2
* linux/drivers/acorn/scsi/powertec.c
4
* Copyright (C) 1997-2005 Russell King
6
* This program is free software; you can redistribute it and/or modify
7
* it under the terms of the GNU General Public License version 2 as
8
* published by the Free Software Foundation.
10
#include <linux/module.h>
11
#include <linux/blkdev.h>
12
#include <linux/kernel.h>
13
#include <linux/string.h>
14
#include <linux/ioport.h>
15
#include <linux/proc_fs.h>
16
#include <linux/delay.h>
17
#include <linux/interrupt.h>
18
#include <linux/init.h>
19
#include <linux/dma-mapping.h>
22
#include <asm/ecard.h>
24
#include <asm/pgtable.h>
27
#include <scsi/scsi_host.h>
31
#include <scsi/scsicam.h>
33
#define POWERTEC_FAS216_OFFSET 0x3000
34
#define POWERTEC_FAS216_SHIFT 6
36
#define POWERTEC_INTR_STATUS 0x2000
37
#define POWERTEC_INTR_BIT 0x80
39
#define POWERTEC_RESET_CONTROL 0x1018
40
#define POWERTEC_RESET_BIT 1
42
#define POWERTEC_TERM_CONTROL 0x2018
43
#define POWERTEC_TERM_ENABLE 1
45
#define POWERTEC_INTR_CONTROL 0x101c
46
#define POWERTEC_INTR_ENABLE 1
47
#define POWERTEC_INTR_DISABLE 0
49
#define VERSION "1.10 (19/01/2003 2.5.59)"
52
* Use term=0,1,0,0,0 to turn terminators on/off.
55
static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 };
59
struct powertec_info {
61
struct expansion_card *ec;
63
unsigned int term_ctl;
64
struct scatterlist sg[NR_SG];
67
/* Prototype: void powertecscsi_irqenable(ec, irqnr)
68
* Purpose : Enable interrupts on Powertec SCSI card
69
* Params : ec - expansion card structure
70
* : irqnr - interrupt number
73
powertecscsi_irqenable(struct expansion_card *ec, int irqnr)
75
struct powertec_info *info = ec->irq_data;
76
writeb(POWERTEC_INTR_ENABLE, info->base + POWERTEC_INTR_CONTROL);
79
/* Prototype: void powertecscsi_irqdisable(ec, irqnr)
80
* Purpose : Disable interrupts on Powertec SCSI card
81
* Params : ec - expansion card structure
82
* : irqnr - interrupt number
85
powertecscsi_irqdisable(struct expansion_card *ec, int irqnr)
87
struct powertec_info *info = ec->irq_data;
88
writeb(POWERTEC_INTR_DISABLE, info->base + POWERTEC_INTR_CONTROL);
91
static const expansioncard_ops_t powertecscsi_ops = {
92
.irqenable = powertecscsi_irqenable,
93
.irqdisable = powertecscsi_irqdisable,
96
/* Prototype: void powertecscsi_terminator_ctl(host, on_off)
97
* Purpose : Turn the Powertec SCSI terminators on or off
98
* Params : host - card to turn on/off
99
* : on_off - !0 to turn on, 0 to turn off
102
powertecscsi_terminator_ctl(struct Scsi_Host *host, int on_off)
104
struct powertec_info *info = (struct powertec_info *)host->hostdata;
106
info->term_ctl = on_off ? POWERTEC_TERM_ENABLE : 0;
107
writeb(info->term_ctl, info->base + POWERTEC_TERM_CONTROL);
110
/* Prototype: void powertecscsi_intr(irq, *dev_id, *regs)
111
* Purpose : handle interrupts from Powertec SCSI card
112
* Params : irq - interrupt number
113
* dev_id - user-defined (Scsi_Host structure)
115
static irqreturn_t powertecscsi_intr(int irq, void *dev_id)
117
struct powertec_info *info = dev_id;
119
return fas216_intr(&info->info);
122
/* Prototype: fasdmatype_t powertecscsi_dma_setup(host, SCpnt, direction, min_type)
123
* Purpose : initialises DMA/PIO
124
* Params : host - host
126
* direction - DMA on to/off of card
127
* min_type - minimum DMA support that we must have for this transfer
128
* Returns : type of transfer to be performed
131
powertecscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
132
fasdmadir_t direction, fasdmatype_t min_type)
134
struct powertec_info *info = (struct powertec_info *)host->hostdata;
135
struct device *dev = scsi_get_device(host);
136
int dmach = info->info.scsi.dma;
138
if (info->info.ifcfg.capabilities & FASCAP_DMA &&
139
min_type == fasdma_real_all) {
140
int bufs, map_dir, dma_dir;
142
bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG);
144
if (direction == DMA_OUT)
145
map_dir = DMA_TO_DEVICE,
146
dma_dir = DMA_MODE_WRITE;
148
map_dir = DMA_FROM_DEVICE,
149
dma_dir = DMA_MODE_READ;
151
dma_map_sg(dev, info->sg, bufs, map_dir);
154
set_dma_sg(dmach, info->sg, bufs);
155
set_dma_mode(dmach, dma_dir);
157
return fasdma_real_all;
161
* If we're not doing DMA,
167
/* Prototype: int powertecscsi_dma_stop(host, SCpnt)
168
* Purpose : stops DMA/PIO
169
* Params : host - host
173
powertecscsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
175
struct powertec_info *info = (struct powertec_info *)host->hostdata;
176
if (info->info.scsi.dma != NO_DMA)
177
disable_dma(info->info.scsi.dma);
180
/* Prototype: const char *powertecscsi_info(struct Scsi_Host * host)
181
* Purpose : returns a descriptive string about this interface,
182
* Params : host - driver host structure to return info for.
