2
* Adaptec AAC series RAID controller driver
3
* (c) Copyright 2001 Red Hat Inc.
5
* based on the old aacraid driver that is..
6
* Adaptec aacraid device driver for Linux.
8
* Copyright (c) 2000-2010 Adaptec, Inc.
9
* 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11
* This program is free software; you can redistribute it and/or modify
12
* it under the terms of the GNU General Public License as published by
13
* the Free Software Foundation; either version 2, or (at your option)
16
* This program is distributed in the hope that it will be useful,
17
* but WITHOUT ANY WARRANTY; without even the implied warranty of
18
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19
* GNU General Public License for more details.
21
* You should have received a copy of the GNU General Public License
22
* along with this program; see the file COPYING. If not, write to
23
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
27
#include <linux/kernel.h>
28
#include <linux/init.h>
29
#include <linux/types.h>
30
#include <linux/pci.h>
31
#include <linux/spinlock.h>
32
#include <linux/slab.h>
33
#include <linux/completion.h>
34
#include <linux/blkdev.h>
35
#include <asm/uaccess.h>
36
#include <linux/highmem.h> /* For flush_kernel_dcache_page */
37
#include <linux/module.h>
39
#include <scsi/scsi.h>
40
#include <scsi/scsi_cmnd.h>
41
#include <scsi/scsi_device.h>
42
#include <scsi/scsi_host.h>
46
/* values for inqd_pdt: Peripheral device type in plain English */
47
#define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
48
#define INQD_PDT_PROC 0x03 /* Processor device */
49
#define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
50
#define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
51
#define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
52
#define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
54
#define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
55
#define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
61
#define SENCODE_NO_SENSE 0x00
62
#define SENCODE_END_OF_DATA 0x00
63
#define SENCODE_BECOMING_READY 0x04
64
#define SENCODE_INIT_CMD_REQUIRED 0x04
65
#define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
66
#define SENCODE_INVALID_COMMAND 0x20
67
#define SENCODE_LBA_OUT_OF_RANGE 0x21
68
#define SENCODE_INVALID_CDB_FIELD 0x24
69
#define SENCODE_LUN_NOT_SUPPORTED 0x25
70
#define SENCODE_INVALID_PARAM_FIELD 0x26
71
#define SENCODE_PARAM_NOT_SUPPORTED 0x26
72
#define SENCODE_PARAM_VALUE_INVALID 0x26
73
#define SENCODE_RESET_OCCURRED 0x29
74
#define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
75
#define SENCODE_INQUIRY_DATA_CHANGED 0x3F
76
#define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
77
#define SENCODE_DIAGNOSTIC_FAILURE 0x40
78
#define SENCODE_INTERNAL_TARGET_FAILURE 0x44
79
#define SENCODE_INVALID_MESSAGE_ERROR 0x49
80
#define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
81
#define SENCODE_OVERLAPPED_COMMAND 0x4E
84
* Additional sense codes
87
#define ASENCODE_NO_SENSE 0x00
88
#define ASENCODE_END_OF_DATA 0x05
89
#define ASENCODE_BECOMING_READY 0x01
90
#define ASENCODE_INIT_CMD_REQUIRED 0x02
91
#define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
92
#define ASENCODE_INVALID_COMMAND 0x00
93
#define ASENCODE_LBA_OUT_OF_RANGE 0x00
94
#define ASENCODE_INVALID_CDB_FIELD 0x00
95
#define ASENCODE_LUN_NOT_SUPPORTED 0x00
96
#define ASENCODE_INVALID_PARAM_FIELD 0x00
97
#define ASENCODE_PARAM_NOT_SUPPORTED 0x01
98
#define ASENCODE_PARAM_VALUE_INVALID 0x02
99
#define ASENCODE_RESET_OCCURRED 0x00
100
#define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
101
#define ASENCODE_INQUIRY_DATA_CHANGED 0x03
102
#define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
103
#define ASENCODE_DIAGNOSTIC_FAILURE 0x80
104
#define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
105
#define ASENCODE_INVALID_MESSAGE_ERROR 0x00
106
#define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
107
#define ASENCODE_OVERLAPPED_COMMAND 0x00
109
#define BYTE0(x) (unsigned char)(x)
110
#define BYTE1(x) (unsigned char)((x) >> 8)
111
#define BYTE2(x) (unsigned char)((x) >> 16)
112
#define BYTE3(x) (unsigned char)((x) >> 24)
114
/*------------------------------------------------------------------------------
115
* S T R U C T S / T Y P E D E F S
116
*----------------------------------------------------------------------------*/
117
/* SCSI inquiry data */
118
struct inquiry_data {
119
u8 inqd_pdt; /* Peripheral qualifier | Peripheral Device Type */
120
u8 inqd_dtq; /* RMB | Device Type Qualifier */
121
u8 inqd_ver; /* ISO version | ECMA version | ANSI-approved version */
122
u8 inqd_rdf; /* AENC | TrmIOP | Response data format */
123
u8 inqd_len; /* Additional length (n-4) */
124
u8 inqd_pad1[2];/* Reserved - must be zero */
125
u8 inqd_pad2; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
126
u8 inqd_vid[8]; /* Vendor ID */
127
u8 inqd_pid[16];/* Product ID */
128
u8 inqd_prl[4]; /* Product Revision Level */
132
* M O D U L E G L O B A L S
135
static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap);
136
static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg);
137
static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg);
138
static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
139
#ifdef AAC_DETAILED_STATUS_INFO
140
static char *aac_get_status_string(u32 status);
144
* Non dasd selection is handled entirely in aachba now
147
static int nondasd = -1;
148
static int aac_cache = 2; /* WCE=0 to avoid performance problems */
149
static int dacmode = -1;
152
int startup_timeout = 180;
153
int aif_timeout = 120;
155
module_param(nondasd, int, S_IRUGO|S_IWUSR);
156
MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices."
158
module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
159
MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n"
160
"\tbit 0 - Disable FUA in WRITE SCSI commands\n"
161
"\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
162
"\tbit 2 - Disable only if Battery is protecting Cache");
163
module_param(dacmode, int, S_IRUGO|S_IWUSR);
164
MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC."
166
module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
167
MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
168
" adapter for foreign arrays.\n"
169
"This is typically needed in systems that do not have a BIOS."
171
module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
172
MODULE_PARM_DESC(msi, "IRQ handling."
173
" 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
174
module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
175
MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
176
" adapter to have it's kernel up and\n"
177
"running. This is typically adjusted for large systems that do not"
179
module_param(aif_timeout, int, S_IRUGO|S_IWUSR);
180
MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for"
181
" applications to pick up AIFs before\n"
182
"deregistering them. This is typically adjusted for heavily burdened"
186
module_param(numacb, int, S_IRUGO|S_IWUSR);
187
MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control"
188
" blocks (FIB) allocated. Valid values are 512 and down. Default is"
189
" to use suggestion from Firmware.");
192
module_param(acbsize, int, S_IRUGO|S_IWUSR);
193
MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)"
194
" size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
195
" suggestion from Firmware.");
197
int update_interval = 30 * 60;
198
module_param(update_interval, int, S_IRUGO|S_IWUSR);
199
MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync"
200
" updates issued to adapter.");
202
int check_interval = 24 * 60 * 60;
203
module_param(check_interval, int, S_IRUGO|S_IWUSR);
204
MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health"
207
int aac_check_reset = 1;
208
module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR);
209
MODULE_PARM_DESC(check_reset, "If adapter fails health check, reset the"
210
" adapter. a value of -1 forces the reset to adapters programmed to"
213
int expose_physicals = -1;
214
module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
215
MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays."
216
" -1=protect 0=off, 1=on");
218
int aac_reset_devices;
219
module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
220
MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
223
module_param_named(wwn, aac_wwn, int, S_IRUGO|S_IWUSR);
224
MODULE_PARM_DESC(wwn, "Select a WWN type for the arrays:\n"
226
"\t1 - Array Meta Data Signature (default)\n"
227
"\t2 - Adapter Serial Number");
230
static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
231
struct fib *fibptr) {
232
struct scsi_device *device;
234
if (unlikely(!scsicmd || !scsicmd->scsi_done)) {
235
dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"));
236
aac_fib_complete(fibptr);
237
aac_fib_free(fibptr);
240
scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
241
device = scsicmd->device;
242
if (unlikely(!device || !scsi_device_online(device))) {
243
dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
244
aac_fib_complete(fibptr);
245
aac_fib_free(fibptr);
252
* aac_get_config_status - check the adapter configuration
253
* @common: adapter to query
255
* Query config status, and commit the configuration if needed.
