2
* Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
3
* of PCI-SCSI IO processors.
5
* Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
7
* This driver is derived from the Linux sym53c8xx driver.
8
* Copyright (C) 1998-2000 Gerard Roudier
10
* The sym53c8xx driver is derived from the ncr53c8xx driver that had been
11
* a port of the FreeBSD ncr driver to Linux-1.2.13.
13
* The original ncr driver has been written for 386bsd and FreeBSD by
14
* Wolfgang Stanglmeier <wolf@cologne.de>
15
* Stefan Esser <se@mi.Uni-Koeln.de>
16
* Copyright (C) 1994 Wolfgang Stanglmeier
18
* Other major contributions:
20
* NVRAM detection and reading.
21
* Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
23
*-----------------------------------------------------------------------------
25
* This program is free software; you can redistribute it and/or modify
26
* it under the terms of the GNU General Public License as published by
27
* the Free Software Foundation; either version 2 of the License, or
28
* (at your option) any later version.
30
* This program is distributed in the hope that it will be useful,
31
* but WITHOUT ANY WARRANTY; without even the implied warranty of
32
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
33
* GNU General Public License for more details.
35
* You should have received a copy of the GNU General Public License
36
* along with this program; if not, write to the Free Software
37
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
45
* DMA addressing mode.
47
* 0 : 32 bit addressing for all chips.
48
* 1 : 40 bit addressing when supported by chip.
49
* 2 : 64 bit addressing when supported by chip,
50
* limited to 16 segments of 4 GB -> 64 GB max.
52
#define SYM_CONF_DMA_ADDRESSING_MODE CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
58
#define SYM_CONF_NVRAM_SUPPORT (1)
62
* These options are not tunable from 'make config'
65
#define SYM_LINUX_PROC_INFO_SUPPORT
66
#define SYM_LINUX_USER_COMMAND_SUPPORT
67
#define SYM_LINUX_USER_INFO_SUPPORT
68
#define SYM_LINUX_DEBUG_CONTROL_SUPPORT
72
* Also handle old NCR chips if not (0).
74
#define SYM_CONF_GENERIC_SUPPORT (1)
77
* Allow tags from 2 to 256, default 8
79
#ifndef CONFIG_SCSI_SYM53C8XX_MAX_TAGS
80
#define CONFIG_SCSI_SYM53C8XX_MAX_TAGS (8)
83
#if CONFIG_SCSI_SYM53C8XX_MAX_TAGS < 2
84
#define SYM_CONF_MAX_TAG (2)
85
#elif CONFIG_SCSI_SYM53C8XX_MAX_TAGS > 256
86
#define SYM_CONF_MAX_TAG (256)
88
#define SYM_CONF_MAX_TAG CONFIG_SCSI_SYM53C8XX_MAX_TAGS
91
#ifndef CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS
92
#define CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS SYM_CONF_MAX_TAG
96
* Anyway, we configure the driver for at least 64 tags per LUN. :)
98
#if SYM_CONF_MAX_TAG <= 64
99
#define SYM_CONF_MAX_TAG_ORDER (6)
100
#elif SYM_CONF_MAX_TAG <= 128
101
#define SYM_CONF_MAX_TAG_ORDER (7)
103
#define SYM_CONF_MAX_TAG_ORDER (8)
107
* Max number of SG entries.
109
#define SYM_CONF_MAX_SG (96)
112
* Driver setup structure.
114
* This structure is initialized from linux config options.
115
* It can be overridden at boot-up by the boot command line.
117
struct sym_driver_setup {
123
u_char scsi_bus_check;
132
#define SYM_SETUP_MAX_TAG sym_driver_setup.max_tag
133
#define SYM_SETUP_BURST_ORDER sym_driver_setup.burst_order
134
#define SYM_SETUP_SCSI_LED sym_driver_setup.scsi_led
135
#define SYM_SETUP_SCSI_DIFF sym_driver_setup.scsi_diff
136
#define SYM_SETUP_IRQ_MODE sym_driver_setup.irq_mode
137
#define SYM_SETUP_SCSI_BUS_CHECK sym_driver_setup.scsi_bus_check
138
#define SYM_SETUP_HOST_ID sym_driver_setup.host_id
139
#define boot_verbose sym_driver_setup.verbose
144
* Can be overriden at startup by a command line.
146
#define SYM_LINUX_DRIVER_SETUP { \
147
.max_tag = CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS, \
152
.scsi_bus_check = 1, \
159
extern struct sym_driver_setup sym_driver_setup;
160
extern unsigned int sym_debug_flags;
161
#define DEBUG_FLAGS sym_debug_flags
164
* Max number of targets.
165
* Maximum is 16 and you are advised not to change this value.
167
#ifndef SYM_CONF_MAX_TARGET
168
#define SYM_CONF_MAX_TARGET (16)
172
* Max number of logical units.
173
* SPI-2 allows up to 64 logical units, but in real life, target
174
* that implements more that 7 logical units are pretty rare.
175
* Anyway, the cost of accepting up to 64 logical unit is low in
176
* this driver, thus going with the maximum is acceptable.
178
#ifndef SYM_CONF_MAX_LUN
179
#define SYM_CONF_MAX_LUN (64)
183
* Max number of IO control blocks queued to the controller.
184
* Each entry needs 8 bytes and the queues are allocated contiguously.
185
* Since we donnot want to allocate more than a page, the theorical
186
* maximum is PAGE_SIZE/8. For safety, we announce a bit less to the
188
* When not supplied, as it is suggested, the driver compute some
189
* good value for this parameter.
191
/* #define SYM_CONF_MAX_START (PAGE_SIZE/8 - 16) */
194
* Support for Immediate Arbitration.
197
/* #define SYM_CONF_IARB_SUPPORT */
200
* Only relevant if IARB support configured.
201
* - Max number of successive settings of IARB hints.
202
* - Set IARB on arbitration lost.
204
#define SYM_CONF_IARB_MAX 3
205
#define SYM_CONF_SET_IARB_ON_ARB_LOST 1
208
* Returning wrong residuals may make problems.
209
* When zero, this define tells the driver to
210
* always return 0 as transfer residual.
211
* Btw, all my testings of residuals have succeeded.
213
#define SYM_SETUP_RESIDUAL_SUPPORT 1
215
#endif /* SYM53C8XX_H */