1
#define MMC_REG_STR_STP_CLK 0x00
2
#define MMC_REG_STATUS 0x04
3
#define MMC_REG_CLK_RATE 0x08
4
#define MMC_REG_CMD_DAT_CONT 0x0C
5
#define MMC_REG_RES_TO 0x10
6
#define MMC_REG_READ_TO 0x14
7
#define MMC_REG_BLK_LEN 0x18
8
#define MMC_REG_NOB 0x1C
9
#define MMC_REG_REV_NO 0x20
10
#define MMC_REG_INT_MASK 0x24
11
#define MMC_REG_CMD 0x28
12
#define MMC_REG_ARGH 0x2C
13
#define MMC_REG_ARGL 0x30
14
#define MMC_REG_RES_FIFO 0x34
15
#define MMC_REG_BUFFER_ACCESS 0x38
17
#define STR_STP_CLK_IPG_CLK_GATE_DIS (1<<15)
18
#define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14)
19
#define STR_STP_CLK_ENDIAN (1<<5)
20
#define STR_STP_CLK_RESET (1<<3)
21
#define STR_STP_CLK_ENABLE (1<<2)
22
#define STR_STP_CLK_START_CLK (1<<1)
23
#define STR_STP_CLK_STOP_CLK (1<<0)
24
#define STATUS_CARD_PRESENCE (1<<15)
25
#define STATUS_SDIO_INT_ACTIVE (1<<14)
26
#define STATUS_END_CMD_RESP (1<<13)
27
#define STATUS_WRITE_OP_DONE (1<<12)
28
#define STATUS_DATA_TRANS_DONE (1<<11)
29
#define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10)
30
#define STATUS_CARD_BUS_CLK_RUN (1<<8)
31
#define STATUS_APPL_BUFF_FF (1<<7)
32
#define STATUS_APPL_BUFF_FE (1<<6)
33
#define STATUS_RESP_CRC_ERR (1<<5)
34
#define STATUS_CRC_READ_ERR (1<<3)
35
#define STATUS_CRC_WRITE_ERR (1<<2)
36
#define STATUS_TIME_OUT_RESP (1<<1)
37
#define STATUS_TIME_OUT_READ (1<<0)
38
#define STATUS_ERR_MASK 0x2f
39
#define CLK_RATE_PRESCALER(x) ((x) & 0x7)
40
#define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3)
41
#define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12)
42
#define CMD_DAT_CONT_STOP_READWAIT (1<<11)
43
#define CMD_DAT_CONT_START_READWAIT (1<<10)
44
#define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8)
45
#define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8)
46
#define CMD_DAT_CONT_INIT (1<<7)
47
#define CMD_DAT_CONT_BUSY (1<<6)
48
#define CMD_DAT_CONT_STREAM_BLOCK (1<<5)
49
#define CMD_DAT_CONT_WRITE (1<<4)
50
#define CMD_DAT_CONT_DATA_ENABLE (1<<3)
51
#define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1)
52
#define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2)
53
#define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3)
54
#define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4)
55
#define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5)
56
#define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6)
57
#define INT_MASK_AUTO_CARD_DETECT (1<<6)
58
#define INT_MASK_DAT0_EN (1<<5)
59
#define INT_MASK_SDIO (1<<4)
60
#define INT_MASK_BUF_READY (1<<3)
61
#define INT_MASK_END_CMD_RES (1<<2)
62
#define INT_MASK_WRITE_OP_DONE (1<<1)
63
#define INT_MASK_DATA_TRAN (1<<0)
64
#define INT_ALL (0x7f)