257
int aac_get_config_status(struct aac_dev *dev, int commit_flag)
262
if (!(fibptr = aac_fib_alloc(dev)))
265
aac_fib_init(fibptr);
267
struct aac_get_config_status *dinfo;
268
dinfo = (struct aac_get_config_status *) fib_data(fibptr);
270
dinfo->command = cpu_to_le32(VM_ContainerConfig);
271
dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS);
272
dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data));
275
status = aac_fib_send(ContainerCommand,
277
sizeof (struct aac_get_config_status),
282
printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n");
284
struct aac_get_config_status_resp *reply
285
= (struct aac_get_config_status_resp *) fib_data(fibptr);
286
dprintk((KERN_WARNING
287
"aac_get_config_status: response=%d status=%d action=%d\n",
288
le32_to_cpu(reply->response),
289
le32_to_cpu(reply->status),
290
le32_to_cpu(reply->data.action)));
291
if ((le32_to_cpu(reply->response) != ST_OK) ||
292
(le32_to_cpu(reply->status) != CT_OK) ||
293
(le32_to_cpu(reply->data.action) > CFACT_PAUSE)) {
294
printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n");
298
/* Do not set XferState to zero unless receives a response from F/W */
300
aac_fib_complete(fibptr);
302
/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
304
if ((aac_commit == 1) || commit_flag) {
305
struct aac_commit_config * dinfo;
306
aac_fib_init(fibptr);
307
dinfo = (struct aac_commit_config *) fib_data(fibptr);
309
dinfo->command = cpu_to_le32(VM_ContainerConfig);
310
dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG);
312
status = aac_fib_send(ContainerCommand,
314
sizeof (struct aac_commit_config),
318
/* Do not set XferState to zero unless
319
* receives a response from F/W */
321
aac_fib_complete(fibptr);
322
} else if (aac_commit == 0) {
324
"aac_get_config_status: Foreign device configurations are being ignored\n");
327
/* FIB should be freed only after getting the response from the F/W */
328
if (status != -ERESTARTSYS)
329
aac_fib_free(fibptr);
333
static void aac_expose_phy_device(struct scsi_cmnd *scsicmd)
336
scsi_sg_copy_to_buffer(scsicmd, &inq_data, sizeof(inq_data));
337
if ((inq_data & 0x20) && (inq_data & 0x1f) == TYPE_DISK) {
339
scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
344
* aac_get_containers - list containers
345
* @common: adapter to probe
347
* Make a list of all containers on this controller
349
int aac_get_containers(struct aac_dev *dev)
351
struct fsa_dev_info *fsa_dev_ptr;
355
struct aac_get_container_count *dinfo;
356
struct aac_get_container_count_resp *dresp;
357
int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
359
if (!(fibptr = aac_fib_alloc(dev)))
362
aac_fib_init(fibptr);
363
dinfo = (struct aac_get_container_count *) fib_data(fibptr);
364
dinfo->command = cpu_to_le32(VM_ContainerConfig);
365
dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT);
367
status = aac_fib_send(ContainerCommand,
369
sizeof (struct aac_get_container_count),
374
dresp = (struct aac_get_container_count_resp *)fib_data(fibptr);
375
maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
376
aac_fib_complete(fibptr);
378
/* FIB should be freed only after getting the response from the F/W */
379
if (status != -ERESTARTSYS)
380
aac_fib_free(fibptr);
382
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
383
maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
384
fsa_dev_ptr = kzalloc(sizeof(*fsa_dev_ptr) * maximum_num_containers,
389
dev->fsa_dev = fsa_dev_ptr;
390
dev->maximum_num_containers = maximum_num_containers;
392
for (index = 0; index < dev->maximum_num_containers; ) {
393
fsa_dev_ptr[index].devname[0] = '\0';
395
status = aac_probe_container(dev, index);
398
printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
403
* If there are no more containers, then stop asking.
405
if (++index >= status)
411
static void get_container_name_callback(void *context, struct fib * fibptr)
413
struct aac_get_name_resp * get_name_reply;
414
struct scsi_cmnd * scsicmd;
416
scsicmd = (struct scsi_cmnd *) context;
418
if (!aac_valid_context(scsicmd, fibptr))
421
dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
422
BUG_ON(fibptr == NULL);
424
get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr);
425
/* Failure is irrelevant, using default value instead */
426
if ((le32_to_cpu(get_name_reply->status) == CT_OK)
427
&& (get_name_reply->data[0] != '\0')) {
428
char *sp = get_name_reply->data;
429
sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0';
433
struct inquiry_data inq;
434
char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)];
435
int count = sizeof(d);
438
*dp++ = (*sp) ? *sp++ : ' ';
439
} while (--count > 0);
441
scsi_sg_copy_to_buffer(scsicmd, &inq, sizeof(inq));
442
memcpy(inq.inqd_pid, d, sizeof(d));
443
scsi_sg_copy_from_buffer(scsicmd, &inq, sizeof(inq));
447
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
449
aac_fib_complete(fibptr);
450
aac_fib_free(fibptr);
451
scsicmd->scsi_done(scsicmd);
455
* aac_get_container_name - get container name, none blocking.
457
static int aac_get_container_name(struct scsi_cmnd * scsicmd)
460
struct aac_get_name *dinfo;
461
struct fib * cmd_fibcontext;
462
struct aac_dev * dev;
464
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
466
if (!(cmd_fibcontext = aac_fib_alloc(dev)))
469
aac_fib_init(cmd_fibcontext);
470
dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
472
dinfo->command = cpu_to_le32(VM_ContainerConfig);
473
dinfo->type = cpu_to_le32(CT_READ_NAME);
474
dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
475
dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
477
status = aac_fib_send(ContainerCommand,
479
sizeof (struct aac_get_name),
482
(fib_callback)get_container_name_callback,
486
* Check that the command queued to the controller
488
if (status == -EINPROGRESS) {
489
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
493
printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
494
aac_fib_complete(cmd_fibcontext);
495
aac_fib_free(cmd_fibcontext);
499
static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd)
501
struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
503
if ((fsa_dev_ptr[scmd_id(scsicmd)].valid & 1))
504
return aac_scsi_cmd(scsicmd);
506
scsicmd->result = DID_NO_CONNECT << 16;
507
scsicmd->scsi_done(scsicmd);
511
static void _aac_probe_container2(void * context, struct fib * fibptr)
513
struct fsa_dev_info *fsa_dev_ptr;
514
int (*callback)(struct scsi_cmnd *);
515
struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context;
518
if (!aac_valid_context(scsicmd, fibptr))
521
scsicmd->SCp.Status = 0;
522
fsa_dev_ptr = fibptr->dev->fsa_dev;
524
struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr);
525
fsa_dev_ptr += scmd_id(scsicmd);
527
if ((le32_to_cpu(dresp->status) == ST_OK) &&
528
(le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
529
(le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
530
fsa_dev_ptr->valid = 1;
531
/* sense_key holds the current state of the spin-up */
532
if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
533
fsa_dev_ptr->sense_data.sense_key = NOT_READY;
534
else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
535
fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
536
fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
538
= ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
539
(((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
540
fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0);
542
if ((fsa_dev_ptr->valid & 1) == 0)
543
fsa_dev_ptr->valid = 0;
544
scsicmd->SCp.Status = le32_to_cpu(dresp->count);
546
aac_fib_complete(fibptr);
547
aac_fib_free(fibptr);
548
callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr);
549
scsicmd->SCp.ptr = NULL;
550
(*callback)(scsicmd);
554
static void _aac_probe_container1(void * context, struct fib * fibptr)
556
struct scsi_cmnd * scsicmd;
557
struct aac_mount * dresp;
558
struct aac_query_mount *dinfo;
561
dresp = (struct aac_mount *) fib_data(fibptr);
562
dresp->mnt[0].capacityhigh = 0;
563
if ((le32_to_cpu(dresp->status) != ST_OK) ||
564
(le32_to_cpu(dresp->mnt[0].vol) != CT_NONE)) {
565
_aac_probe_container2(context, fibptr);
568
scsicmd = (struct scsi_cmnd *) context;
570
if (!aac_valid_context(scsicmd, fibptr))
573
aac_fib_init(fibptr);
575
dinfo = (struct aac_query_mount *)fib_data(fibptr);
577
dinfo->command = cpu_to_le32(VM_NameServe64);
578
dinfo->count = cpu_to_le32(scmd_id(scsicmd));
579
dinfo->type = cpu_to_le32(FT_FILESYS);
581
status = aac_fib_send(ContainerCommand,
583
sizeof(struct aac_query_mount),
586
_aac_probe_container2,
589
* Check that the command queued to the controller
591
if (status == -EINPROGRESS)
592
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
593
else if (status < 0) {
594
/* Inherit results from VM_NameServe, if any */
595
dresp->status = cpu_to_le32(ST_OK);
596
_aac_probe_container2(context, fibptr);
600
static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *))
603
int status = -ENOMEM;
605
if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) {
606
struct aac_query_mount *dinfo;
608
aac_fib_init(fibptr);
610
dinfo = (struct aac_query_mount *)fib_data(fibptr);
612
dinfo->command = cpu_to_le32(VM_NameServe);
613
dinfo->count = cpu_to_le32(scmd_id(scsicmd));
614
dinfo->type = cpu_to_le32(FT_FILESYS);
615
scsicmd->SCp.ptr = (char *)callback;
617
status = aac_fib_send(ContainerCommand,
619
sizeof(struct aac_query_mount),
622
_aac_probe_container1,
625
* Check that the command queued to the controller
627
if (status == -EINPROGRESS) {
628
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
632
scsicmd->SCp.ptr = NULL;
633
aac_fib_complete(fibptr);
634
aac_fib_free(fibptr);
638
struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
640
fsa_dev_ptr += scmd_id(scsicmd);
641
if ((fsa_dev_ptr->valid & 1) == 0) {
642
fsa_dev_ptr->valid = 0;
643
return (*callback)(scsicmd);
651
* aac_probe_container - query a logical volume
652
* @dev: device to query
653
* @cid: container identifier
655
* Queries the controller about the given volume. The volume information
656
* is updated in the struct fsa_dev_info structure rather than returned.
658
static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
660
scsicmd->device = NULL;
664
int aac_probe_container(struct aac_dev *dev, int cid)
666
struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
667
struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL);
670
if (!scsicmd || !scsidev) {
675
scsicmd->list.next = NULL;
676
scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))aac_probe_container_callback1;
678
scsicmd->device = scsidev;
679
scsidev->sdev_state = 0;
681
scsidev->host = dev->scsi_host_ptr;
683
if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0)
684
while (scsicmd->device == scsidev)
687
status = scsicmd->SCp.Status;
692
/* Local Structure to set SCSI inquiry data strings */
694
char vid[8]; /* Vendor ID */
695
char pid[16]; /* Product ID */
696
char prl[4]; /* Product Revision Level */
700
* InqStrCopy - string merge
701
* @a: string to copy from
702
* @b: string to copy to
704
* Copy a String from one location to another
708
static void inqstrcpy(char *a, char *b)
711
while (*a != (char)0)
715
static char *container_types[] = {
739
char * get_container_type(unsigned tindex)
741
if (tindex >= ARRAY_SIZE(container_types))
742
tindex = ARRAY_SIZE(container_types) - 1;
743
return container_types[tindex];
746
/* Function: setinqstr
748
* Arguments: [1] pointer to void [1] int
750
* Purpose: Sets SCSI inquiry data strings for vendor, product
751
* and revision level. Allows strings to be set in platform dependent
752
* files instead of in OS dependent driver source.
