2
* linux/drivers/pcmcia/soc_common.h
4
* Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
6
* This file contains definitions for the PCMCIA support code common to
7
* integrated SOCs like the SA-11x0 and PXA2xx microprocessors.
9
#ifndef _ASM_ARCH_PCMCIA
10
#define _ASM_ARCH_PCMCIA
12
/* include the world */
13
#include <linux/clk.h>
14
#include <linux/cpufreq.h>
15
#include <pcmcia/ss.h>
16
#include <pcmcia/cistpl.h>
20
struct pcmcia_low_level;
23
* This structure encapsulates per-socket state which we might need to
24
* use when responding to a Card Services query of some kind.
26
struct soc_pcmcia_socket {
27
struct pcmcia_socket socket;
30
* Info from low level handler
38
const struct pcmcia_low_level *ops;
41
socket_state_t cs_state;
43
unsigned short spd_io[MAX_IO_WIN];
44
unsigned short spd_mem[MAX_WIN];
45
unsigned short spd_attr[MAX_WIN];
47
struct resource res_skt;
48
struct resource res_io;
49
struct resource res_mem;
50
struct resource res_attr;
51
void __iomem *virt_io;
53
unsigned int irq_state;
55
struct timer_list poll_timer;
56
struct list_head node;
62
struct soc_pcmcia_socket skt[0];
75
struct pcmcia_low_level {
78
/* first socket in system */
83
int (*hw_init)(struct soc_pcmcia_socket *);
84
void (*hw_shutdown)(struct soc_pcmcia_socket *);
86
void (*socket_state)(struct soc_pcmcia_socket *, struct pcmcia_state *);
87
int (*configure_socket)(struct soc_pcmcia_socket *, const socket_state_t *);
90
* Enable card status IRQs on (re-)initialisation. This can
91
* be called at initialisation, power management event, or
94
void (*socket_init)(struct soc_pcmcia_socket *);
97
* Disable card status IRQs and PCMCIA bus on suspend.
99
void (*socket_suspend)(struct soc_pcmcia_socket *);
102
* Hardware specific timing routines.
103
* If provided, the get_timing routine overrides the SOC default.
105
unsigned int (*get_timing)(struct soc_pcmcia_socket *, unsigned int, unsigned int);
106
int (*set_timing)(struct soc_pcmcia_socket *);
107
int (*show_timing)(struct soc_pcmcia_socket *, char *);
109
#ifdef CONFIG_CPU_FREQ
113
int (*frequency_change)(struct soc_pcmcia_socket *, unsigned long, struct cpufreq_freqs *);
124
struct soc_pcmcia_timing {
130
extern int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt, struct pcmcia_irqs *irqs, int nr);
131
extern void soc_pcmcia_free_irqs(struct soc_pcmcia_socket *skt, struct pcmcia_irqs *irqs, int nr);
132
extern void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt, struct pcmcia_irqs *irqs, int nr);
133
extern void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt, struct pcmcia_irqs *irqs, int nr);
134
extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_pcmcia_timing *);
137
void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt);
138
int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt);
141
#ifdef CONFIG_PCMCIA_DEBUG
143
extern void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
144
int lvl, const char *fmt, ...);
146
#define debug(skt, lvl, fmt, arg...) \
147
soc_pcmcia_debug(skt, __func__, lvl, fmt , ## arg)
150
#define debug(skt, lvl, fmt, arg...) do { } while (0)
155
* The PC Card Standard, Release 7, section 4.13.4, says that twIORD
156
* has a minimum value of 165ns. Section 4.13.5 says that twIOWR has
157
* a minimum value of 165ns, as well. Section 4.7.2 (describing
158
* common and attribute memory write timing) says that twWE has a
159
* minimum value of 150ns for a 250ns cycle time (for 5V operation;
160
* see section 4.7.4), or 300ns for a 600ns cycle time (for 3.3V
161
* operation, also section 4.7.4). Section 4.7.3 says that taOE
162
* has a maximum value of 150ns for a 300ns cycle time (for 5V
163
* operation), or 300ns for a 600ns cycle time (for 3.3V operation).
165
* When configuring memory maps, Card Services appears to adopt the policy
166
* that a memory access time of "0" means "use the default." The default
167
* PCMCIA I/O command width time is 165ns. The default PCMCIA 5V attribute
168
* and memory command width time is 150ns; the PCMCIA 3.3V attribute and
169
* memory command width time is 300ns.
171
#define SOC_PCMCIA_IO_ACCESS (165)
172
#define SOC_PCMCIA_5V_MEM_ACCESS (150)
173
#define SOC_PCMCIA_3V_MEM_ACCESS (300)
174
#define SOC_PCMCIA_ATTR_MEM_ACCESS (300)
177
* The socket driver actually works nicely in interrupt-driven form,
178
* so the (relatively infrequent) polling is "just to be sure."
180
#define SOC_PCMCIA_POLL_PERIOD (2*HZ)
183
/* I/O pins replacing memory pins
184
* (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75)
186
* These signals change meaning when going from memory-only to
187
* memory-or-I/O interface:
189
#define iostschg bvd1