2
* composite.h -- framework for usb gadgets which are composite devices
4
* Copyright (C) 2006-2008 David Brownell
6
* This program is free software; you can redistribute it and/or modify
7
* it under the terms of the GNU General Public License as published by
8
* the Free Software Foundation; either version 2 of the License, or
9
* (at your option) any later version.
11
* This program is distributed in the hope that it will be useful,
12
* but WITHOUT ANY WARRANTY; without even the implied warranty of
13
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14
* GNU General Public License for more details.
16
* You should have received a copy of the GNU General Public License
17
* along with this program; if not, write to the Free Software
18
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21
#ifndef __LINUX_USB_COMPOSITE_H
22
#define __LINUX_USB_COMPOSITE_H
25
* This framework is an optional layer on top of the USB Gadget interface,
26
* making it easier to build (a) Composite devices, supporting multiple
27
* functions within any single configuration, and (b) Multi-configuration
28
* devices, also supporting multiple functions but without necessarily
29
* having more than one function per configuration.
31
* Example: a device with a single configuration supporting both network
32
* link and mass storage functions is a composite device. Those functions
33
* might alternatively be packaged in individual configurations, but in
34
* the composite model the host can use both functions at the same time.
37
#include <linux/usb/ch9.h>
38
#include <linux/usb/gadget.h>
41
* USB function drivers should return USB_GADGET_DELAYED_STATUS if they
42
* wish to delay the data/status stages of the control transfer till they
43
* are ready. The control transfer will then be kept from completing till
44
* all the function drivers that requested for USB_GADGET_DELAYED_STAUS
45
* invoke usb_composite_setup_continue().
47
#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */
49
struct usb_configuration;
52
* struct usb_function - describes one function of a configuration
53
* @name: For diagnostics, identifies the function.
54
* @strings: tables of strings, keyed by identifiers assigned during bind()
55
* and by language IDs provided in control requests
56
* @descriptors: Table of full (or low) speed descriptors, using interface and
57
* string identifiers assigned during @bind(). If this pointer is null,
58
* the function will not be available at full speed (or at low speed).
59
* @hs_descriptors: Table of high speed descriptors, using interface and
60
* string identifiers assigned during @bind(). If this pointer is null,
61
* the function will not be available at high speed.
62
* @ss_descriptors: Table of super speed descriptors, using interface and
63
* string identifiers assigned during @bind(). If this
64
* pointer is null after initiation, the function will not
65
* be available at super speed.
66
* @config: assigned when @usb_add_function() is called; this is the
67
* configuration with which this function is associated.
68
* @bind: Before the gadget can register, all of its functions bind() to the
69
* available resources including string and interface identifiers used
70
* in interface or class descriptors; endpoints; I/O buffers; and so on.
71
* @unbind: Reverses @bind; called as a side effect of unregistering the
72
* driver which added this function.
73
* @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
74
* initialize usb_ep.driver data at this time (when it is used).
75
* Note that setting an interface to its current altsetting resets
76
* interface state, and that all interfaces have a disabled state.
77
* @get_alt: Returns the active altsetting. If this is not provided,
78
* then only altsetting zero is supported.
79
* @disable: (REQUIRED) Indicates the function should be disabled. Reasons
80
* include host resetting or reconfiguring the gadget, and disconnection.
81
* @setup: Used for interface-specific control requests.
82
* @suspend: Notifies functions when the host stops sending USB traffic.
83
* @resume: Notifies functions when the host restarts USB traffic.
84
* @get_status: Returns function status as a reply to
85
* GetStatus() request when the recepient is Interface.
86
* @func_suspend: callback to be called when
87
* SetFeature(FUNCTION_SUSPEND) is reseived
89
* A single USB function uses one or more interfaces, and should in most
90
* cases support operation at both full and high speeds. Each function is
91
* associated by @usb_add_function() with a one configuration; that function
92
* causes @bind() to be called so resources can be allocated as part of
93
* setting up a gadget driver. Those resources include endpoints, which
94
* should be allocated using @usb_ep_autoconfig().
96
* To support dual speed operation, a function driver provides descriptors
97
* for both high and full speed operation. Except in rare cases that don't
98
* involve bulk endpoints, each speed needs different endpoint descriptors.
100
* Function drivers choose their own strategies for managing instance data.
101
* The simplest strategy just declares it "static', which means the function
102
* can only be activated once. If the function needs to be exposed in more
103
* than one configuration at a given speed, it needs to support multiple
104
* usb_function structures (one for each configuration).
106
* A more complex strategy might encapsulate a @usb_function structure inside
107
* a driver-specific instance structure to allows multiple activations. An
108
* example of multiple activations might be a CDC ACM function that supports
109
* two or more distinct instances within the same configuration, providing
110
* several independent logical data links to a USB host.