755
static void setinqstr(struct aac_dev *dev, void *data, int tindex)
757
struct scsi_inq *str;
759
str = (struct scsi_inq *)(data); /* cast data to scsi inq block */
760
memset(str, ' ', sizeof(*str));
762
if (dev->supplement_adapter_info.AdapterTypeText[0]) {
763
char * cp = dev->supplement_adapter_info.AdapterTypeText;
765
if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C'))
766
inqstrcpy("SMC", str->vid);
768
c = sizeof(str->vid);
769
while (*cp && *cp != ' ' && --c)
773
inqstrcpy (dev->supplement_adapter_info.AdapterTypeText,
776
while (*cp && *cp != ' ')
781
/* last six chars reserved for vol type */
783
if (strlen(cp) > sizeof(str->pid)) {
784
c = cp[sizeof(str->pid)];
785
cp[sizeof(str->pid)] = '\0';
787
inqstrcpy (cp, str->pid);
789
cp[sizeof(str->pid)] = c;
791
struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype);
793
inqstrcpy (mp->vname, str->vid);
794
/* last six chars reserved for vol type */
795
inqstrcpy (mp->model, str->pid);
798
if (tindex < ARRAY_SIZE(container_types)){
799
char *findit = str->pid;
801
for ( ; *findit != ' '; findit++); /* walk till we find a space */
802
/* RAID is superfluous in the context of a RAID device */
803
if (memcmp(findit-4, "RAID", 4) == 0)
804
*(findit -= 4) = ' ';
805
if (((findit - str->pid) + strlen(container_types[tindex]))
806
< (sizeof(str->pid) + sizeof(str->prl)))
807
inqstrcpy (container_types[tindex], findit + 1);
809
inqstrcpy ("V1.0", str->prl);
812
static void get_container_serial_callback(void *context, struct fib * fibptr)
814
struct aac_get_serial_resp * get_serial_reply;
815
struct scsi_cmnd * scsicmd;
817
BUG_ON(fibptr == NULL);
819
scsicmd = (struct scsi_cmnd *) context;
820
if (!aac_valid_context(scsicmd, fibptr))
823
get_serial_reply = (struct aac_get_serial_resp *) fib_data(fibptr);
824
/* Failure is irrelevant, using default value instead */
825
if (le32_to_cpu(get_serial_reply->status) == CT_OK) {
829
sp[1] = scsicmd->cmnd[2];
831
sp[3] = snprintf(sp+4, sizeof(sp)-4, "%08X",
832
le32_to_cpu(get_serial_reply->uid));
833
scsi_sg_copy_from_buffer(scsicmd, sp, sizeof(sp));
836
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
838
aac_fib_complete(fibptr);
839
aac_fib_free(fibptr);
840
scsicmd->scsi_done(scsicmd);
844
* aac_get_container_serial - get container serial, none blocking.
846
static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
849
struct aac_get_serial *dinfo;
850
struct fib * cmd_fibcontext;
851
struct aac_dev * dev;
853
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
855
if (!(cmd_fibcontext = aac_fib_alloc(dev)))
858
aac_fib_init(cmd_fibcontext);
859
dinfo = (struct aac_get_serial *) fib_data(cmd_fibcontext);
861
dinfo->command = cpu_to_le32(VM_ContainerConfig);
862
dinfo->type = cpu_to_le32(CT_CID_TO_32BITS_UID);
863
dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
865
status = aac_fib_send(ContainerCommand,
867
sizeof (struct aac_get_serial),
870
(fib_callback) get_container_serial_callback,
874
* Check that the command queued to the controller
876
if (status == -EINPROGRESS) {
877
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
881
printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status);
882
aac_fib_complete(cmd_fibcontext);
883
aac_fib_free(cmd_fibcontext);
887
/* Function: setinqserial
889
* Arguments: [1] pointer to void [1] int
891
* Purpose: Sets SCSI Unit Serial number.
892
* This is a fake. We should read a proper
893
* serial number from the container. <SuSE>But
894
* without docs it's quite hard to do it :-)
895
* So this will have to do in the meantime.</SuSE>
898
static int setinqserial(struct aac_dev *dev, void *data, int cid)
901
* This breaks array migration.
903
return snprintf((char *)(data), sizeof(struct scsi_inq) - 4, "%08X%02X",
904
le32_to_cpu(dev->adapter_info.serial[0]), cid);
907
static inline void set_sense(struct sense_data *sense_data, u8 sense_key,
908
u8 sense_code, u8 a_sense_code, u8 bit_pointer, u16 field_pointer)
910
u8 *sense_buf = (u8 *)sense_data;
911
/* Sense data valid, err code 70h */
912
sense_buf[0] = 0x70; /* No info field */
913
sense_buf[1] = 0; /* Segment number, always zero */
915
sense_buf[2] = sense_key; /* Sense key */
917
sense_buf[12] = sense_code; /* Additional sense code */
918
sense_buf[13] = a_sense_code; /* Additional sense code qualifier */
920
if (sense_key == ILLEGAL_REQUEST) {
921
sense_buf[7] = 10; /* Additional sense length */
923
sense_buf[15] = bit_pointer;
924
/* Illegal parameter is in the parameter block */
925
if (sense_code == SENCODE_INVALID_CDB_FIELD)
926
sense_buf[15] |= 0xc0;/* Std sense key specific field */
927
/* Illegal parameter is in the CDB block */
928
sense_buf[16] = field_pointer >> 8; /* MSB */
929
sense_buf[17] = field_pointer; /* LSB */
931
sense_buf[7] = 6; /* Additional sense length */
934
static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
936
if (lba & 0xffffffff00000000LL) {
937
int cid = scmd_id(cmd);
938
dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
939
cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
940
SAM_STAT_CHECK_CONDITION;
941
set_sense(&dev->fsa_dev[cid].sense_data,
942
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
943
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
944
memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
945
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
946
SCSI_SENSE_BUFFERSIZE));
953
static int aac_bounds_64(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
958
static void io_callback(void *context, struct fib * fibptr);
960
static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
963
struct aac_raw_io *readcmd;
965
readcmd = (struct aac_raw_io *) fib_data(fib);
966
readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
967
readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
968
readcmd->count = cpu_to_le32(count<<9);
969
readcmd->cid = cpu_to_le16(scmd_id(cmd));
970
readcmd->flags = cpu_to_le16(IO_TYPE_READ);
971
readcmd->bpTotal = 0;
972
readcmd->bpComplete = 0;
974
aac_build_sgraw(cmd, &readcmd->sg);
975
fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw));
976
BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
978
* Now send the Fib to the adapter
980
return aac_fib_send(ContainerRawIo,
985
(fib_callback) io_callback,
989
static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
992
struct aac_read64 *readcmd;
994
readcmd = (struct aac_read64 *) fib_data(fib);
995
readcmd->command = cpu_to_le32(VM_CtHostRead64);
996
readcmd->cid = cpu_to_le16(scmd_id(cmd));
997
readcmd->sector_count = cpu_to_le16(count);
998
readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1002
aac_build_sg64(cmd, &readcmd->sg);
1003
fibsize = sizeof(struct aac_read64) +
1004
((le32_to_cpu(readcmd->sg.count) - 1) *
1005
sizeof (struct sgentry64));
1006
BUG_ON (fibsize > (fib->dev->max_fib_size -
1007
sizeof(struct aac_fibhdr)));
1009
* Now send the Fib to the adapter
1011
return aac_fib_send(ContainerCommand64,
1016
(fib_callback) io_callback,
1020
static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
1023
struct aac_read *readcmd;
1025
readcmd = (struct aac_read *) fib_data(fib);
1026
readcmd->command = cpu_to_le32(VM_CtBlockRead);
1027
readcmd->cid = cpu_to_le32(scmd_id(cmd));
1028
readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1029
readcmd->count = cpu_to_le32(count * 512);
1031
aac_build_sg(cmd, &readcmd->sg);
1032
fibsize = sizeof(struct aac_read) +
1033
((le32_to_cpu(readcmd->sg.count) - 1) *
1034
sizeof (struct sgentry));
1035
BUG_ON (fibsize > (fib->dev->max_fib_size -
1036
sizeof(struct aac_fibhdr)));
1038
* Now send the Fib to the adapter
1040
return aac_fib_send(ContainerCommand,
1045
(fib_callback) io_callback,
1049
static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1052
struct aac_raw_io *writecmd;
1054
writecmd = (struct aac_raw_io *) fib_data(fib);
1055
writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
1056
writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1057
writecmd->count = cpu_to_le32(count<<9);
1058
writecmd->cid = cpu_to_le16(scmd_id(cmd));
1059
writecmd->flags = (fua && ((aac_cache & 5) != 1) &&
1060
(((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
1061
cpu_to_le16(IO_TYPE_WRITE|IO_SUREWRITE) :
1062
cpu_to_le16(IO_TYPE_WRITE);
1063
writecmd->bpTotal = 0;
1064
writecmd->bpComplete = 0;
1066
aac_build_sgraw(cmd, &writecmd->sg);
1067
fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw));
1068
BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
1070
* Now send the Fib to the adapter
1072
return aac_fib_send(ContainerRawIo,
1077
(fib_callback) io_callback,
1081
static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1084
struct aac_write64 *writecmd;
1086
writecmd = (struct aac_write64 *) fib_data(fib);
1087
writecmd->command = cpu_to_le32(VM_CtHostWrite64);
1088
writecmd->cid = cpu_to_le16(scmd_id(cmd));
1089
writecmd->sector_count = cpu_to_le16(count);
1090
writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1092
writecmd->flags = 0;
1094
aac_build_sg64(cmd, &writecmd->sg);
1095
fibsize = sizeof(struct aac_write64) +
1096
((le32_to_cpu(writecmd->sg.count) - 1) *
1097
sizeof (struct sgentry64));
1098
BUG_ON (fibsize > (fib->dev->max_fib_size -
1099
sizeof(struct aac_fibhdr)));
1101
* Now send the Fib to the adapter
1103
return aac_fib_send(ContainerCommand64,
1108
(fib_callback) io_callback,
1112
static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1115
struct aac_write *writecmd;
1117
writecmd = (struct aac_write *) fib_data(fib);
1118
writecmd->command = cpu_to_le32(VM_CtBlockWrite);
1119
writecmd->cid = cpu_to_le32(scmd_id(cmd));
1120
writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1121
writecmd->count = cpu_to_le32(count * 512);
1122
writecmd->sg.count = cpu_to_le32(1);
1123
/* ->stable is not used - it did mean which type of write */
1125
aac_build_sg(cmd, &writecmd->sg);
1126
fibsize = sizeof(struct aac_write) +
1127
((le32_to_cpu(writecmd->sg.count) - 1) *
1128
sizeof (struct sgentry));
