2
* MC33880 high-side/low-side switch GPIO driver
3
* Copyright (c) 2009 Intel Corporation
5
* This program is free software; you can redistribute it and/or modify
6
* it under the terms of the GNU General Public License version 2 as
7
* published by the Free Software Foundation.
9
* This program is distributed in the hope that it will be useful,
10
* but WITHOUT ANY WARRANTY; without even the implied warranty of
11
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12
* GNU General Public License for more details.
14
* You should have received a copy of the GNU General Public License
15
* along with this program; if not, write to the Free Software
16
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
* Freescale MC33880 high-side/low-side switch
23
#include <linux/init.h>
24
#include <linux/mutex.h>
25
#include <linux/spi/spi.h>
26
#include <linux/spi/mc33880.h>
27
#include <linux/gpio.h>
28
#include <linux/slab.h>
29
#include <linux/module.h>
31
#define DRIVER_NAME "mc33880"
34
* Pin configurations, see MAX7301 datasheet page 6
36
#define PIN_CONFIG_MASK 0x03
37
#define PIN_CONFIG_IN_PULLUP 0x03
38
#define PIN_CONFIG_IN_WO_PULLUP 0x02
39
#define PIN_CONFIG_OUT 0x01
45
* Some registers must be read back to modify.
46
* To save time we cache them here in memory
49
struct mutex lock; /* protect from simultaneous accesses */
51
struct gpio_chip chip;
52
struct spi_device *spi;
55
static int mc33880_write_config(struct mc33880 *mc)
57
return spi_write(mc->spi, &mc->port_config, sizeof(mc->port_config));
61
static int __mc33880_set(struct mc33880 *mc, unsigned offset, int value)
64
mc->port_config |= 1 << offset;
66
mc->port_config &= ~(1 << offset);
68
return mc33880_write_config(mc);
72
static void mc33880_set(struct gpio_chip *chip, unsigned offset, int value)
74
struct mc33880 *mc = container_of(chip, struct mc33880, chip);
76
mutex_lock(&mc->lock);
78
__mc33880_set(mc, offset, value);
80
mutex_unlock(&mc->lock);
83
static int __devinit mc33880_probe(struct spi_device *spi)
86
struct mc33880_platform_data *pdata;
89
pdata = spi->dev.platform_data;
90
if (!pdata || !pdata->base) {
91
dev_dbg(&spi->dev, "incorrect or missing platform data\n");
96
* bits_per_word cannot be configured in platform data
98
spi->bits_per_word = 8;
100
ret = spi_setup(spi);
104
mc = kzalloc(sizeof(struct mc33880), GFP_KERNEL);
108
mutex_init(&mc->lock);
110
dev_set_drvdata(&spi->dev, mc);
114
mc->chip.label = DRIVER_NAME,
115
mc->chip.set = mc33880_set;
116
mc->chip.base = pdata->base;
117
mc->chip.ngpio = PIN_NUMBER;
118
mc->chip.can_sleep = 1;
119
mc->chip.dev = &spi->dev;
120
mc->chip.owner = THIS_MODULE;
122
mc->port_config = 0x00;
123
/* write twice, because during initialisation the first setting
124
* is just for testing SPI communication, and the second is the
125
* "real" configuration
127
ret = mc33880_write_config(mc);
128
mc->port_config = 0x00;
130
ret = mc33880_write_config(mc);
133
printk(KERN_ERR "Failed writing to " DRIVER_NAME ": %d\n", ret);
137
ret = gpiochip_add(&mc->chip);
144
dev_set_drvdata(&spi->dev, NULL);
145
mutex_destroy(&mc->lock);
150
static int __devexit mc33880_remove(struct spi_device *spi)
155
mc = dev_get_drvdata(&spi->dev);
159
dev_set_drvdata(&spi->dev, NULL);
161
ret = gpiochip_remove(&mc->chip);
163
mutex_destroy(&mc->lock);
166
dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
172
static struct spi_driver mc33880_driver = {
175
.owner = THIS_MODULE,
177
.probe = mc33880_probe,
178
.remove = __devexit_p(mc33880_remove),
181
static int __init mc33880_init(void)
183
return spi_register_driver(&mc33880_driver);
185
/* register after spi postcore initcall and before
186
* subsys initcalls that may rely on these GPIOs
188
subsys_initcall(mc33880_init);
190
static void __exit mc33880_exit(void)
192
spi_unregister_driver(&mc33880_driver);
194
module_exit(mc33880_exit);
196
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
197
MODULE_LICENSE("GPL v2");