183
* Returns : pointer to a static buffer containing null terminated string.
185
const char *powertecscsi_info(struct Scsi_Host *host)
187
struct powertec_info *info = (struct powertec_info *)host->hostdata;
188
static char string[150];
190
sprintf(string, "%s (%s) in slot %d v%s terminators o%s",
191
host->hostt->name, info->info.scsi.type, info->ec->slot_no,
192
VERSION, info->term_ctl ? "n" : "ff");
197
/* Prototype: int powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
198
* Purpose : Set a driver specific function
199
* Params : host - host to setup
200
* : buffer - buffer containing string describing operation
201
* : length - length of string
202
* Returns : -EINVAL, or 0
205
powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
209
if (length >= 12 && strncmp(buffer, "POWERTECSCSI", 12) == 0) {
213
if (length >= 5 && strncmp(buffer, "term=", 5) == 0) {
214
if (buffer[5] == '1')
215
powertecscsi_terminator_ctl(host, 1);
216
else if (buffer[5] == '0')
217
powertecscsi_terminator_ctl(host, 0);
228
/* Prototype: int powertecscsi_proc_info(char *buffer, char **start, off_t offset,
229
* int length, int host_no, int inout)
230
* Purpose : Return information about the driver to a user process accessing
231
* the /proc filesystem.
232
* Params : buffer - a buffer to write information to
233
* start - a pointer into this buffer set by this routine to the start
234
* of the required information.
235
* offset - offset into information that we have read up to.
236
* length - length of buffer
237
* inout - 0 for reading, 1 for writing.
238
* Returns : length of data written to buffer.
240
int powertecscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
241
int length, int inout)
243
struct powertec_info *info;
248
return powertecscsi_set_proc_info(host, buffer, length);
250
info = (struct powertec_info *)host->hostdata;
252
p += sprintf(p, "PowerTec SCSI driver v%s\n", VERSION);
253
p += fas216_print_host(&info->info, p);
254
p += sprintf(p, "Term : o%s\n",
255
info->term_ctl ? "n" : "ff");
257
p += fas216_print_stats(&info->info, p);
258
p += fas216_print_devices(&info->info, p);
260
*start = buffer + offset;
261
pos = p - buffer - offset;
268
static ssize_t powertecscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
270
struct expansion_card *ec = ECARD_DEV(dev);
271
struct Scsi_Host *host = ecard_get_drvdata(ec);
272
struct powertec_info *info = (struct powertec_info *)host->hostdata;
274
return sprintf(buf, "%d\n", info->term_ctl ? 1 : 0);
278
powertecscsi_store_term(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)
280
struct expansion_card *ec = ECARD_DEV(dev);
281
struct Scsi_Host *host = ecard_get_drvdata(ec);
284
powertecscsi_terminator_ctl(host, buf[0] != '0');
289
static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
290
powertecscsi_show_term, powertecscsi_store_term);
292
static struct scsi_host_template powertecscsi_template = {
293
.module = THIS_MODULE,
294
.proc_info = powertecscsi_proc_info,
295
.name = "PowerTec SCSI",
296
.info = powertecscsi_info,
297
.queuecommand = fas216_queue_command,
298
.eh_host_reset_handler = fas216_eh_host_reset,
299
.eh_bus_reset_handler = fas216_eh_bus_reset,
300
.eh_device_reset_handler = fas216_eh_device_reset,
301
.eh_abort_handler = fas216_eh_abort,
305
.sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
306
.dma_boundary = IOMD_DMA_BOUNDARY,