112
struct usb_function {
114
struct usb_gadget_strings **strings;
115
struct usb_descriptor_header **descriptors;
116
struct usb_descriptor_header **hs_descriptors;
117
struct usb_descriptor_header **ss_descriptors;
119
struct usb_configuration *config;
121
/* REVISIT: bind() functions can be marked __init, which
122
* makes trouble for section mismatch analysis. See if
123
* we can't restructure things to avoid mismatching.
124
* Related: unbind() may kfree() but bind() won't...
127
/* configuration management: bind/unbind */
128
int (*bind)(struct usb_configuration *,
129
struct usb_function *);
130
void (*unbind)(struct usb_configuration *,
131
struct usb_function *);
133
/* runtime state management */
134
int (*set_alt)(struct usb_function *,
135
unsigned interface, unsigned alt);
136
int (*get_alt)(struct usb_function *,
138
void (*disable)(struct usb_function *);
139
int (*setup)(struct usb_function *,
140
const struct usb_ctrlrequest *);
141
void (*suspend)(struct usb_function *);
142
void (*resume)(struct usb_function *);
144
/* USB 3.0 additions */
145
int (*get_status)(struct usb_function *);
146
int (*func_suspend)(struct usb_function *,
150
struct list_head list;
151
DECLARE_BITMAP(endpoints, 32);
154
int usb_add_function(struct usb_configuration *, struct usb_function *);
156
int usb_function_deactivate(struct usb_function *);
157
int usb_function_activate(struct usb_function *);
159
int usb_interface_id(struct usb_configuration *, struct usb_function *);
161
int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
164
#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */
167
* struct usb_configuration - represents one gadget configuration
168
* @label: For diagnostics, describes the configuration.
169
* @strings: Tables of strings, keyed by identifiers assigned during @bind()
170
* and by language IDs provided in control requests.
171
* @descriptors: Table of descriptors preceding all function descriptors.
172
* Examples include OTG and vendor-specific descriptors.
173
* @unbind: Reverses @bind; called as a side effect of unregistering the
174
* driver which added this configuration.
175
* @setup: Used to delegate control requests that aren't handled by standard
176
* device infrastructure or directed at a specific interface.
177
* @bConfigurationValue: Copied into configuration descriptor.
178
* @iConfiguration: Copied into configuration descriptor.
179
* @bmAttributes: Copied into configuration descriptor.
180
* @bMaxPower: Copied into configuration descriptor.
181
* @cdev: assigned by @usb_add_config() before calling @bind(); this is
182
* the device associated with this configuration.
184
* Configurations are building blocks for gadget drivers structured around
185
* function drivers. Simple USB gadgets require only one function and one
186
* configuration, and handle dual-speed hardware by always providing the same
187
* functionality. Slightly more complex gadgets may have more than one
188
* single-function configuration at a given speed; or have configurations
189
* that only work at one speed.
191
* Composite devices are, by definition, ones with configurations which
192
* include more than one function.
194
* The lifecycle of a usb_configuration includes allocation, initialization
195
* of the fields described above, and calling @usb_add_config() to set up
196
* internal data and bind it to a specific device. The configuration's
197
* @bind() method is then used to initialize all the functions and then
198
* call @usb_add_function() for them.
200
* Those functions would normally be independent of each other, but that's
201
* not mandatory. CDC WMC devices are an example where functions often
202
* depend on other functions, with some functions subsidiary to others.
203
* Such interdependency may be managed in any way, so long as all of the
204
* descriptors complete by the time the composite driver returns from
205
* its bind() routine.
207
struct usb_configuration {
209
struct usb_gadget_strings **strings;
210
const struct usb_descriptor_header **descriptors;
212
/* REVISIT: bind() functions can be marked __init, which
213
* makes trouble for section mismatch analysis. See if
214
* we can't restructure things to avoid mismatching...
217
/* configuration management: unbind/setup */
218
void (*unbind)(struct usb_configuration *);
219
int (*setup)(struct usb_configuration *,
220
const struct usb_ctrlrequest *);
222
/* fields in the config descriptor */
223
u8 bConfigurationValue;
228
struct usb_composite_dev *cdev;
232
struct list_head list;
233
struct list_head functions;
234
u8 next_interface_id;
235
unsigned superspeed:1;
236
unsigned highspeed:1;
237
unsigned fullspeed:1;
238
struct usb_function *interface[MAX_CONFIG_INTERFACES];
241
int usb_add_config(struct usb_composite_dev *,
242
struct usb_configuration *,
243
int (*)(struct usb_configuration *));
246
* struct usb_composite_driver - groups configurations into a gadget
247
* @name: For diagnostics, identifies the driver.
248
* @iProduct: Used as iProduct override if @dev->iProduct is not set.
249
* If NULL value of @name is taken.
250
* @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
251
* not set. If NULL a default "<system> <release> with <udc>" value
253
* @dev: Template descriptor for the device, including default device
255
* @strings: tables of strings, keyed by identifiers assigned during bind()
256
* and language IDs provided in control requests
257
* @max_speed: Highest speed the driver supports.
