2
* linux/arch/arm/mach-sa1100/simpad.c
5
#include <linux/module.h>
6
#include <linux/init.h>
7
#include <linux/kernel.h>
9
#include <linux/proc_fs.h>
10
#include <linux/string.h>
12
#include <linux/platform_device.h>
13
#include <linux/mtd/mtd.h>
14
#include <linux/mtd/partitions.h>
16
#include <linux/gpio.h>
19
#include <mach/hardware.h>
20
#include <asm/setup.h>
22
#include <asm/mach-types.h>
23
#include <asm/mach/arch.h>
24
#include <asm/mach/flash.h>
25
#include <asm/mach/map.h>
26
#include <asm/mach/serial_sa1100.h>
28
#include <mach/simpad.h>
30
#include <linux/serial_core.h>
31
#include <linux/ioport.h>
32
#include <linux/input.h>
33
#include <linux/gpio_keys.h>
34
#include <linux/leds.h>
35
#include <linux/i2c-gpio.h>
43
static long cs3_shadow;
44
static spinlock_t cs3_lock;
45
static struct gpio_chip cs3_gpio;
47
long simpad_get_cs3_ro(void)
49
return readl(CS3_BASE);
51
EXPORT_SYMBOL(simpad_get_cs3_ro);
53
long simpad_get_cs3_shadow(void)
57
EXPORT_SYMBOL(simpad_get_cs3_shadow);
59
static void __simpad_write_cs3(void)
61
writel(cs3_shadow, CS3_BASE);
64
void simpad_set_cs3_bit(int value)
68
spin_lock_irqsave(&cs3_lock, flags);
71
spin_unlock_irqrestore(&cs3_lock, flags);
73
EXPORT_SYMBOL(simpad_set_cs3_bit);
75
void simpad_clear_cs3_bit(int value)
79
spin_lock_irqsave(&cs3_lock, flags);
82
spin_unlock_irqrestore(&cs3_lock, flags);
84
EXPORT_SYMBOL(simpad_clear_cs3_bit);
86
static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
91
simpad_set_cs3_bit(1 << offset);
93
simpad_clear_cs3_bit(1 << offset);
96
static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
99
return simpad_get_cs3_ro() & (1 << (offset - 16));
100
return simpad_get_cs3_shadow() & (1 << offset);
103
static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
110
static int cs3_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
115
cs3_gpio_set(chip, offset, value);
119
static struct map_desc simpad_io_desc[] __initdata = {
121
.virtual = 0xf2800000,
122
.pfn = __phys_to_pfn(0x4b800000),
123
.length = 0x00800000,
125
}, { /* Simpad CS3 */
127
.pfn = __phys_to_pfn(SA1100_CS3_PHYS),
128
.length = 0x00100000,
134
static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
136
if (port->mapbase == (u_int)&Ser1UTCR0) {
139
simpad_clear_cs3_bit(RS232_ON);
140
simpad_clear_cs3_bit(DECT_POWER_ON);
143
simpad_set_cs3_bit(RS232_ON);
144
simpad_set_cs3_bit(DECT_POWER_ON);
149
static struct sa1100_port_fns simpad_port_fns __initdata = {
150
.pm = simpad_uart_pm,
154
static struct mtd_partition simpad_partitions[] = {
156
.name = "SIMpad boot firmware",
159
.mask_flags = MTD_WRITEABLE,
161
.name = "SIMpad kernel",
163
.offset = MTDPART_OFS_APPEND,
165
.name = "SIMpad root jffs2",
166
.size = MTDPART_SIZ_FULL,
167
.offset = MTDPART_OFS_APPEND,
171
static struct flash_platform_data simpad_flash_data = {
172
.map_name = "cfi_probe",
173
.parts = simpad_partitions,
174
.nr_parts = ARRAY_SIZE(simpad_partitions),
178
static struct resource simpad_flash_resources [] = {
180
.start = SA1100_CS0_PHYS,
181
.end = SA1100_CS0_PHYS + SZ_16M -1,
182
.flags = IORESOURCE_MEM,
184
.start = SA1100_CS1_PHYS,
185
.end = SA1100_CS1_PHYS + SZ_16M -1,
186
.flags = IORESOURCE_MEM,
190
static struct mcp_plat_data simpad_mcp_data = {
192
.sclk_rate = 11981000,
193
.gpio_base = SIMPAD_UCB1X00_GPIO_BASE,
198
static void __init simpad_map_io(void)
202
iotable_init(simpad_io_desc, ARRAY_SIZE(simpad_io_desc));
205
cs3_shadow = (EN1 | EN0 | LED2_ON | DISPLAY_ON |
206
RS232_ON | ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON);
207
__simpad_write_cs3(); /* Spinlocks not yet initialized */
209
sa1100_register_uart_fns(&simpad_port_fns);
210
sa1100_register_uart(0, 3); /* serial interface */
211
sa1100_register_uart(1, 1); /* DECT */
213
// Reassign UART 1 pins
214
GAFR |= GPIO_UART_TXD | GPIO_UART_RXD;
215
GPDR |= GPIO_UART_TXD | GPIO_LDD13 | GPIO_LDD15;
216
GPDR &= ~GPIO_UART_RXD;
220
* Set up registers for sleep mode.
