
827
* node (why?), so we use the actual counter value as chnls_mask
828
* index instead of the chnl_array[x].chnl_no value.
830
* NOTE: This loop could be replaced with a constant representing
831
* a mask of bits 5&6 (ENVCTRL_GLOBALADDR_PSTAT_MASK).
833
for (i = 0; i < pchild->total_chnls; i++) {
834
if (PCF8584_VOLTAGE_TYPE == pchild->chnl_array[i].type) {
835
pchild->voltage_mask |= chnls_mask[i];
839
/* We only need to know if this child has global addressing
840
* line monitored. We don't care which channels since we know
841
* the mask already (ENVCTRL_GLOBALADDR_ADDR_MASK).
843
pchild->mon_type[0] = ENVCTRL_GLOBALADDR_MON;
846
/* Initialize child device monitoring voltage status. */
847
static void envctrl_init_voltage_status(struct i2c_child_t *pchild)
851
/* Go through all channels and set up the mask. */
852
for (i = 0; i < pchild->total_chnls; i++)
853
pchild->voltage_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];
855
/* We only need to know if this child has voltage status monitored.
856
* We don't care which channels since we have the mask already.
858
pchild->mon_type[0] = ENVCTRL_VOLTAGESTAT_MON;
861
/* Function Description: Initialize i2c child device.
864
static void envctrl_init_i2c_child(struct device_node *dp,
865
struct i2c_child_t *pchild)
867
int len, i, tbls_size = 0;
870
/* Get device address. */
871
pval = of_get_property(dp, "reg", &len);
872
memcpy(&pchild->addr, pval, len);
874
/* Get tables property. Read firmware temperature tables. */
875
pval = of_get_property(dp, "translation", &len);
876
if (pval && len > 0) {
877
memcpy(pchild->tblprop_array, pval, len);
878
pchild->total_tbls = len / sizeof(struct pcf8584_tblprop);
879
for (i = 0; i < pchild->total_tbls; i++) {
880
if ((pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset) > tbls_size) {
881
tbls_size = pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset;
885
pchild->tables = kmalloc(tbls_size, GFP_KERNEL);
886
if (pchild->tables == NULL){
887
printk(KERN_ERR PFX "Failed to allocate table.\n");
890
pval = of_get_property(dp, "tables", &len);
891
if (!pval || len <= 0) {
892
printk(KERN_ERR PFX "Failed to get table.\n");
895
memcpy(pchild->tables, pval, len);
898
/* SPARCengine ASM Reference Manual (ref. SMI doc 805-7581-04)
899
* sections 2.5, 3.5, 4.5 state node 0x70 for CP1400/1500 is
900
* "For Factory Use Only."
902
* We ignore the node on these platforms by assigning the
903
* 'NULL' monitor type.
905
if (ENVCTRL_CPCI_IGNORED_NODE == pchild->addr) {
906
struct device_node *root_node;
909
root_node = of_find_node_by_path("/");
910
if (!strcmp(root_node->name, "SUNW,UltraSPARC-IIi-cEngine")) {
911
for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
912
pchild->mon_type[len] = ENVCTRL_NOMON;
918
/* Get the monitor channels. */
919
pval = of_get_property(dp, "channels-in-use", &len);
920
memcpy(pchild->chnl_array, pval, len);
921
pchild->total_chnls = len / sizeof(struct pcf8584_channel);
923
for (i = 0; i < pchild->total_chnls; i++) {
924
switch (pchild->chnl_array[i].type) {
925
case PCF8584_TEMP_TYPE:
926
envctrl_init_adc(pchild, dp);
929
case PCF8584_GLOBALADDR_TYPE:
930
envctrl_init_globaladdr(pchild);
931
i = pchild->total_chnls;
934
case PCF8584_FANSTAT_TYPE:
935
envctrl_init_fanstat(pchild);
936
i = pchild->total_chnls;
939
case PCF8584_VOLTAGE_TYPE:
940
if (pchild->i2ctype == I2C_ADC) {
941
envctrl_init_adc(pchild,dp);
943
envctrl_init_voltage_status(pchild);
945
i = pchild->total_chnls;
954
/* Function Description: Search the child device list for a device.
955
* Return : The i2c child if found. NULL otherwise.