258
* @needs_serial: set to 1 if the gadget needs userspace to provide
259
* a serial number. If one is not provided, warning will be printed.
260
* @unbind: Reverses bind; called as a side effect of unregistering
262
* @disconnect: optional driver disconnect method
263
* @suspend: Notifies when the host stops sending USB traffic,
264
* after function notifications
265
* @resume: Notifies configuration when the host restarts USB traffic,
266
* before function notifications
268
* Devices default to reporting self powered operation. Devices which rely
269
* on bus powered operation should report this in their @bind() method.
271
* Before returning from bind, various fields in the template descriptor
272
* may be overridden. These include the idVendor/idProduct/bcdDevice values
273
* normally to bind the appropriate host side driver, and the three strings
274
* (iManufacturer, iProduct, iSerialNumber) normally used to provide user
275
* meaningful device identifiers. (The strings will not be defined unless
276
* they are defined in @dev and @strings.) The correct ep0 maxpacket size
277
* is also reported, as defined by the underlying controller driver.
279
struct usb_composite_driver {
281
const char *iProduct;
282
const char *iManufacturer;
283
const struct usb_device_descriptor *dev;
284
struct usb_gadget_strings **strings;
285
enum usb_device_speed max_speed;
286
unsigned needs_serial:1;
288
int (*unbind)(struct usb_composite_dev *);
290
void (*disconnect)(struct usb_composite_dev *);
292
/* global suspend hooks */
293
void (*suspend)(struct usb_composite_dev *);
294
void (*resume)(struct usb_composite_dev *);
297
extern int usb_composite_probe(struct usb_composite_driver *driver,
298
int (*bind)(struct usb_composite_dev *cdev));
299
extern void usb_composite_unregister(struct usb_composite_driver *driver);
300
extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
304
* struct usb_composite_device - represents one composite usb gadget
305
* @gadget: read-only, abstracts the gadget's usb peripheral controller
306
* @req: used for control responses; buffer is pre-allocated
307
* @bufsiz: size of buffer pre-allocated in @req
308
* @config: the currently active configuration
310
* One of these devices is allocated and initialized before the
311
* associated device driver's bind() is called.
313
* OPEN ISSUE: it appears that some WUSB devices will need to be
314
* built by combining a normal (wired) gadget with a wireless one.
315
* This revision of the gadget framework should probably try to make
316
* sure doing that won't hurt too much.
318
* One notion for how to handle Wireless USB devices involves:
319
* (a) a second gadget here, discovery mechanism TBD, but likely
320
* needing separate "register/unregister WUSB gadget" calls;
321
* (b) updates to usb_gadget to include flags "is it wireless",
322
* "is it wired", plus (presumably in a wrapper structure)
323
* bandgroup and PHY info;
324
* (c) presumably a wireless_ep wrapping a usb_ep, and reporting
325
* wireless-specific parameters like maxburst and maxsequence;
326
* (d) configurations that are specific to wireless links;
327
* (e) function drivers that understand wireless configs and will
328
* support wireless for (additional) function instances;
329
* (f) a function to support association setup (like CBAF), not
330
* necessarily requiring a wireless adapter;
331
* (g) composite device setup that can create one or more wireless
332
* configs, including appropriate association setup support;
335
struct usb_composite_dev {
336
struct usb_gadget *gadget;
337
struct usb_request *req;
340
struct usb_configuration *config;
344
unsigned int suspended:1;
345
struct usb_device_descriptor desc;
346
struct list_head configs;
347
struct usb_composite_driver *driver;
349
u8 manufacturer_override;
353
/* the gadget driver won't enable the data pullup
354
* while the deactivation count is nonzero.
356
unsigned deactivations;
358
/* the composite driver won't complete the control transfer's
359
* data/status stages till delayed_status is zero.
363
/* protects deactivations and delayed_status counts*/
367
extern int usb_string_id(struct usb_composite_dev *c);
368
extern int usb_string_ids_tab(struct usb_composite_dev *c,
369
struct usb_string *str);
370
extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
373
/* messaging utils */
374
#define DBG(d, fmt, args...) \
375
dev_dbg(&(d)->gadget->dev , fmt , ## args)
376
#define VDBG(d, fmt, args...) \
377
dev_vdbg(&(d)->gadget->dev , fmt , ## args)
378
#define ERROR(d, fmt, args...) \
379
dev_err(&(d)->gadget->dev , fmt , ## args)
380
#define WARNING(d, fmt, args...) \
381
dev_warn(&(d)->gadget->dev , fmt , ## args)
382
#define INFO(d, fmt, args...) \
383
dev_info(&(d)->gadget->dev , fmt , ## args)
385
#endif /* __LINUX_USB_COMPOSITE_H */