2
* Copyright 2004-2009 Analog Devices Inc.
3
* 2005 National ICT Australia (NICTA)
4
* Aidan Williams <aidan@nicta.com.au>
6
* Licensed under the GPL-2 or later.
9
#include <linux/device.h>
10
#include <linux/etherdevice.h>
11
#include <linux/platform_device.h>
12
#include <linux/mtd/mtd.h>
13
#include <linux/mtd/partitions.h>
14
#include <linux/mtd/physmap.h>
15
#include <linux/spi/spi.h>
16
#include <linux/spi/flash.h>
18
#include <linux/i2c.h>
19
#include <linux/irq.h>
20
#include <linux/interrupt.h>
22
#include <asm/bfin5xx_spi.h>
23
#include <asm/reboot.h>
24
#include <asm/portmux.h>
26
#include <asm/bfin_sdh.h>
27
#include <linux/spi/ad7877.h>
31
* Name the Board for the /proc/cpuinfo
33
const char bfin_board_name[] = "Bluetechnix TCM-BF518";
36
* Driver needs to know address, irq and flag pin.
39
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
40
static struct mtd_partition tcm_partitions[] = {
42
.name = "bootloader(nor)",
49
.offset = MTDPART_OFS_APPEND,
53
static struct physmap_flash_data tcm_flash_data = {
55
.parts = tcm_partitions,
56
.nr_parts = ARRAY_SIZE(tcm_partitions),
59
static struct resource tcm_flash_resource = {
62
.flags = IORESOURCE_MEM,
65
static struct platform_device tcm_flash_device = {
66
.name = "physmap-flash",
69
.platform_data = &tcm_flash_data,
72
.resource = &tcm_flash_resource,
76
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
77
static struct platform_device rtc_device = {
83
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
84
#include <linux/bfin_mac.h>
85
static const unsigned short bfin_mac_peripherals[] = P_MII0;
87
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
90
.irq = IRQ_MAC_PHYINT,
94
static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
96
.phydev_data = bfin_phydev_data,
97
.phy_mode = PHY_INTERFACE_MODE_MII,
98
.mac_peripherals = bfin_mac_peripherals,
101
static struct platform_device bfin_mii_bus = {
102
.name = "bfin_mii_bus",
104
.platform_data = &bfin_mii_bus_data,
108
static struct platform_device bfin_mac_device = {
111
.platform_data = &bfin_mii_bus,
116
#if defined(CONFIG_MTD_M25P80) \
117
|| defined(CONFIG_MTD_M25P80_MODULE)
118
static struct mtd_partition bfin_spi_flash_partitions[] = {
120
.name = "bootloader(spi)",
123
.mask_flags = MTD_CAP_ROM
125
.name = "linux kernel(spi)",
126
.size = MTDPART_SIZ_FULL,
127
.offset = MTDPART_OFS_APPEND,
131
static struct flash_platform_data bfin_spi_flash_data = {
133
.parts = bfin_spi_flash_partitions,
134
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
138
/* SPI flash chip (m25p64) */
139
static struct bfin5xx_spi_chip spi_flash_chip_info = {
140
.enable_dma = 0, /* use dma transfer with this chip*/
144
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
145
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
150
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
151
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
153
.vref_delay_usecs = 50, /* internal, no capacitor */
156
.pressure_max = 1000,
158
.stopacq_polarity = 1,
159
.first_conversion_delay = 3,
160
.acquisition_time = 1,
162
.pen_down_acc_interval = 1,
166
static struct spi_board_info bfin_spi_board_info[] __initdata = {
167
#if defined(CONFIG_MTD_M25P80) \
168
|| defined(CONFIG_MTD_M25P80_MODULE)
170
/* the modalias must be the same as spi device driver name */
171
.modalias = "m25p80", /* Name of spi_driver for this device */
172
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
173
.bus_num = 0, /* Framework bus number */
174
.chip_select = 2, /* SPI0_SSEL2 */
175
.platform_data = &bfin_spi_flash_data,
176
.controller_data = &spi_flash_chip_info,
181
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
183
.modalias = "mmc_spi",
184
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
187
.controller_data = &mmc_spi_chip_info,
191
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
193
.modalias = "ad7877",
194
.platform_data = &bfin_ad7877_ts_info,
196
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
201
#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
202
&& defined(CONFIG_SND_SOC_WM8731_SPI)
204
.modalias = "wm8731",
205
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
211
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
213
.modalias = "spidev",
214
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
219
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
221
.modalias = "bfin-lq035q1-spi",
222
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
225
.mode = SPI_CPHA | SPI_CPOL,
230
/* SPI controller data */
231
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
233
static struct bfin5xx_spi_master bfin_spi0_info = {
235
.enable_dma = 1, /* master has the ability to do dma transfer */
236
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
239
static struct resource bfin_spi0_resource[] = {
241
.start = SPI0_REGBASE,
242
.end = SPI0_REGBASE + 0xFF,
243
.flags = IORESOURCE_MEM,
248
.flags = IORESOURCE_DMA,
253
.flags = IORESOURCE_IRQ,
257
static struct platform_device bfin_spi0_device = {
259
.id = 0, /* Bus number */
260
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
261
.resource = bfin_spi0_resource,
263
.platform_data = &bfin_spi0_info, /* Passed to driver */
268
static struct bfin5xx_spi_master bfin_spi1_info = {
270
.enable_dma = 1, /* master has the ability to do dma transfer */
271
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