957
static struct i2c_child_t *envctrl_get_i2c_child(unsigned char mon_type)
961
for (i = 0; i < ENVCTRL_MAX_CPU*2; i++) {
962
for (j = 0; j < PCF8584_MAX_CHANNELS; j++) {
963
if (i2c_childlist[i].mon_type[j] == mon_type) {
964
return (struct i2c_child_t *)(&(i2c_childlist[i]));
971
static void envctrl_do_shutdown(void)
973
static int inprog = 0;
980
printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n");
981
ret = orderly_poweroff(true);
983
printk(KERN_CRIT "kenvctrld: WARNING: system shutdown failed!\n");
984
inprog = 0; /* unlikely to succeed, but we could try again */
988
static struct task_struct *kenvctrld_task;
990
static int kenvctrld(void *__unused)
995
struct i2c_child_t *cputemp;
997
if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) {
999
"kenvctrld unable to monitor CPU temp-- exiting\n");
1003
poll_interval = 5000; /* TODO env_mon_interval */
1005
printk(KERN_INFO PFX "%s starting...\n", current->comm);
1007
msleep_interruptible(poll_interval);
1009
if (kthread_should_stop())
1012
for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) {
1013
if (0 < envctrl_read_cpu_info(whichcpu, cputemp,
1014
ENVCTRL_CPUTEMP_MON,
1016
if (tempbuf[0] >= shutdown_temperature) {
1018
"%s: WARNING: CPU%i temperature %i C meets or exceeds "\
1019
"shutdown threshold %i C\n",
1020
current->comm, whichcpu,
1021
tempbuf[0], shutdown_temperature);
1022
envctrl_do_shutdown();
1027
printk(KERN_INFO PFX "%s exiting...\n", current->comm);
1031
static int __devinit envctrl_probe(struct platform_device *op)
1033
struct device_node *dp;
1039
i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME);
1044
dp = op->dev.of_node->child;
1046
if (!strcmp(dp->name, "gpio")) {
1047
i2c_childlist[index].i2ctype = I2C_GPIO;
1048
envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
1049
} else if (!strcmp(dp->name, "adc")) {
1050
i2c_childlist[index].i2ctype = I2C_ADC;
1051
envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
1057
/* Set device address. */
1058
writeb(CONTROL_PIN, i2c + PCF8584_CSR);
1059
writeb(PCF8584_ADDRESS, i2c + PCF8584_DATA);
1061
/* Set system clock and SCL frequencies. */
1062
writeb(CONTROL_PIN | CONTROL_ES1, i2c + PCF8584_CSR);
1063
writeb(CLK_4_43 | BUS_CLK_90, i2c + PCF8584_DATA);
1065
/* Enable serial interface. */
1066
writeb(CONTROL_PIN | CONTROL_ES0 | CONTROL_ACK, i2c + PCF8584_CSR);
1069
/* Register the device as a minor miscellaneous device. */
1070
err = misc_register(&envctrl_dev);
1072
printk(KERN_ERR PFX "Unable to get misc minor %d\n",
1077
/* Note above traversal routine post-incremented 'i' to accommodate
1078
* a next child device, so we decrement before reverse-traversal of
1081
printk(KERN_INFO PFX "Initialized ");
1082
for (--index; index >= 0; --index) {
1083
printk("[%s 0x%lx]%s",
1084
(I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" :
1085
((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"),
1086
i2c_childlist[index].addr, (0 == index) ? "\n" : " ");
1089
kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
1090
if (IS_ERR(kenvctrld_task)) {
1091
err = PTR_ERR(kenvctrld_task);
1092
goto out_deregister;
1098
misc_deregister(&envctrl_dev);
1100
of_iounmap(&op->resource[0], i2c, 0x2);
1101
for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
1102
kfree(i2c_childlist[index].tables);
1107
static int __devexit envctrl_remove(struct platform_device *op)
1111
kthread_stop(kenvctrld_task);
1113
of_iounmap(&op->resource[0], i2c, 0x2);
1114
misc_deregister(&envctrl_dev);
1116
for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
1117
kfree(i2c_childlist[index].tables);
1122
static const struct of_device_id envctrl_match[] = {
1125
.compatible = "i2cpcf,8584",
1129
MODULE_DEVICE_TABLE(of, envctrl_match);
1131
static struct platform_driver envctrl_driver = {
1133
.name = DRIVER_NAME,
1134
.owner = THIS_MODULE,
1135
.of_match_table = envctrl_match,
1137
.probe = envctrl_probe,
1138
.remove = __devexit_p(envctrl_remove),
1141
module_platform_driver(envctrl_driver);
1143
MODULE_LICENSE("GPL");