1129
BUG_ON (fibsize > (fib->dev->max_fib_size -
1130
sizeof(struct aac_fibhdr)));
1132
* Now send the Fib to the adapter
1134
return aac_fib_send(ContainerCommand,
1139
(fib_callback) io_callback,
1143
static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd)
1145
struct aac_srb * srbcmd;
1150
switch(cmd->sc_data_direction){
1154
case DMA_BIDIRECTIONAL:
1155
flag = SRB_DataIn | SRB_DataOut;
1157
case DMA_FROM_DEVICE:
1161
default: /* shuts up some versions of gcc */
1162
flag = SRB_NoDataXfer;
1166
srbcmd = (struct aac_srb*) fib_data(fib);
1167
srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
1168
srbcmd->channel = cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd)));
1169
srbcmd->id = cpu_to_le32(scmd_id(cmd));
1170
srbcmd->lun = cpu_to_le32(cmd->device->lun);
1171
srbcmd->flags = cpu_to_le32(flag);
1172
timeout = cmd->request->timeout/HZ;
1175
srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds
1176
srbcmd->retry_limit = 0; /* Obsolete parameter */
1177
srbcmd->cdb_size = cpu_to_le32(cmd->cmd_len);
1181
static void aac_srb_callback(void *context, struct fib * fibptr);
1183
static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
1186
struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1188
aac_build_sg64(cmd, (struct sgmap64*) &srbcmd->sg);
1189
srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1191
memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1192
memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1194
* Build Scatter/Gather list
1196
fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
1197
((le32_to_cpu(srbcmd->sg.count) & 0xff) *
1198
sizeof (struct sgentry64));
1199
BUG_ON (fibsize > (fib->dev->max_fib_size -
1200
sizeof(struct aac_fibhdr)));
1203
* Now send the Fib to the adapter
1205
return aac_fib_send(ScsiPortCommand64, fib,
1206
fibsize, FsaNormal, 0, 1,
1207
(fib_callback) aac_srb_callback,
1211
static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)
1214
struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1216
aac_build_sg(cmd, (struct sgmap*)&srbcmd->sg);
1217
srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1219
memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1220
memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1222
* Build Scatter/Gather list
1224
fibsize = sizeof (struct aac_srb) +
1225
(((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
1226
sizeof (struct sgentry));
1227
BUG_ON (fibsize > (fib->dev->max_fib_size -
1228
sizeof(struct aac_fibhdr)));
1231
* Now send the Fib to the adapter
1233
return aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1,
1234
(fib_callback) aac_srb_callback, (void *) cmd);
1237
static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd)
1239
if ((sizeof(dma_addr_t) > 4) && fib->dev->needs_dac &&
1240
(fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64))
1242
return aac_scsi_32(fib, cmd);
1245
int aac_get_adapter_info(struct aac_dev* dev)
1250
struct aac_adapter_info *info;
1251
struct aac_bus_info *command;
1252
struct aac_bus_info_response *bus_info;
1254
if (!(fibptr = aac_fib_alloc(dev)))
1257
aac_fib_init(fibptr);
1258
info = (struct aac_adapter_info *) fib_data(fibptr);
1259
memset(info,0,sizeof(*info));
1261
rcode = aac_fib_send(RequestAdapterInfo,
1265
-1, 1, /* First `interrupt' command uses special wait */
1270
/* FIB should be freed only after
1271
* getting the response from the F/W */
1272
if (rcode != -ERESTARTSYS) {
1273
aac_fib_complete(fibptr);
1274
aac_fib_free(fibptr);
1278
memcpy(&dev->adapter_info, info, sizeof(*info));
1280
if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) {
1281
struct aac_supplement_adapter_info * sinfo;
1283
aac_fib_init(fibptr);
1285
sinfo = (struct aac_supplement_adapter_info *) fib_data(fibptr);
1287
memset(sinfo,0,sizeof(*sinfo));
1289
rcode = aac_fib_send(RequestSupplementAdapterInfo,
1298
memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo));
1299
if (rcode == -ERESTARTSYS) {
1300
fibptr = aac_fib_alloc(dev);
1312
aac_fib_init(fibptr);
1314
bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
1316
memset(bus_info, 0, sizeof(*bus_info));
1318
command = (struct aac_bus_info *)bus_info;
1320
command->Command = cpu_to_le32(VM_Ioctl);
1321
command->ObjType = cpu_to_le32(FT_DRIVE);
1322
command->MethodId = cpu_to_le32(1);
1323
command->CtlCmd = cpu_to_le32(GetBusInfo);
1325
rcode = aac_fib_send(ContainerCommand,
1332
/* reasoned default */
1333
dev->maximum_num_physicals = 16;
1334
if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) {
1335
dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus);
1336
dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
1339
if (!dev->in_reset) {
1341
tmp = le32_to_cpu(dev->adapter_info.kernelrev);
1342
printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
1348
le32_to_cpu(dev->adapter_info.kernelbuild),
1349
(int)sizeof(dev->supplement_adapter_info.BuildDate),
1350
dev->supplement_adapter_info.BuildDate);
1351
tmp = le32_to_cpu(dev->adapter_info.monitorrev);
1352
printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
1354
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1355
le32_to_cpu(dev->adapter_info.monitorbuild));
1356
tmp = le32_to_cpu(dev->adapter_info.biosrev);
1357
printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
1359
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1360
le32_to_cpu(dev->adapter_info.biosbuild));
1362
if (aac_get_serial_number(
1363
shost_to_class(dev->scsi_host_ptr), buffer))
1364
printk(KERN_INFO "%s%d: serial %s",
1365
dev->name, dev->id, buffer);
1366
if (dev->supplement_adapter_info.VpdInfo.Tsid[0]) {
1367
printk(KERN_INFO "%s%d: TSID %.*s\n",
1369
(int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid),
1370
dev->supplement_adapter_info.VpdInfo.Tsid);
1372
if (!aac_check_reset || ((aac_check_reset == 1) &&
1373
(dev->supplement_adapter_info.SupportedOptions2 &
1374
AAC_OPTION_IGNORE_RESET))) {
1375
printk(KERN_INFO "%s%d: Reset Adapter Ignored\n",
1376
dev->name, dev->id);
1380
dev->cache_protected = 0;
1381
dev->jbod = ((dev->supplement_adapter_info.FeatureBits &
1382
AAC_FEATURE_JBOD) != 0);
1383
dev->nondasd_support = 0;
1384
dev->raid_scsi_mode = 0;
1385
if(dev->adapter_info.options & AAC_OPT_NONDASD)
1386
dev->nondasd_support = 1;
1389
* If the firmware supports ROMB RAID/SCSI mode and we are currently
1390
* in RAID/SCSI mode, set the flag. For now if in this mode we will
1391
* force nondasd support on. If we decide to allow the non-dasd flag
1392
* additional changes changes will have to be made to support
1393
* RAID/SCSI. the function aac_scsi_cmd in this module will have to be
1394
* changed to support the new dev->raid_scsi_mode flag instead of
1395
* leaching off of the dev->nondasd_support flag. Also in linit.c the
1396
* function aac_detect will have to be modified where it sets up the
1397
* max number of channels based on the aac->nondasd_support flag only.
1399
if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) &&
1400
(dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) {
1401
dev->nondasd_support = 1;
1402
dev->raid_scsi_mode = 1;
1404
if (dev->raid_scsi_mode != 0)
1405
printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
1406
dev->name, dev->id);
1409
dev->nondasd_support = (nondasd!=0);
1410
if (dev->nondasd_support && !dev->in_reset)
1411
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
1413
if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
1415
dev->dac_support = 0;
1416
if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
1417
(dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) {
1419
printk(KERN_INFO "%s%d: 64bit support enabled.\n",
1420
dev->name, dev->id);
1421
dev->dac_support = 1;
1425
dev->dac_support = (dacmode!=0);
1428
/* avoid problems with AAC_QUIRK_SCSI_32 controllers */
1429
if (dev->dac_support && (aac_get_driver_ident(dev->cardtype)->quirks
1430
& AAC_QUIRK_SCSI_32)) {
1431
dev->nondasd_support = 0;
1433
expose_physicals = 0;
1436
if(dev->dac_support != 0) {
1437
if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64)) &&
1438
!pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(64))) {
1440
printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
1441
dev->name, dev->id);
1442
} else if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(32)) &&
1443
!pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(32))) {
1444
printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
1445
dev->name, dev->id);
1446
dev->dac_support = 0;
1448
printk(KERN_WARNING"%s%d: No suitable DMA available.\n",
1449
dev->name, dev->id);
1454
* Deal with configuring for the individualized limits of each packet
1457
dev->a_ops.adapter_scsi = (dev->dac_support)
1458
? ((aac_get_driver_ident(dev->cardtype)->quirks & AAC_QUIRK_SCSI_32)
1462
if (dev->raw_io_interface) {
1463
dev->a_ops.adapter_bounds = (dev->raw_io_64)
1466
dev->a_ops.adapter_read = aac_read_raw_io;
1467
dev->a_ops.adapter_write = aac_write_raw_io;
1469
dev->a_ops.adapter_bounds = aac_bounds_32;
1470
dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size -
1471
sizeof(struct aac_fibhdr) -
1472
sizeof(struct aac_write) + sizeof(struct sgentry)) /
1473
sizeof(struct sgentry);
1474
if (dev->dac_support) {
1475
dev->a_ops.adapter_read = aac_read_block64;
1476
dev->a_ops.adapter_write = aac_write_block64;
1478
* 38 scatter gather elements
1480
dev->scsi_host_ptr->sg_tablesize =
1481
(dev->max_fib_size -
1482
sizeof(struct aac_fibhdr) -
1483
sizeof(struct aac_write64) +
1484
sizeof(struct sgentry64)) /
1485
sizeof(struct sgentry64);
1487
dev->a_ops.adapter_read = aac_read_block;
1488
dev->a_ops.adapter_write = aac_write_block;
1490
dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
1491
if (dev->adapter_info.options & AAC_OPT_NEW_COMM_TYPE1)
1492
dev->adapter_info.options |= AAC_OPT_NEW_COMM;
1493
if (!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
1495
* Worst case size that could cause sg overflow when
1496
* we break up SG elements that are larger than 64KB.
