4
* The LM70 is a temperature sensor chip from National Semiconductor (NS).
5
* Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
7
* The LM70 communicates with a host processor via an SPI/Microwire Bus
8
* interface. The complete datasheet is available at National's website
10
* http://www.national.com/pf/LM/LM70.html
12
* This program is free software; you can redistribute it and/or modify
13
* it under the terms of the GNU General Public License as published by
14
* the Free Software Foundation; either version 2 of the License, or
15
* (at your option) any later version.
17
* This program is distributed in the hope that it will be useful,
18
* but WITHOUT ANY WARRANTY; without even the implied warranty of
19
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20
* GNU General Public License for more details.
22
* You should have received a copy of the GNU General Public License
23
* along with this program; if not, write to the Free Software
24
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29
#include <linux/init.h>
30
#include <linux/module.h>
31
#include <linux/kernel.h>
32
#include <linux/device.h>
33
#include <linux/err.h>
34
#include <linux/sysfs.h>
35
#include <linux/hwmon.h>
36
#include <linux/mutex.h>
37
#include <linux/mod_devicetable.h>
38
#include <linux/spi/spi.h>
39
#include <linux/slab.h>
42
#define DRVNAME "lm70"
44
#define LM70_CHIP_LM70 0 /* original NS LM70 */
45
#define LM70_CHIP_TMP121 1 /* TI TMP121/TMP123 */
48
struct device *hwmon_dev;
53
/* sysfs hook function */
54
static ssize_t lm70_sense_temp(struct device *dev,
55
struct device_attribute *attr, char *buf)
57
struct spi_device *spi = to_spi_device(dev);
61
struct lm70 *p_lm70 = spi_get_drvdata(spi);
63
if (mutex_lock_interruptible(&p_lm70->lock))
67
* spi_read() requires a DMA-safe buffer; so we use
68
* spi_write_then_read(), transmitting 0 bytes.
70
status = spi_write_then_read(spi, NULL, 0, &rxbuf[0], 2);
72
pr_warn("spi_write_then_read failed with status %d\n", status);
75
raw = (rxbuf[0] << 8) + rxbuf[1];
76
dev_dbg(dev, "rxbuf[0] : 0x%02x rxbuf[1] : 0x%02x raw=0x%04x\n",
77
rxbuf[0], rxbuf[1], raw);
81
* The "raw" temperature read into rxbuf[] is a 16-bit signed 2's
82
* complement value. Only the MSB 11 bits (1 sign + 10 temperature
83
* bits) are meaningful; the LSB 5 bits are to be discarded.
86
* Further, each bit represents 0.25 degrees Celsius; so, multiply
87
* by 0.25. Also multiply by 1000 to represent in millidegrees
89
* So it's equivalent to multiplying by 0.25 * 1000 = 250.
92
* 13 bits of 2's complement data, discard LSB 3 bits,
93
* resolution 0.0625 degrees celsius.
95
switch (p_lm70->chip) {
97
val = ((int)raw / 32) * 250;
100
case LM70_CHIP_TMP121:
101
val = ((int)raw / 8) * 625 / 10;
105
status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
107
mutex_unlock(&p_lm70->lock);
111
static DEVICE_ATTR(temp1_input, S_IRUGO, lm70_sense_temp, NULL);
113
static ssize_t lm70_show_name(struct device *dev, struct device_attribute
116
struct lm70 *p_lm70 = dev_get_drvdata(dev);
119
switch (p_lm70->chip) {
121
ret = sprintf(buf, "lm70\n");
123
case LM70_CHIP_TMP121:
124
ret = sprintf(buf, "tmp121\n");
132
static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL);
134
/*----------------------------------------------------------------------*/
136
static int __devinit lm70_probe(struct spi_device *spi)
138
int chip = spi_get_device_id(spi)->driver_data;
142
/* signaling is SPI_MODE_0 for both LM70 and TMP121 */
143
if (spi->mode & (SPI_CPOL | SPI_CPHA))
146
/* 3-wire link (shared SI/SO) for LM70 */
147
if (chip == LM70_CHIP_LM70 && !(spi->mode & SPI_3WIRE))
150
/* NOTE: we assume 8-bit words, and convert to 16 bits manually */
152
p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL);
156
mutex_init(&p_lm70->lock);
160
p_lm70->hwmon_dev = hwmon_device_register(&spi->dev);
161
if (IS_ERR(p_lm70->hwmon_dev)) {
162
dev_dbg(&spi->dev, "hwmon_device_register failed.\n");
163
status = PTR_ERR(p_lm70->hwmon_dev);
164
goto out_dev_reg_failed;
166
spi_set_drvdata(spi, p_lm70);
168
if ((status = device_create_file(&spi->dev, &dev_attr_temp1_input))
169
|| (status = device_create_file(&spi->dev, &dev_attr_name))) {
170
dev_dbg(&spi->dev, "device_create_file failure.\n");
171
goto out_dev_create_file_failed;
176
out_dev_create_file_failed:
177
device_remove_file(&spi->dev, &dev_attr_temp1_input);
178
hwmon_device_unregister(p_lm70->hwmon_dev);
180
spi_set_drvdata(spi, NULL);
185
static int __devexit lm70_remove(struct spi_device *spi)
187
struct lm70 *p_lm70 = spi_get_drvdata(spi);
189
device_remove_file(&spi->dev, &dev_attr_temp1_input);
190
device_remove_file(&spi->dev, &dev_attr_name);
191
hwmon_device_unregister(p_lm70->hwmon_dev);
192
spi_set_drvdata(spi, NULL);
199
static const struct spi_device_id lm70_ids[] = {
200
{ "lm70", LM70_CHIP_LM70 },
201
{ "tmp121", LM70_CHIP_TMP121 },
204
MODULE_DEVICE_TABLE(spi, lm70_ids);
206
static struct spi_driver lm70_driver = {
209
.owner = THIS_MODULE,
211
.id_table = lm70_ids,
213
.remove = __devexit_p(lm70_remove),
216
static int __init init_lm70(void)
218
return spi_register_driver(&lm70_driver);
221
static void __exit cleanup_lm70(void)
223
spi_unregister_driver(&lm70_driver);
226
module_init(init_lm70);
227
module_exit(cleanup_lm70);
229
MODULE_AUTHOR("Kaiwan N Billimoria");
230
MODULE_DESCRIPTION("NS LM70 / TI TMP121/TMP123 Linux driver");
231
MODULE_LICENSE("GPL");