2
* This file is subject to the terms and conditions of the GNU General Public
3
* License. See the file "COPYING" in the main directory of this archive
6
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
9
#include <linux/init.h>
10
#include <linux/kernel.h>
11
#include <linux/delay.h>
12
#include <linux/bootmem.h>
13
#include <linux/ioport.h>
15
#include <asm/bootinfo.h>
17
#include <asm/reboot.h>
18
#include <asm/cacheflush.h>
19
#include <bcm63xx_board.h>
20
#include <bcm63xx_cpu.h>
21
#include <bcm63xx_regs.h>
22
#include <bcm63xx_io.h>
24
void bcm63xx_machine_halt(void)
26
printk(KERN_INFO "System halted\n");
31
static void bcm6348_a1_reboot(void)
35
/* soft reset all blocks */
36
printk(KERN_INFO "soft-reseting all blocks ...\n");
37
reg = bcm_perf_readl(PERF_SOFTRESET_REG);
38
reg &= ~SOFTRESET_6348_ALL;
39
bcm_perf_writel(reg, PERF_SOFTRESET_REG);
42
reg = bcm_perf_readl(PERF_SOFTRESET_REG);
43
reg |= SOFTRESET_6348_ALL;
44
bcm_perf_writel(reg, PERF_SOFTRESET_REG);
47
/* Jump to the power on address. */
48
printk(KERN_INFO "jumping to reset vector.\n");
49
/* set high vectors (base at 0xbfc00000 */
50
set_c0_status(ST0_BEV | ST0_ERL);
51
/* run uncached in kseg0 */
52
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
54
/* remove all wired TLB entries */
64
void bcm63xx_machine_reboot(void)
68
/* mask and clear all external irq */
69
reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
70
reg &= ~EXTIRQ_CFG_MASK_ALL;
71
reg |= EXTIRQ_CFG_CLEAR_ALL;
72
bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
74
if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
77
printk(KERN_INFO "triggering watchdog soft-reset...\n");
78
reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
79
reg |= SYS_PLL_SOFT_RESET;
80
bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
85
static void __bcm63xx_machine_reboot(char *p)
87
bcm63xx_machine_reboot();
91
* return system type in /proc/cpuinfo
93
const char *get_system_type(void)
96
snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)",
98
bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
102
void __init plat_time_init(void)
104
mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
107
void __init plat_mem_setup(void)
109
add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
111
_machine_halt = bcm63xx_machine_halt;
112
_machine_restart = __bcm63xx_machine_reboot;
113
pm_power_off = bcm63xx_machine_halt;
116
ioport_resource.start = 0;
117
ioport_resource.end = ~0;
122
int __init bcm63xx_register_devices(void)
124
return board_register_devices();
127
arch_initcall(bcm63xx_register_devices);