1497
* Would be nice if we could tell the SCSI layer what
1498
* the maximum SG element size can be. Worst case is
1499
* (sg_tablesize-1) 4KB elements with one 64KB
1501
* 32bit -> 468 or 238KB 64bit -> 424 or 212KB
1503
dev->scsi_host_ptr->max_sectors =
1504
(dev->scsi_host_ptr->sg_tablesize * 8) + 112;
1507
/* FIB should be freed only after getting the response from the F/W */
1508
if (rcode != -ERESTARTSYS) {
1509
aac_fib_complete(fibptr);
1510
aac_fib_free(fibptr);
1517
static void io_callback(void *context, struct fib * fibptr)
1519
struct aac_dev *dev;
1520
struct aac_read_reply *readreply;
1521
struct scsi_cmnd *scsicmd;
1524
scsicmd = (struct scsi_cmnd *) context;
1526
if (!aac_valid_context(scsicmd, fibptr))
1530
cid = scmd_id(scsicmd);
1532
if (nblank(dprintk(x))) {
1534
switch (scsicmd->cmnd[0]) {
1537
lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
1538
(scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1542
lba = ((u64)scsicmd->cmnd[2] << 56) |
1543
((u64)scsicmd->cmnd[3] << 48) |
1544
((u64)scsicmd->cmnd[4] << 40) |
1545
((u64)scsicmd->cmnd[5] << 32) |
1546
((u64)scsicmd->cmnd[6] << 24) |
1547
(scsicmd->cmnd[7] << 16) |
1548
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1552
lba = ((u64)scsicmd->cmnd[2] << 24) |
1553
(scsicmd->cmnd[3] << 16) |
1554
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1557
lba = ((u64)scsicmd->cmnd[2] << 24) |
1558
(scsicmd->cmnd[3] << 16) |
1559
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1563
"io_callback[cpu %d]: lba = %llu, t = %ld.\n",
1564
smp_processor_id(), (unsigned long long)lba, jiffies);
1567
BUG_ON(fibptr == NULL);
1569
scsi_dma_unmap(scsicmd);
1571
readreply = (struct aac_read_reply *)fib_data(fibptr);
1572
switch (le32_to_cpu(readreply->status)) {
1574
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1576
dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
1579
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1580
SAM_STAT_CHECK_CONDITION;
1581
set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
1582
SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
1583
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1584
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1585
SCSI_SENSE_BUFFERSIZE));
1588
#ifdef AAC_DETAILED_STATUS_INFO
1589
printk(KERN_WARNING "io_callback: io failed, status = %d\n",
1590
le32_to_cpu(readreply->status));
1592
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1593
SAM_STAT_CHECK_CONDITION;
1594
set_sense(&dev->fsa_dev[cid].sense_data,
1595
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1596
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1597
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1598
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1599
SCSI_SENSE_BUFFERSIZE));
1602
aac_fib_complete(fibptr);
1603
aac_fib_free(fibptr);
1605
scsicmd->scsi_done(scsicmd);
1608
static int aac_read(struct scsi_cmnd * scsicmd)
1613
struct aac_dev *dev;
1614
struct fib * cmd_fibcontext;
1617
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1619
* Get block address and transfer length
1621
switch (scsicmd->cmnd[0]) {
1623
dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd)));
1625
lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
1626
(scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1627
count = scsicmd->cmnd[4];
1633
dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd)));
1635
lba = ((u64)scsicmd->cmnd[2] << 56) |
1636
((u64)scsicmd->cmnd[3] << 48) |
1637
((u64)scsicmd->cmnd[4] << 40) |
1638
((u64)scsicmd->cmnd[5] << 32) |
1639
((u64)scsicmd->cmnd[6] << 24) |
1640
(scsicmd->cmnd[7] << 16) |
1641
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1642
count = (scsicmd->cmnd[10] << 24) |
1643
(scsicmd->cmnd[11] << 16) |
1644
(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
1647
dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd)));
1649
lba = ((u64)scsicmd->cmnd[2] << 24) |
1650
(scsicmd->cmnd[3] << 16) |
1651
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1652
count = (scsicmd->cmnd[6] << 24) |
1653
(scsicmd->cmnd[7] << 16) |
1654
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1657
dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd)));
1659
lba = ((u64)scsicmd->cmnd[2] << 24) |
1660
(scsicmd->cmnd[3] << 16) |
1661
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1662
count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
1666
if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
1667
cid = scmd_id(scsicmd);
1668
dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
1669
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1670
SAM_STAT_CHECK_CONDITION;
1671
set_sense(&dev->fsa_dev[cid].sense_data,
1672
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1673
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1674
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1675
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1676
SCSI_SENSE_BUFFERSIZE));
1677
scsicmd->scsi_done(scsicmd);
1681
dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
1682
smp_processor_id(), (unsigned long long)lba, jiffies));
1683
if (aac_adapter_bounds(dev,scsicmd,lba))
1686
* Alocate and initialize a Fib
1688
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
1689
printk(KERN_WARNING "aac_read: fib allocation failed\n");
1693
status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
1696
* Check that the command queued to the controller
1698
if (status == -EINPROGRESS) {
1699
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1703
printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status);
1705
* For some reason, the Fib didn't queue, return QUEUE_FULL
1707
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
1708
scsicmd->scsi_done(scsicmd);
1709
aac_fib_complete(cmd_fibcontext);
1710
aac_fib_free(cmd_fibcontext);
1714
static int aac_write(struct scsi_cmnd * scsicmd)
1720
struct aac_dev *dev;
1721
struct fib * cmd_fibcontext;
1724
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1726
* Get block address and transfer length
1728
if (scsicmd->cmnd[0] == WRITE_6) /* 6 byte command */
1730
lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1731
count = scsicmd->cmnd[4];
1735
} else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */
1736
dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd)));
1738
lba = ((u64)scsicmd->cmnd[2] << 56) |
1739
((u64)scsicmd->cmnd[3] << 48) |
1740
((u64)scsicmd->cmnd[4] << 40) |
1741
((u64)scsicmd->cmnd[5] << 32) |
1742
((u64)scsicmd->cmnd[6] << 24) |
1743
(scsicmd->cmnd[7] << 16) |
1744
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1745
count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) |
1746
(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
1747
fua = scsicmd->cmnd[1] & 0x8;
1748
} else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */
1749
dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd)));
1751
lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16)
1752
| (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1753
count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16)
1754
| (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1755
fua = scsicmd->cmnd[1] & 0x8;
1757
dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd)));
1758
lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1759
count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
1760
fua = scsicmd->cmnd[1] & 0x8;
1763
if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
1764
cid = scmd_id(scsicmd);
1765
dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
1766
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1767
SAM_STAT_CHECK_CONDITION;
1768
set_sense(&dev->fsa_dev[cid].sense_data,
1769
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1770
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1771
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1772
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1773
SCSI_SENSE_BUFFERSIZE));
1774
scsicmd->scsi_done(scsicmd);
1778
dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
1779
smp_processor_id(), (unsigned long long)lba, jiffies));
1780
if (aac_adapter_bounds(dev,scsicmd,lba))
1783
* Allocate and initialize a Fib then setup a BlockWrite command
1785
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
1786
/* FIB temporarily unavailable,not catastrophic failure */
1788
/* scsicmd->result = DID_ERROR << 16;
1789
* scsicmd->scsi_done(scsicmd);
1792
printk(KERN_WARNING "aac_write: fib allocation failed\n");
1796
status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
1799
* Check that the command queued to the controller
1801
if (status == -EINPROGRESS) {
1802
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1806
printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status);
1808
* For some reason, the Fib didn't queue, return QUEUE_FULL
1810
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
1811
scsicmd->scsi_done(scsicmd);
1813
aac_fib_complete(cmd_fibcontext);
1814
aac_fib_free(cmd_fibcontext);
1818
static void synchronize_callback(void *context, struct fib *fibptr)
1820
struct aac_synchronize_reply *synchronizereply;
1821
struct scsi_cmnd *cmd;
1825
if (!aac_valid_context(cmd, fibptr))
1828
dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n",
1829
smp_processor_id(), jiffies));
1830
BUG_ON(fibptr == NULL);
1833
synchronizereply = fib_data(fibptr);
1834
if (le32_to_cpu(synchronizereply->status) == CT_OK)
1835
cmd->result = DID_OK << 16 |
1836
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1838
struct scsi_device *sdev = cmd->device;
1839
struct aac_dev *dev = fibptr->dev;
1840
u32 cid = sdev_id(sdev);
1842
"synchronize_callback: synchronize failed, status = %d\n",
1843
le32_to_cpu(synchronizereply->status));
1844
cmd->result = DID_OK << 16 |
1845
COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
1846
set_sense(&dev->fsa_dev[cid].sense_data,
1847
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1848
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1849
memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1850
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1851
SCSI_SENSE_BUFFERSIZE));
1854
aac_fib_complete(fibptr);
1855
aac_fib_free(fibptr);
1856
cmd->scsi_done(cmd);
1859
static int aac_synchronize(struct scsi_cmnd *scsicmd)
1862
struct fib *cmd_fibcontext;
1863
struct aac_synchronize *synchronizecmd;
1864
struct scsi_cmnd *cmd;
1865
struct scsi_device *sdev = scsicmd->device;
1867
struct aac_dev *aac;
1868
u64 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) |
1869
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1870
u32 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
1871
unsigned long flags;
1874
* Wait for all outstanding queued commands to complete to this
1875
* specific target (block).
