2
* ip22-berr.c: Bus error handling.
4
* Copyright (C) 2002, 2003 Ladislav Michl (ladis@linux-mips.org)
7
#include <linux/init.h>
8
#include <linux/kernel.h>
9
#include <linux/sched.h>
11
#include <asm/addrspace.h>
12
#include <asm/system.h>
13
#include <asm/traps.h>
14
#include <asm/branch.h>
15
#include <asm/irq_regs.h>
16
#include <asm/sgi/mc.h>
17
#include <asm/sgi/hpc3.h>
18
#include <asm/sgi/ioc.h>
19
#include <asm/sgi/ip22.h>
22
static unsigned int cpu_err_stat; /* Status reg for CPU */
23
static unsigned int gio_err_stat; /* Status reg for GIO */
24
static unsigned int cpu_err_addr; /* Error address reg for CPU */
25
static unsigned int gio_err_addr; /* Error address reg for GIO */
26
static unsigned int extio_stat;
27
static unsigned int hpc3_berr_stat; /* Bus error interrupt status */
29
static void save_and_clear_buserr(void)
31
/* save status registers */
32
cpu_err_addr = sgimc->cerr;
33
cpu_err_stat = sgimc->cstat;
34
gio_err_addr = sgimc->gerr;
35
gio_err_stat = sgimc->gstat;
36
extio_stat = ip22_is_fullhouse() ? sgioc->extio : (sgint->errstat << 4);
37
hpc3_berr_stat = hpc3c0->bestat;
39
sgimc->cstat = sgimc->gstat = 0;
42
#define GIO_ERRMASK 0xff00
43
#define CPU_ERRMASK 0x3f00
45
static void print_buserr(void)
47
if (extio_stat & EXTIO_MC_BUSERR)
48
printk(KERN_ERR "MC Bus Error\n");
49
if (extio_stat & EXTIO_HPC3_BUSERR)
50
printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n",
52
(hpc3_berr_stat & HPC3_BESTAT_PIDMASK) >>
54
(hpc3_berr_stat & HPC3_BESTAT_CTYPE) ? "PIO" : "DMA",
55
hpc3_berr_stat & HPC3_BESTAT_BLMASK);
56
if (extio_stat & EXTIO_EISA_BUSERR)
57
printk(KERN_ERR "EISA Bus Error\n");
58
if (cpu_err_stat & CPU_ERRMASK)
59
printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n",
61
cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "",
62
cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "",
63
cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "",
64
cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "",
65
cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "",
66
cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "",
68
if (gio_err_stat & GIO_ERRMASK)
69
printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n",
71
gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "",
72
gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "",
73
gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "",
74
gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "",
75
gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "",
76
gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "",
77
gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "",
78
gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "",
83
* MC sends an interrupt whenever bus or parity errors occur. In addition,
84
* if the error happened during a CPU read, it also asserts the bus error
85
* pin on the R4K. Code in bus error handler save the MC bus error registers
86
* and then clear the interrupt when this happens.
89
void ip22_be_interrupt(int irq)
91
const int field = 2 * sizeof(unsigned long);
92
struct pt_regs *regs = get_irq_regs();
94
save_and_clear_buserr();
96
printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
97
(regs->cp0_cause & 4) ? "Data" : "Instruction",
98
field, regs->cp0_epc, field, regs->regs[31]);
99
/* Assume it would be too dangerous to continue ... */
100
die_if_kernel("Oops", regs);
101
force_sig(SIGBUS, current);
104
static int ip22_be_handler(struct pt_regs *regs, int is_fixup)
106
save_and_clear_buserr();
108
return MIPS_BE_FIXUP;
110
return MIPS_BE_FATAL;
113
void __init ip22_be_init(void)
115
board_be_handler = ip22_be_handler;