224
PWER = PWER_GPIO0| PWER_RTC;
231
static void simpad_power_off(void)
234
cs3_shadow = SD_MEDIAQ;
235
__simpad_write_cs3(); /* Bypass spinlock here */
237
/* disable internal oscillator, float CS lines */
238
PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
239
/* enable wake-up on GPIO0 */
240
PWER = GFER = GRER = PWER_GPIO0;
242
* set scratchpad to zero, just in case it is used as a
243
* restart address by the bootloader.
247
/* enter sleep mode */
251
local_irq_enable(); /* we won't ever call it */
260
static struct gpio_keys_button simpad_button_table[] = {
261
{ KEY_POWER, IRQ_GPIO_POWER_BUTTON, 1, "power button" },
264
static struct gpio_keys_platform_data simpad_keys_data = {
265
.buttons = simpad_button_table,
266
.nbuttons = ARRAY_SIZE(simpad_button_table),
269
static struct platform_device simpad_keys = {
272
.platform_data = &simpad_keys_data,
276
static struct gpio_keys_button simpad_polled_button_table[] = {
277
{ KEY_PROG1, SIMPAD_UCB1X00_GPIO_PROG1, 1, "prog1 button" },
278
{ KEY_PROG2, SIMPAD_UCB1X00_GPIO_PROG2, 1, "prog2 button" },
279
{ KEY_UP, SIMPAD_UCB1X00_GPIO_UP, 1, "up button" },
280
{ KEY_DOWN, SIMPAD_UCB1X00_GPIO_DOWN, 1, "down button" },
281
{ KEY_LEFT, SIMPAD_UCB1X00_GPIO_LEFT, 1, "left button" },
282
{ KEY_RIGHT, SIMPAD_UCB1X00_GPIO_RIGHT, 1, "right button" },
285
static struct gpio_keys_platform_data simpad_polled_keys_data = {
286
.buttons = simpad_polled_button_table,
287
.nbuttons = ARRAY_SIZE(simpad_polled_button_table),
291
static struct platform_device simpad_polled_keys = {
292
.name = "gpio-keys-polled",
294
.platform_data = &simpad_polled_keys_data,
302
static struct gpio_led simpad_leds[] = {
304
.name = "simpad:power",
305
.gpio = SIMPAD_CS3_LED2_ON,
307
.default_trigger = "default-on",
311
static struct gpio_led_platform_data simpad_led_data = {
312
.num_leds = ARRAY_SIZE(simpad_leds),
316
static struct platform_device simpad_gpio_leds = {
320
.platform_data = &simpad_led_data,
327
static struct i2c_gpio_platform_data simpad_i2c_data = {
328
.sda_pin = GPIO_GPIO21,
329
.scl_pin = GPIO_GPIO25,
334
static struct platform_device simpad_i2c = {
338
.platform_data = &simpad_i2c_data,
343
* MediaQ Video Device
345
static struct platform_device simpad_mq200fb = {
346
.name = "simpad-mq200",
350
static struct platform_device *devices[] __initdata = {
360
static int __init simpad_init(void)
364
spin_lock_init(&cs3_lock);
366
cs3_gpio.label = "simpad_cs3";
367
cs3_gpio.base = SIMPAD_CS3_GPIO_BASE;
369
cs3_gpio.set = cs3_gpio_set;
370
cs3_gpio.get = cs3_gpio_get;
371
cs3_gpio.direction_input = cs3_gpio_direction_input;
372
cs3_gpio.direction_output = cs3_gpio_direction_output;
373
ret = gpiochip_add(&cs3_gpio);
375
printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
377
pm_power_off = simpad_power_off;
379
sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
380
ARRAY_SIZE(simpad_flash_resources));
381
sa11x0_register_mcp(&simpad_mcp_data);
383
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
385
printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device");
390
arch_initcall(simpad_init);
393
MACHINE_START(SIMPAD, "Simpad")
394
/* Maintainer: Holger Freyther */
395
.atag_offset = 0x100,
396
.map_io = simpad_map_io,
397
.init_irq = sa1100_init_irq,
398
.timer = &sa1100_timer,