1877
spin_lock_irqsave(&sdev->list_lock, flags);
1878
list_for_each_entry(cmd, &sdev->cmd_list, list)
1879
if (cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
1883
if (cmd->cmnd[0] == WRITE_6) {
1884
cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) |
1885
(cmd->cmnd[2] << 8) |
1887
cmnd_count = cmd->cmnd[4];
1888
if (cmnd_count == 0)
1890
} else if (cmd->cmnd[0] == WRITE_16) {
1891
cmnd_lba = ((u64)cmd->cmnd[2] << 56) |
1892
((u64)cmd->cmnd[3] << 48) |
1893
((u64)cmd->cmnd[4] << 40) |
1894
((u64)cmd->cmnd[5] << 32) |
1895
((u64)cmd->cmnd[6] << 24) |
1896
(cmd->cmnd[7] << 16) |
1897
(cmd->cmnd[8] << 8) |
1899
cmnd_count = (cmd->cmnd[10] << 24) |
1900
(cmd->cmnd[11] << 16) |
1901
(cmd->cmnd[12] << 8) |
1903
} else if (cmd->cmnd[0] == WRITE_12) {
1904
cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
1905
(cmd->cmnd[3] << 16) |
1906
(cmd->cmnd[4] << 8) |
1908
cmnd_count = (cmd->cmnd[6] << 24) |
1909
(cmd->cmnd[7] << 16) |
1910
(cmd->cmnd[8] << 8) |
1912
} else if (cmd->cmnd[0] == WRITE_10) {
1913
cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
1914
(cmd->cmnd[3] << 16) |
1915
(cmd->cmnd[4] << 8) |
1917
cmnd_count = (cmd->cmnd[7] << 8) |
1921
if (((cmnd_lba + cmnd_count) < lba) ||
1922
(count && ((lba + count) < cmnd_lba)))
1928
spin_unlock_irqrestore(&sdev->list_lock, flags);
1931
* Yield the processor (requeue for later)
1934
return SCSI_MLQUEUE_DEVICE_BUSY;
1936
aac = (struct aac_dev *)sdev->host->hostdata;
1938
return SCSI_MLQUEUE_HOST_BUSY;
1941
* Allocate and initialize a Fib
1943
if (!(cmd_fibcontext = aac_fib_alloc(aac)))
1944
return SCSI_MLQUEUE_HOST_BUSY;
1946
aac_fib_init(cmd_fibcontext);
1948
synchronizecmd = fib_data(cmd_fibcontext);
1949
synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
1950
synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
1951
synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd));
1952
synchronizecmd->count =
1953
cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
1956
* Now send the Fib to the adapter
1958
status = aac_fib_send(ContainerCommand,
1960
sizeof(struct aac_synchronize),
1963
(fib_callback)synchronize_callback,
1967
* Check that the command queued to the controller
1969
if (status == -EINPROGRESS) {
1970
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1975
"aac_synchronize: aac_fib_send failed with status: %d.\n", status);
1976
aac_fib_complete(cmd_fibcontext);
1977
aac_fib_free(cmd_fibcontext);
1978
return SCSI_MLQUEUE_HOST_BUSY;
1981
static void aac_start_stop_callback(void *context, struct fib *fibptr)
1983
struct scsi_cmnd *scsicmd = context;
1985
if (!aac_valid_context(scsicmd, fibptr))
1988
BUG_ON(fibptr == NULL);
1990
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1992
aac_fib_complete(fibptr);
1993
aac_fib_free(fibptr);
1994
scsicmd->scsi_done(scsicmd);
1997
static int aac_start_stop(struct scsi_cmnd *scsicmd)
2000
struct fib *cmd_fibcontext;
2001
struct aac_power_management *pmcmd;
2002
struct scsi_device *sdev = scsicmd->device;
2003
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
2005
if (!(aac->supplement_adapter_info.SupportedOptions2 &
2006
AAC_OPTION_POWER_MANAGEMENT)) {
2007
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2009
scsicmd->scsi_done(scsicmd);
2014
return SCSI_MLQUEUE_HOST_BUSY;
2017
* Allocate and initialize a Fib
2019
cmd_fibcontext = aac_fib_alloc(aac);
2020
if (!cmd_fibcontext)
2021
return SCSI_MLQUEUE_HOST_BUSY;
2023
aac_fib_init(cmd_fibcontext);
2025
pmcmd = fib_data(cmd_fibcontext);
2026
pmcmd->command = cpu_to_le32(VM_ContainerConfig);
2027
pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
2028
/* Eject bit ignored, not relevant */
2029
pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
2030
cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
2031
pmcmd->cid = cpu_to_le32(sdev_id(sdev));
2032
pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
2033
cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
2036
* Now send the Fib to the adapter
2038
status = aac_fib_send(ContainerCommand,
2040
sizeof(struct aac_power_management),
2043
(fib_callback)aac_start_stop_callback,
2047
* Check that the command queued to the controller
2049
if (status == -EINPROGRESS) {
2050
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2054
aac_fib_complete(cmd_fibcontext);
2055
aac_fib_free(cmd_fibcontext);
2056
return SCSI_MLQUEUE_HOST_BUSY;
2060
* aac_scsi_cmd() - Process SCSI command
2061
* @scsicmd: SCSI command block
2063
* Emulate a SCSI command and queue the required request for the
2067
int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
2070
struct Scsi_Host *host = scsicmd->device->host;
2071
struct aac_dev *dev = (struct aac_dev *)host->hostdata;
2072
struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
2074
if (fsa_dev_ptr == NULL)
2077
* If the bus, id or lun is out of range, return fail
2078
* Test does not apply to ID 16, the pseudo id for the controller
2081
cid = scmd_id(scsicmd);
2082
if (cid != host->this_id) {
2083
if (scmd_channel(scsicmd) == CONTAINER_CHANNEL) {
2084
if((cid >= dev->maximum_num_containers) ||
2085
(scsicmd->device->lun != 0)) {
2086
scsicmd->result = DID_NO_CONNECT << 16;
2087
scsicmd->scsi_done(scsicmd);
2092
* If the target container doesn't exist, it may have
2093
* been newly created
2095
if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
2096
(fsa_dev_ptr[cid].sense_data.sense_key ==
2098
switch (scsicmd->cmnd[0]) {
2099
case SERVICE_ACTION_IN:
2100
if (!(dev->raw_io_interface) ||
2101
!(dev->raw_io_64) ||
2102
((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
2106
case TEST_UNIT_READY:
2109
return _aac_probe_container(scsicmd,
2110
aac_probe_container_callback2);
2115
} else { /* check for physical non-dasd devices */
2116
if (dev->nondasd_support || expose_physicals ||
2120
return aac_send_srb_fib(scsicmd);
2122
scsicmd->result = DID_NO_CONNECT << 16;
2123
scsicmd->scsi_done(scsicmd);
2129
* else Command for the controller itself
2131
else if ((scsicmd->cmnd[0] != INQUIRY) && /* only INQUIRY & TUR cmnd supported for controller */
2132
(scsicmd->cmnd[0] != TEST_UNIT_READY))
2134
dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0]));
2135
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2136
set_sense(&dev->fsa_dev[cid].sense_data,
2137
ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
2138
ASENCODE_INVALID_COMMAND, 0, 0);
2139
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2140
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2141
SCSI_SENSE_BUFFERSIZE));
2142
scsicmd->scsi_done(scsicmd);
2147
/* Handle commands here that don't really require going out to the adapter */
2148
switch (scsicmd->cmnd[0]) {
2151
struct inquiry_data inq_data;
2153
dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid));
2154
memset(&inq_data, 0, sizeof (struct inquiry_data));
2156
if ((scsicmd->cmnd[1] & 0x1) && aac_wwn) {
2157
char *arr = (char *)&inq_data;
2160
arr[0] = (scmd_id(scsicmd) == host->this_id) ?
2161
INQD_PDT_PROC : INQD_PDT_DA;
2162
if (scsicmd->cmnd[2] == 0) {
2163
/* supported vital product data pages */
2167
arr[1] = scsicmd->cmnd[2];
2168
scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2170
scsicmd->result = DID_OK << 16 |
2171
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2172
} else if (scsicmd->cmnd[2] == 0x80) {
2173
/* unit serial number page */
2174
arr[3] = setinqserial(dev, &arr[4],
2176
arr[1] = scsicmd->cmnd[2];
2177
scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2180
return aac_get_container_serial(
2182
/* SLES 10 SP1 special */
2183
scsicmd->result = DID_OK << 16 |
2184
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2186
/* vpd page not implemented */
2187
scsicmd->result = DID_OK << 16 |
2188
COMMAND_COMPLETE << 8 |
2189
SAM_STAT_CHECK_CONDITION;
2190
set_sense(&dev->fsa_dev[cid].sense_data,
2191
ILLEGAL_REQUEST, SENCODE_INVALID_CDB_FIELD,
2192
ASENCODE_NO_SENSE, 7, 2);
2193
memcpy(scsicmd->sense_buffer,
2194
&dev->fsa_dev[cid].sense_data,
2196
sizeof(dev->fsa_dev[cid].sense_data),
2197
SCSI_SENSE_BUFFERSIZE));
2199
scsicmd->scsi_done(scsicmd);
2202
inq_data.inqd_ver = 2; /* claim compliance to SCSI-2 */
2203
inq_data.inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2204
inq_data.inqd_len = 31;
2205
/*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
2206
inq_data.inqd_pad2= 0x32 ; /*WBus16|Sync|CmdQue */
2208
* Set the Vendor, Product, and Revision Level
2209
* see: <vendor>.c i.e. aac.c
2211
if (cid == host->this_id) {
