2
* Linux ARCnet driver - COM20020 chipset support
4
* Written 1997 by David Woodhouse.
5
* Written 1994-1999 by Avery Pennarun.
6
* Written 1999-2000 by Martin Mares <mj@ucw.cz>.
7
* Derived from skeleton.c by Donald Becker.
9
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
10
* for sponsoring the further development of this driver.
12
* **********************
14
* The original copyright of skeleton.c was as follows:
16
* skeleton.c Written 1993 by Donald Becker.
17
* Copyright 1993 United States Government as represented by the
18
* Director, National Security Agency. This software may only be used
19
* and distributed according to the terms of the GNU General Public License as
20
* modified by SRC, incorporated herein by reference.
22
* **********************
24
* For more details, see drivers/net/arcnet.c
26
* **********************
28
#include <linux/module.h>
29
#include <linux/moduleparam.h>
30
#include <linux/kernel.h>
31
#include <linux/types.h>
32
#include <linux/ioport.h>
33
#include <linux/errno.h>
34
#include <linux/delay.h>
35
#include <linux/netdevice.h>
36
#include <linux/init.h>
37
#include <linux/interrupt.h>
38
#include <linux/bootmem.h>
39
#include <linux/arcdevice.h>
40
#include <linux/com20020.h>
44
#define VERSION "arcnet: COM20020 ISA support (by David Woodhouse et al.)\n"
48
* We cannot (yet) probe for an IO mapped card, although we can check that
49
* it's where we were told it was, and even do autoirq.
51
static int __init com20020isa_probe(struct net_device *dev)
54
unsigned long airqmask;
55
struct arcnet_local *lp = netdev_priv(dev);
58
BUGLVL(D_NORMAL) printk(VERSION);
60
ioaddr = dev->base_addr;
62
BUGMSG(D_NORMAL, "No autoprobe (yet) for IO mapped cards; you "
63
"must specify the base address!\n");
66
if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) {
67
BUGMSG(D_NORMAL, "IO region %xh-%xh already allocated.\n",
68
ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
71
if (ASTATUS() == 0xFF) {
72
BUGMSG(D_NORMAL, "IO address %x empty\n", ioaddr);
76
if (com20020_check(dev)) {
82
/* if we do this, we're sure to get an IRQ since the
83
* card has just reset and the NORXflag is on until
84
* we tell it to start receiving.
86
BUGMSG(D_INIT_REASONS, "intmask was %02Xh\n", inb(_INTMASK));
88
airqmask = probe_irq_on();
89
outb(NORXflag, _INTMASK);
92
dev->irq = probe_irq_off(airqmask);
94
if ((int)dev->irq <= 0) {
95
BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed first time\n");
96
airqmask = probe_irq_on();
97
outb(NORXflag, _INTMASK);
100
dev->irq = probe_irq_off(airqmask);
101
if ((int)dev->irq <= 0) {
102
BUGMSG(D_NORMAL, "Autoprobe IRQ failed.\n");
109
lp->card_name = "ISA COM20020";
110
if ((err = com20020_found(dev, 0)) != 0)
116
release_region(ioaddr, ARCNET_TOTAL_SIZE);
121
static int io = 0x0; /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
122
static int irq = 0; /* or use the insmod io= irq= shmem= options */
123
static char device[9]; /* use eg. device="arc1" to change name */
124
static int timeout = 3;
125
static int backplane = 0;
126
static int clockp = 0;
127
static int clockm = 0;
129
module_param(node, int, 0);
130
module_param(io, int, 0);
131
module_param(irq, int, 0);
132
module_param_string(device, device, sizeof(device), 0);
133
module_param(timeout, int, 0);
134
module_param(backplane, int, 0);
135
module_param(clockp, int, 0);
136
module_param(clockm, int, 0);
138
MODULE_LICENSE("GPL");
140
static struct net_device *my_dev;
142
static int __init com20020_init(void)
144
struct net_device *dev;
145
struct arcnet_local *lp;
147
dev = alloc_arcdev(device);
151
if (node && node != 0xff)
152
dev->dev_addr[0] = node;
154
dev->netdev_ops = &com20020_netdev_ops;
156
lp = netdev_priv(dev);
157
lp->backplane = backplane;
158
lp->clockp = clockp & 7;
159
lp->clockm = clockm & 3;
160
lp->timeout = timeout & 3;
161
lp->hw.owner = THIS_MODULE;
169
if (com20020isa_probe(dev)) {
178
static void __exit com20020_exit(void)
180
unregister_netdev(my_dev);
181
free_irq(my_dev->irq, my_dev);
182
release_region(my_dev->base_addr, ARCNET_TOTAL_SIZE);
187
static int __init com20020isa_setup(char *s)
191
s = get_options(s, 8, ints);
197
printk("com90xx: Too many arguments.\n");
198
case 6: /* Timeout */
200
case 5: /* CKP value */
202
case 4: /* Backplane flag */
204
case 3: /* Node ID */
208
case 1: /* IO address */
212
snprintf(device, sizeof(device), "%s", s);
216
__setup("com20020=", com20020isa_setup);
220
module_init(com20020_init)
221
module_exit(com20020_exit)