2
* linux/arch/arm/mach-omap2/board-apollon.c
4
* Copyright (C) 2005,2006 Samsung Electronics
5
* Author: Kyungmin Park <kyungmin.park@samsung.com>
7
* Modified from mach-omap/omap2/board-h4.c
9
* Code for apollon OMAP2 board. Should work on many OMAP2 systems where
10
* the bootloader passes the board-specific data to the kernel.
11
* Do not put any board specific code to this file; create a new machine
12
* type if you need custom low-level initializations.
14
* This program is free software; you can redistribute it and/or modify
15
* it under the terms of the GNU General Public License version 2 as
16
* published by the Free Software Foundation.
19
#include <linux/kernel.h>
20
#include <linux/init.h>
21
#include <linux/platform_device.h>
22
#include <linux/mtd/mtd.h>
23
#include <linux/mtd/partitions.h>
24
#include <linux/mtd/onenand.h>
25
#include <linux/delay.h>
26
#include <linux/leds.h>
27
#include <linux/err.h>
28
#include <linux/clk.h>
29
#include <linux/smc91x.h>
30
#include <linux/gpio.h>
32
#include <mach/hardware.h>
33
#include <asm/mach-types.h>
34
#include <asm/mach/arch.h>
35
#include <asm/mach/flash.h>
39
#include <plat/board.h>
40
#include <plat/common.h>
41
#include <plat/gpmc.h>
43
#include <video/omapdss.h>
44
#include <video/omap-panel-generic-dpi.h>
49
/* LED & Switch macros */
50
#define LED0_GPIO13 13
51
#define LED1_GPIO14 14
52
#define LED2_GPIO15 15
53
#define SW_ENTER_GPIO16 16
54
#define SW_UP_GPIO17 17
55
#define SW_DOWN_GPIO58 58
57
#define APOLLON_FLASH_CS 0
58
#define APOLLON_ETH_CS 1
59
#define APOLLON_ETHR_GPIO_IRQ 74
61
static struct mtd_partition apollon_partitions[] = {
63
.name = "X-Loader + U-Boot",
66
.mask_flags = MTD_WRITEABLE,
70
.offset = MTDPART_OFS_APPEND,
75
.offset = MTDPART_OFS_APPEND,
80
.offset = MTDPART_OFS_APPEND,
84
.name = "filesystem00",
85
.offset = MTDPART_OFS_APPEND,
89
.name = "filesystem01",
90
.offset = MTDPART_OFS_APPEND,
91
.size = MTDPART_SIZ_FULL,
95
static struct onenand_platform_data apollon_flash_data = {
96
.parts = apollon_partitions,
97
.nr_parts = ARRAY_SIZE(apollon_partitions),
100
static struct resource apollon_flash_resource[] = {
102
.flags = IORESOURCE_MEM,
106
static struct platform_device apollon_onenand_device = {
107
.name = "onenand-flash",
110
.platform_data = &apollon_flash_data,
112
.num_resources = ARRAY_SIZE(apollon_flash_resource),
113
.resource = apollon_flash_resource,
116
static void __init apollon_flash_init(void)
120
if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) {
121
printk(KERN_ERR "Cannot request OneNAND GPMC CS\n");
124
apollon_flash_resource[0].start = base;
125
apollon_flash_resource[0].end = base + SZ_128K - 1;
128
static struct smc91x_platdata appolon_smc91x_info = {
129
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
130
.leda = RPC_LED_100_10,
131
.ledb = RPC_LED_TX_RX,
134
static struct resource apollon_smc91x_resources[] = {
136
.flags = IORESOURCE_MEM,
139
.start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
140
.end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
141
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
145
static struct platform_device apollon_smc91x_device = {
149
.platform_data = &appolon_smc91x_info,
151
.num_resources = ARRAY_SIZE(apollon_smc91x_resources),
152
.resource = apollon_smc91x_resources,
155
static struct omap_led_config apollon_led_config[] = {
158
.name = "apollon:led0",
164
.name = "apollon:led1",
170
.name = "apollon:led2",
176
static struct omap_led_platform_data apollon_led_data = {
177
.nr_leds = ARRAY_SIZE(apollon_led_config),
178
.leds = apollon_led_config,
181
static struct platform_device apollon_led_device = {
185
.platform_data = &apollon_led_data,
189
static struct platform_device *apollon_devices[] __initdata = {
190
&apollon_onenand_device,
191
&apollon_smc91x_device,
195
static inline void __init apollon_init_smc91x(void)
200
struct clk *gpmc_fck;
204
gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
205
if (IS_ERR(gpmc_fck)) {
210
clk_enable(gpmc_fck);
211
rate = clk_get_rate(gpmc_fck);
213
eth_cs = APOLLON_ETH_CS;
215
/* Make sure CS1 timings are correct */
216
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
218
if (rate >= 160000000) {
219
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
220
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
221
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
222
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
223
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
224
} else if (rate >= 130000000) {
225
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
226
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
227
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
228
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
229
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
230
} else {/* rate = 100000000 */
231
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
232
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
233
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
234
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
235
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
238
if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) {
239
printk(KERN_ERR "Failed to request GPMC CS for smc91x\n");
242
apollon_smc91x_resources[0].start = base + 0x300;
243
apollon_smc91x_resources[0].end = base + 0x30f;
246
omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0);
247
err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq");
249
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
250
APOLLON_ETHR_GPIO_IRQ);
251
gpmc_cs_free(APOLLON_ETH_CS);
254
clk_disable(gpmc_fck);
258
static struct omap_usb_config apollon_usb_config __initdata = {
260
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
265
static struct panel_generic_dpi_data apollon_panel_data = {
269
static struct omap_dss_device apollon_lcd_device = {
271
.driver_name = "generic_dpi_panel",
272
.type = OMAP_DISPLAY_TYPE_DPI,
273
.phy.dpi.data_lines = 18,
274
.data = &apollon_panel_data,
277
static struct omap_dss_device *apollon_dss_devices[] = {
281
static struct omap_dss_board_info apollon_dss_data = {
282
.num_devices = ARRAY_SIZE(apollon_dss_devices),
283
.devices = apollon_dss_devices,
284
.default_device = &apollon_lcd_device,
287
static struct gpio apollon_gpio_leds[] __initdata = {
288
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
289
{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
290
{ LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */
293
static void __init apollon_led_init(void)
295
omap_mux_init_signal("vlynq_clk.gpio_13", 0);
296
omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
297
omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
299
gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds));
302
static void __init apollon_usb_init(void)
306
omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
307
gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend");
308
omap2_usbfs_init(&apollon_usb_config);
311
#ifdef CONFIG_OMAP_MUX
312
static struct omap_board_mux board_mux[] __initdata = {
313
{ .reg_offset = OMAP_MUX_TERMINATOR },
317
static void __init omap_apollon_init(void)
321
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
323
apollon_init_smc91x();
325
apollon_flash_init();
328
/* REVISIT: where's the correct place */
329
omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
332
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
334
/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
335
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
337
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
340
* Make sure the serial ports are muxed on at this point.
341
* You have to mux them off in device drivers later on
344
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
346
omap_sdrc_init(NULL, NULL);
347
omap_display_init(&apollon_dss_data);
350
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
351
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
352
.atag_offset = 0x100,
353
.reserve = omap_reserve,
354
.map_io = omap242x_map_io,
355
.init_early = omap2420_init_early,
356
.init_irq = omap2_init_irq,
357
.init_machine = omap_apollon_init,
358
.timer = &omap2_timer,