2212
setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types));
2213
inq_data.inqd_pdt = INQD_PDT_PROC; /* Processor device */
2214
scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2216
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2217
scsicmd->scsi_done(scsicmd);
2222
setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
2223
inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
2224
scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
2225
return aac_get_container_name(scsicmd);
2227
case SERVICE_ACTION_IN:
2228
if (!(dev->raw_io_interface) ||
2229
!(dev->raw_io_64) ||
2230
((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
2235
unsigned int alloc_len;
2237
dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n"));
2238
capacity = fsa_dev_ptr[cid].size - 1;
2239
cp[0] = (capacity >> 56) & 0xff;
2240
cp[1] = (capacity >> 48) & 0xff;
2241
cp[2] = (capacity >> 40) & 0xff;
2242
cp[3] = (capacity >> 32) & 0xff;
2243
cp[4] = (capacity >> 24) & 0xff;
2244
cp[5] = (capacity >> 16) & 0xff;
2245
cp[6] = (capacity >> 8) & 0xff;
2246
cp[7] = (capacity >> 0) & 0xff;
2253
alloc_len = ((scsicmd->cmnd[10] << 24)
2254
+ (scsicmd->cmnd[11] << 16)
2255
+ (scsicmd->cmnd[12] << 8) + scsicmd->cmnd[13]);
2257
alloc_len = min_t(size_t, alloc_len, sizeof(cp));
2258
scsi_sg_copy_from_buffer(scsicmd, cp, alloc_len);
2259
if (alloc_len < scsi_bufflen(scsicmd))
2260
scsi_set_resid(scsicmd,
2261
scsi_bufflen(scsicmd) - alloc_len);
2263
/* Do not cache partition table for arrays */
2264
scsicmd->device->removable = 1;
2266
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2267
scsicmd->scsi_done(scsicmd);
2277
dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
2278
if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
2279
capacity = fsa_dev_ptr[cid].size - 1;
2283
cp[0] = (capacity >> 24) & 0xff;
2284
cp[1] = (capacity >> 16) & 0xff;
2285
cp[2] = (capacity >> 8) & 0xff;
2286
cp[3] = (capacity >> 0) & 0xff;
2291
scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
2292
/* Do not cache partition table for arrays */
2293
scsicmd->device->removable = 1;
2294
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2296
scsicmd->scsi_done(scsicmd);
2304
int mode_buf_length = 4;
2306
dprintk((KERN_DEBUG "MODE SENSE command.\n"));
2307
mode_buf[0] = 3; /* Mode data length */
2308
mode_buf[1] = 0; /* Medium type - default */
2309
mode_buf[2] = 0; /* Device-specific param,
2310
bit 8: 0/1 = write enabled/protected
2311
bit 4: 0/1 = FUA enabled */
2312
if (dev->raw_io_interface && ((aac_cache & 5) != 1))
2314
mode_buf[3] = 0; /* Block descriptor length */
2315
if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
2316
((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
2320
mode_buf[6] = ((aac_cache & 6) == 2)
2321
? 0 : 0x04; /* WCE */
2322
mode_buf_length = 7;
2323
if (mode_buf_length > scsicmd->cmnd[4])
2324
mode_buf_length = scsicmd->cmnd[4];
2326
scsi_sg_copy_from_buffer(scsicmd, mode_buf, mode_buf_length);
2327
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2328
scsicmd->scsi_done(scsicmd);
2335
int mode_buf_length = 8;
2337
dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
2338
mode_buf[0] = 0; /* Mode data length (MSB) */
2339
mode_buf[1] = 6; /* Mode data length (LSB) */
2340
mode_buf[2] = 0; /* Medium type - default */
2341
mode_buf[3] = 0; /* Device-specific param,
2342
bit 8: 0/1 = write enabled/protected
2343
bit 4: 0/1 = FUA enabled */
2344
if (dev->raw_io_interface && ((aac_cache & 5) != 1))
2346
mode_buf[4] = 0; /* reserved */
2347
mode_buf[5] = 0; /* reserved */
2348
mode_buf[6] = 0; /* Block descriptor length (MSB) */
2349
mode_buf[7] = 0; /* Block descriptor length (LSB) */
2350
if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
2351
((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
2355
mode_buf[10] = ((aac_cache & 6) == 2)
2356
? 0 : 0x04; /* WCE */
2357
mode_buf_length = 11;
2358
if (mode_buf_length > scsicmd->cmnd[8])
2359
mode_buf_length = scsicmd->cmnd[8];
2361
scsi_sg_copy_from_buffer(scsicmd, mode_buf, mode_buf_length);
2363
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2364
scsicmd->scsi_done(scsicmd);
2369
dprintk((KERN_DEBUG "REQUEST SENSE command.\n"));
2370
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data));
2371
memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data));
2372
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2373
scsicmd->scsi_done(scsicmd);
2376
case ALLOW_MEDIUM_REMOVAL:
2377
dprintk((KERN_DEBUG "LOCK command.\n"));
2378
if (scsicmd->cmnd[4])
2379
fsa_dev_ptr[cid].locked = 1;
2381
fsa_dev_ptr[cid].locked = 0;
2383
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2384
scsicmd->scsi_done(scsicmd);
2387
* These commands are all No-Ops
2389
case TEST_UNIT_READY:
2390
if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
2391
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2392
SAM_STAT_CHECK_CONDITION;
2393
set_sense(&dev->fsa_dev[cid].sense_data,
2394
NOT_READY, SENCODE_BECOMING_READY,
2395
ASENCODE_BECOMING_READY, 0, 0);
2396
memcpy(scsicmd->sense_buffer,
2397
&dev->fsa_dev[cid].sense_data,
2399
sizeof(dev->fsa_dev[cid].sense_data),
2400
SCSI_SENSE_BUFFERSIZE));
2401
scsicmd->scsi_done(scsicmd);
2408
case REASSIGN_BLOCKS:
2410
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2411
scsicmd->scsi_done(scsicmd);
2415
return aac_start_stop(scsicmd);
2418
switch (scsicmd->cmnd[0])
2427
* Hack to keep track of ordinal number of the device that
2428
* corresponds to a container. Needed to convert
2429
* containers to /dev/sd device names
2432
if (scsicmd->request->rq_disk)
2433
strlcpy(fsa_dev_ptr[cid].devname,
2434
scsicmd->request->rq_disk->disk_name,
2435
min(sizeof(fsa_dev_ptr[cid].devname),
2436
sizeof(scsicmd->request->rq_disk->disk_name) + 1));
2438
return aac_read(scsicmd);
2446
return aac_write(scsicmd);
2448
case SYNCHRONIZE_CACHE:
2449
if (((aac_cache & 6) == 6) && dev->cache_protected) {
2450
scsicmd->result = DID_OK << 16 |
2451
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2452
scsicmd->scsi_done(scsicmd);
2455
/* Issue FIB to tell Firmware to flush it's cache */
2456
if ((aac_cache & 6) != 2)
2457
return aac_synchronize(scsicmd);
2461
* Unhandled commands
2463
dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]));
2464
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2465
set_sense(&dev->fsa_dev[cid].sense_data,
2466
ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
2467
ASENCODE_INVALID_COMMAND, 0, 0);
2468
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2470
sizeof(dev->fsa_dev[cid].sense_data),
2471
SCSI_SENSE_BUFFERSIZE));
2472
scsicmd->scsi_done(scsicmd);
2477
static int query_disk(struct aac_dev *dev, void __user *arg)
2479
struct aac_query_disk qd;
2480
struct fsa_dev_info *fsa_dev_ptr;
2482
fsa_dev_ptr = dev->fsa_dev;
2485
if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk)))
2489
else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1))
2491
if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers)
2493
qd.instance = dev->scsi_host_ptr->host_no;
2495
qd.id = CONTAINER_TO_ID(qd.cnum);
2496
qd.lun = CONTAINER_TO_LUN(qd.cnum);
2498
else return -EINVAL;
2500
qd.valid = fsa_dev_ptr[qd.cnum].valid != 0;
2501
qd.locked = fsa_dev_ptr[qd.cnum].locked;
2502
qd.deleted = fsa_dev_ptr[qd.cnum].deleted;
2504
if (fsa_dev_ptr[qd.cnum].devname[0] == '\0')
2509
strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname,
2510
min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1));
2512
if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk)))
2517
static int force_delete_disk(struct aac_dev *dev, void __user *arg)
2519
struct aac_delete_disk dd;
2520
struct fsa_dev_info *fsa_dev_ptr;
2522
fsa_dev_ptr = dev->fsa_dev;
2526
if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
2529
if (dd.cnum >= dev->maximum_num_containers)
2532
* Mark this container as being deleted.
2534
fsa_dev_ptr[dd.cnum].deleted = 1;
2536
* Mark the container as no longer valid
2538
fsa_dev_ptr[dd.cnum].valid = 0;
2542
static int delete_disk(struct aac_dev *dev, void __user *arg)
2544
struct aac_delete_disk dd;
2545
struct fsa_dev_info *fsa_dev_ptr;
2547
fsa_dev_ptr = dev->fsa_dev;
2551
if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
2554
if (dd.cnum >= dev->maximum_num_containers)
2557
* If the container is locked, it can not be deleted by the API.
2559
if (fsa_dev_ptr[dd.cnum].locked)
2563
* Mark the container as no longer being valid.