308
.use_clustering = ENABLE_CLUSTERING,
309
.proc_name = "powertec",
313
powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
315
struct Scsi_Host *host;
316
struct powertec_info *info;
320
ret = ecard_request_resources(ec);
324
base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
330
host = scsi_host_alloc(&powertecscsi_template,
331
sizeof (struct powertec_info));
337
ecard_set_drvdata(ec, host);
339
info = (struct powertec_info *)host->hostdata;
341
powertecscsi_terminator_ctl(host, term[ec->slot_no]);
344
info->info.scsi.io_base = base + POWERTEC_FAS216_OFFSET;
345
info->info.scsi.io_shift = POWERTEC_FAS216_SHIFT;
346
info->info.scsi.irq = ec->irq;
347
info->info.scsi.dma = ec->dma;
348
info->info.ifcfg.clockrate = 40; /* MHz */
349
info->info.ifcfg.select_timeout = 255;
350
info->info.ifcfg.asyncperiod = 200; /* ns */
351
info->info.ifcfg.sync_max_depth = 7;
352
info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK;
353
info->info.ifcfg.disconnect_ok = 1;
354
info->info.ifcfg.wide_max_size = 0;
355
info->info.ifcfg.capabilities = 0;
356
info->info.dma.setup = powertecscsi_dma_setup;
357
info->info.dma.pseudo = NULL;
358
info->info.dma.stop = powertecscsi_dma_stop;
360
ec->irqaddr = base + POWERTEC_INTR_STATUS;
361
ec->irqmask = POWERTEC_INTR_BIT;
363
ecard_setirq(ec, &powertecscsi_ops, info);
365
device_create_file(&ec->dev, &dev_attr_bus_term);
367
ret = fas216_init(host);
371
ret = request_irq(ec->irq, powertecscsi_intr,
372
IRQF_DISABLED, "powertec", info);
374
printk("scsi%d: IRQ%d not free: %d\n",
375
host->host_no, ec->irq, ret);
379
if (info->info.scsi.dma != NO_DMA) {
380
if (request_dma(info->info.scsi.dma, "powertec")) {
381
printk("scsi%d: DMA%d not free, using PIO\n",
382
host->host_no, info->info.scsi.dma);
383
info->info.scsi.dma = NO_DMA;
385
set_dma_speed(info->info.scsi.dma, 180);
386
info->info.ifcfg.capabilities |= FASCAP_DMA;
390
ret = fas216_add(host, &ec->dev);
394
if (info->info.scsi.dma != NO_DMA)
395
free_dma(info->info.scsi.dma);
396
free_irq(ec->irq, host);
399
fas216_release(host);
402
device_remove_file(&ec->dev, &dev_attr_bus_term);
406
ecard_release_resources(ec);
412
static void __devexit powertecscsi_remove(struct expansion_card *ec)
414
struct Scsi_Host *host = ecard_get_drvdata(ec);
415
struct powertec_info *info = (struct powertec_info *)host->hostdata;
417
ecard_set_drvdata(ec, NULL);
420
device_remove_file(&ec->dev, &dev_attr_bus_term);
422
if (info->info.scsi.dma != NO_DMA)
423
free_dma(info->info.scsi.dma);
424
free_irq(ec->irq, info);
426
fas216_release(host);
428
ecard_release_resources(ec);
431
static const struct ecard_id powertecscsi_cids[] = {
432
{ MANU_ALSYSTEMS, PROD_ALSYS_SCSIATAPI },
436
static struct ecard_driver powertecscsi_driver = {
437
.probe = powertecscsi_probe,
438
.remove = __devexit_p(powertecscsi_remove),
439
.id_table = powertecscsi_cids,
441
.name = "powertecscsi",
445
static int __init powertecscsi_init(void)
447
return ecard_register_driver(&powertecscsi_driver);
450
static void __exit powertecscsi_exit(void)
452
ecard_remove_driver(&powertecscsi_driver);
455
module_init(powertecscsi_init);
456
module_exit(powertecscsi_exit);
458
MODULE_AUTHOR("Russell King");
459
MODULE_DESCRIPTION("Powertec SCSI driver");
460
module_param_array(term, int, NULL, 0);
461
MODULE_PARM_DESC(term, "SCSI bus termination");
462
MODULE_LICENSE("GPL");