2565
fsa_dev_ptr[dd.cnum].valid = 0;
2566
fsa_dev_ptr[dd.cnum].devname[0] = '\0';
2571
int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg)
2574
case FSACTL_QUERY_DISK:
2575
return query_disk(dev, arg);
2576
case FSACTL_DELETE_DISK:
2577
return delete_disk(dev, arg);
2578
case FSACTL_FORCE_DELETE_DISK:
2579
return force_delete_disk(dev, arg);
2580
case FSACTL_GET_CONTAINERS:
2581
return aac_get_containers(dev);
2590
* @context: the context set in the fib - here it is scsi cmd
2591
* @fibptr: pointer to the fib
2593
* Handles the completion of a scsi command to a non dasd device
2597
static void aac_srb_callback(void *context, struct fib * fibptr)
2599
struct aac_dev *dev;
2600
struct aac_srb_reply *srbreply;
2601
struct scsi_cmnd *scsicmd;
2603
scsicmd = (struct scsi_cmnd *) context;
2605
if (!aac_valid_context(scsicmd, fibptr))
2608
BUG_ON(fibptr == NULL);
2612
srbreply = (struct aac_srb_reply *) fib_data(fibptr);
2614
scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */
2616
* Calculate resid for sg
2619
scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
2620
- le32_to_cpu(srbreply->data_xfer_length));
2622
scsi_dma_unmap(scsicmd);
2624
/* expose physical device if expose_physicald flag is on */
2625
if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
2626
&& expose_physicals > 0)
2627
aac_expose_phy_device(scsicmd);
2630
* First check the fib status
2633
if (le32_to_cpu(srbreply->status) != ST_OK){
2635
printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
2636
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
2637
SCSI_SENSE_BUFFERSIZE);
2638
scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2639
memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
2643
* Next check the srb status
2645
switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
2646
case SRB_STATUS_ERROR_RECOVERY:
2647
case SRB_STATUS_PENDING:
2648
case SRB_STATUS_SUCCESS:
2649
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
2651
case SRB_STATUS_DATA_OVERRUN:
2652
switch(scsicmd->cmnd[0]){
2661
if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
2662
printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
2664
printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
2666
scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
2669
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
2673
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
2677
case SRB_STATUS_ABORTED:
2678
scsicmd->result = DID_ABORT << 16 | ABORT << 8;
2680
case SRB_STATUS_ABORT_FAILED:
2681
// Not sure about this one - but assuming the hba was trying to abort for some reason
2682
scsicmd->result = DID_ERROR << 16 | ABORT << 8;
2684
case SRB_STATUS_PARITY_ERROR:
2685
scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
2687
case SRB_STATUS_NO_DEVICE:
2688
case SRB_STATUS_INVALID_PATH_ID:
2689
case SRB_STATUS_INVALID_TARGET_ID:
2690
case SRB_STATUS_INVALID_LUN:
2691
case SRB_STATUS_SELECTION_TIMEOUT:
2692
scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
2695
case SRB_STATUS_COMMAND_TIMEOUT:
2696
case SRB_STATUS_TIMEOUT:
2697
scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
2700
case SRB_STATUS_BUSY:
2701
scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
2704
case SRB_STATUS_BUS_RESET:
2705
scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
2708
case SRB_STATUS_MESSAGE_REJECTED:
2709
scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
2711
case SRB_STATUS_REQUEST_FLUSHED:
2712
case SRB_STATUS_ERROR:
2713
case SRB_STATUS_INVALID_REQUEST:
2714
case SRB_STATUS_REQUEST_SENSE_FAILED:
2715
case SRB_STATUS_NO_HBA:
2716
case SRB_STATUS_UNEXPECTED_BUS_FREE:
2717
case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
2718
case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
2719
case SRB_STATUS_DELAYED_RETRY:
2720
case SRB_STATUS_BAD_FUNCTION:
2721
case SRB_STATUS_NOT_STARTED:
2722
case SRB_STATUS_NOT_IN_USE:
2723
case SRB_STATUS_FORCE_ABORT:
2724
case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
2726
#ifdef AAC_DETAILED_STATUS_INFO
2727
printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
2728
le32_to_cpu(srbreply->srb_status) & 0x3F,
2729
aac_get_status_string(
2730
le32_to_cpu(srbreply->srb_status) & 0x3F),
2732
le32_to_cpu(srbreply->scsi_status));
2734
if ((scsicmd->cmnd[0] == ATA_12)
2735
|| (scsicmd->cmnd[0] == ATA_16)) {
2736
if (scsicmd->cmnd[2] & (0x01 << 5)) {
2737
scsicmd->result = DID_OK << 16
2738
| COMMAND_COMPLETE << 8;
2741
scsicmd->result = DID_ERROR << 16
2742
| COMMAND_COMPLETE << 8;
2746
scsicmd->result = DID_ERROR << 16
2747
| COMMAND_COMPLETE << 8;
2751
if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
2753
scsicmd->result |= SAM_STAT_CHECK_CONDITION;
2754
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
2755
SCSI_SENSE_BUFFERSIZE);
2756
#ifdef AAC_DETAILED_STATUS_INFO
2757
printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
2758
le32_to_cpu(srbreply->status), len);
2760
memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
2763
* OR in the scsi status (already shifted up a bit)
2765
scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
2767
aac_fib_complete(fibptr);
2768
aac_fib_free(fibptr);
2769
scsicmd->scsi_done(scsicmd);
2775
* @scsicmd: the scsi command block
2777
* This routine will form a FIB and fill in the aac_srb from the
2778
* scsicmd passed in.
2781
static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
2783
struct fib* cmd_fibcontext;
2784
struct aac_dev* dev;
2787
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2788
if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
2789
scsicmd->device->lun > 7) {
2790
scsicmd->result = DID_NO_CONNECT << 16;
2791
scsicmd->scsi_done(scsicmd);
2796
* Allocate and initialize a Fib then setup a BlockWrite command
2798
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
2801
status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
2804
* Check that the command queued to the controller
2806
if (status == -EINPROGRESS) {
2807
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2811
printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status);
2812
aac_fib_complete(cmd_fibcontext);
2813
aac_fib_free(cmd_fibcontext);
2818
static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg)
2820
struct aac_dev *dev;
2821
unsigned long byte_count = 0;
2824
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2825
// Get rid of old data
2827
psg->sg[0].addr = 0;
2828
psg->sg[0].count = 0;
2830
nseg = scsi_dma_map(scsicmd);
2833
struct scatterlist *sg;
2836
psg->count = cpu_to_le32(nseg);
2838
scsi_for_each_sg(scsicmd, sg, nseg, i) {
2839
psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
2840
psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
2841
byte_count += sg_dma_len(sg);
2843
/* hba wants the size to be exact */
2844
if (byte_count > scsi_bufflen(scsicmd)) {
2845
u32 temp = le32_to_cpu(psg->sg[i-1].count) -
2846
(byte_count - scsi_bufflen(scsicmd));
2847
psg->sg[i-1].count = cpu_to_le32(temp);
2848
byte_count = scsi_bufflen(scsicmd);
2850
/* Check for command underflow */
2851
if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
2852
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
2853
byte_count, scsicmd->underflow);
2860
static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg)
2862
struct aac_dev *dev;
2863
unsigned long byte_count = 0;
2867
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
2868
// Get rid of old data
2870
psg->sg[0].addr[0] = 0;
2871
psg->sg[0].addr[1] = 0;
2872
psg->sg[0].count = 0;
2874
nseg = scsi_dma_map(scsicmd);
2877
struct scatterlist *sg;
2880
scsi_for_each_sg(scsicmd, sg, nseg, i) {
2881
int count = sg_dma_len(sg);
2882
addr = sg_dma_address(sg);
2883
psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
2884
psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
2885
psg->sg[i].count = cpu_to_le32(count);
2886
byte_count += count;
2888
psg->count = cpu_to_le32(nseg);
2889
/* hba wants the size to be exact */
2890
if (byte_count > scsi_bufflen(scsicmd)) {
2891
u32 temp = le32_to_cpu(psg->sg[i-1].count) -
2892
(byte_count - scsi_bufflen(scsicmd));
2893
psg->sg[i-1].count = cpu_to_le32(temp);
2894
byte_count = scsi_bufflen(scsicmd);
2896
/* Check for command underflow */
2897
if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
2898
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
2899
byte_count, scsicmd->underflow);
2905
static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg)
2907
unsigned long byte_count = 0;
2910
// Get rid of old data
2912
psg->sg[0].next = 0;
2913
psg->sg[0].prev = 0;
2914
psg->sg[0].addr[0] = 0;
2915
psg->sg[0].addr[1] = 0;
2916
psg->sg[0].count = 0;
2917
psg->sg[0].flags = 0;
2919
nseg = scsi_dma_map(scsicmd);
2922
struct scatterlist *sg;
2925
scsi_for_each_sg(scsicmd, sg, nseg, i) {
2926
int count = sg_dma_len(sg);
2927
u64 addr = sg_dma_address(sg);
2928
psg->sg[i].next = 0;
2929
psg->sg[i].prev = 0;
2930
psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32));
2931
psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
2932
psg->sg[i].count = cpu_to_le32(count);
2933
psg->sg[i].flags = 0;
2934
byte_count += count;
2936
psg->count = cpu_to_le32(nseg);
2937
/* hba wants the size to be exact */
2938
if (byte_count > scsi_bufflen(scsicmd)) {
2939
u32 temp = le32_to_cpu(psg->sg[i-1].count) -
2940
(byte_count - scsi_bufflen(scsicmd));
2941
psg->sg[i-1].count = cpu_to_le32(temp);
2942
byte_count = scsi_bufflen(scsicmd);
2944
/* Check for command underflow */
2945
if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
2946
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
2947
byte_count, scsicmd->underflow);
2953
#ifdef AAC_DETAILED_STATUS_INFO
2955
struct aac_srb_status_info {
2961
static struct aac_srb_status_info srb_status_info[] = {
2962
{ SRB_STATUS_PENDING, "Pending Status"},
2963
{ SRB_STATUS_SUCCESS, "Success"},
2964
{ SRB_STATUS_ABORTED, "Aborted Command"},
2965
{ SRB_STATUS_ABORT_FAILED, "Abort Failed"},
2966
{ SRB_STATUS_ERROR, "Error Event"},
2967
{ SRB_STATUS_BUSY, "Device Busy"},
2968
{ SRB_STATUS_INVALID_REQUEST, "Invalid Request"},
2969
{ SRB_STATUS_INVALID_PATH_ID, "Invalid Path ID"},
2970
{ SRB_STATUS_NO_DEVICE, "No Device"},
2971
{ SRB_STATUS_TIMEOUT, "Timeout"},
2972
{ SRB_STATUS_SELECTION_TIMEOUT, "Selection Timeout"},
2973
{ SRB_STATUS_COMMAND_TIMEOUT, "Command Timeout"},
2974
{ SRB_STATUS_MESSAGE_REJECTED, "Message Rejected"},
2975
{ SRB_STATUS_BUS_RESET, "Bus Reset"},
2976
{ SRB_STATUS_PARITY_ERROR, "Parity Error"},
2977
{ SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"},
2978
{ SRB_STATUS_NO_HBA, "No HBA"},
2979
{ SRB_STATUS_DATA_OVERRUN, "Data Overrun/Data Underrun"},
2980
{ SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"},
2981
{ SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"},
2982
{ SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"},
2983
{ SRB_STATUS_REQUEST_FLUSHED, "Request Flushed"},
2984
{ SRB_STATUS_DELAYED_RETRY, "Delayed Retry"},
2985
{ SRB_STATUS_INVALID_LUN, "Invalid LUN"},
2986
{ SRB_STATUS_INVALID_TARGET_ID, "Invalid TARGET ID"},
2987
{ SRB_STATUS_BAD_FUNCTION, "Bad Function"},
2988
{ SRB_STATUS_ERROR_RECOVERY, "Error Recovery"},
2989
{ SRB_STATUS_NOT_STARTED, "Not Started"},
2990
{ SRB_STATUS_NOT_IN_USE, "Not In Use"},
2991
{ SRB_STATUS_FORCE_ABORT, "Force Abort"},
2992
{ SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"},
2993
{ 0xff, "Unknown Error"}
2996
char *aac_get_status_string(u32 status)
3000
for (i = 0; i < ARRAY_SIZE(srb_status_info); i++)
3001
if (srb_status_info[i].status == status)
3002
return srb_status_info[i].str;
3004
return "Bad Status Code";