274
static struct resource bfin_spi1_resource[] = {
276
.start = SPI1_REGBASE,
277
.end = SPI1_REGBASE + 0xFF,
278
.flags = IORESOURCE_MEM,
283
.flags = IORESOURCE_DMA,
288
.flags = IORESOURCE_IRQ,
292
static struct platform_device bfin_spi1_device = {
294
.id = 1, /* Bus number */
295
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
296
.resource = bfin_spi1_resource,
298
.platform_data = &bfin_spi1_info, /* Passed to driver */
301
#endif /* spi master and devices */
303
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
304
#ifdef CONFIG_SERIAL_BFIN_UART0
305
static struct resource bfin_uart0_resources[] = {
309
.flags = IORESOURCE_MEM,
312
.start = IRQ_UART0_TX,
314
.flags = IORESOURCE_IRQ,
317
.start = IRQ_UART0_RX,
319
.flags = IORESOURCE_IRQ,
322
.start = IRQ_UART0_ERROR,
323
.end = IRQ_UART0_ERROR,
324
.flags = IORESOURCE_IRQ,
327
.start = CH_UART0_TX,
329
.flags = IORESOURCE_DMA,
332
.start = CH_UART0_RX,
334
.flags = IORESOURCE_DMA,
338
static unsigned short bfin_uart0_peripherals[] = {
339
P_UART0_TX, P_UART0_RX, 0
342
static struct platform_device bfin_uart0_device = {
345
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
346
.resource = bfin_uart0_resources,
348
.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
352
#ifdef CONFIG_SERIAL_BFIN_UART1
353
static struct resource bfin_uart1_resources[] = {
357
.flags = IORESOURCE_MEM,
360
.start = IRQ_UART1_TX,
362
.flags = IORESOURCE_IRQ,
365
.start = IRQ_UART1_RX,
367
.flags = IORESOURCE_IRQ,
370
.start = IRQ_UART1_ERROR,
371
.end = IRQ_UART1_ERROR,
372
.flags = IORESOURCE_IRQ,
375
.start = CH_UART1_TX,
377
.flags = IORESOURCE_DMA,
380
.start = CH_UART1_RX,
382
.flags = IORESOURCE_DMA,
386
static unsigned short bfin_uart1_peripherals[] = {
387
P_UART1_TX, P_UART1_RX, 0
390
static struct platform_device bfin_uart1_device = {
393
.num_resources = ARRAY_SIZE(bfin_uart1_resources),
394
.resource = bfin_uart1_resources,
396
.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
402
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
403
#ifdef CONFIG_BFIN_SIR0
404
static struct resource bfin_sir0_resources[] = {
408
.flags = IORESOURCE_MEM,
411
.start = IRQ_UART0_RX,
412
.end = IRQ_UART0_RX+1,
413
.flags = IORESOURCE_IRQ,
416
.start = CH_UART0_RX,
417
.end = CH_UART0_RX+1,
418
.flags = IORESOURCE_DMA,
422
static struct platform_device bfin_sir0_device = {
425
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
426
.resource = bfin_sir0_resources,
429
#ifdef CONFIG_BFIN_SIR1
430
static struct resource bfin_sir1_resources[] = {
434
.flags = IORESOURCE_MEM,
437
.start = IRQ_UART1_RX,
438
.end = IRQ_UART1_RX+1,
439
.flags = IORESOURCE_IRQ,
442
.start = CH_UART1_RX,
443
.end = CH_UART1_RX+1,
444
.flags = IORESOURCE_DMA,
448
static struct platform_device bfin_sir1_device = {
451
.num_resources = ARRAY_SIZE(bfin_sir1_resources),
452
.resource = bfin_sir1_resources,
457
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
458
static struct resource bfin_twi0_resource[] = {
460
.start = TWI0_REGBASE,
462
.flags = IORESOURCE_MEM,
467
.flags = IORESOURCE_IRQ,
471
static struct platform_device i2c_bfin_twi_device = {
472
.name = "i2c-bfin-twi",
474
.num_resources = ARRAY_SIZE(bfin_twi0_resource),
475
.resource = bfin_twi0_resource,
479
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
480
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
482
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
485
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
487
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
493
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
494
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
495
static struct resource bfin_sport0_uart_resources[] = {
497
.start = SPORT0_TCR1,
498
.end = SPORT0_MRCS3+4,
499
.flags = IORESOURCE_MEM,
502
.start = IRQ_SPORT0_RX,
503
.end = IRQ_SPORT0_RX+1,
504
.flags = IORESOURCE_IRQ,
507
.start = IRQ_SPORT0_ERROR,
508
.end = IRQ_SPORT0_ERROR,
509
.flags = IORESOURCE_IRQ,
513
static unsigned short bfin_sport0_peripherals[] = {
514
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
515
P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
518
static struct platform_device bfin_sport0_uart_device = {
519
.name = "bfin-sport-uart",
521
.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
522
.resource = bfin_sport0_uart_resources,
524
.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
528
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
529
static struct resource bfin_sport1_uart_resources[] = {
531
.start = SPORT1_TCR1,
532
.end = SPORT1_MRCS3+4,
533
.flags = IORESOURCE_MEM,
536
.start = IRQ_SPORT1_RX,
537
.end = IRQ_SPORT1_RX+1,
538
.flags = IORESOURCE_IRQ,
541
.start = IRQ_SPORT1_ERROR,
542
.end = IRQ_SPORT1_ERROR,
543
.flags = IORESOURCE_IRQ,
547
static unsigned short bfin_sport1_peripherals[] = {
548
P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
549
P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
552
static struct platform_device bfin_sport1_uart_device = {
553
.name = "bfin-sport-uart",
555
.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
556
.resource = bfin_sport1_uart_resources,
558
.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
564
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
565
#include <linux/input.h>
566
#include <linux/gpio_keys.h>
568
static struct gpio_keys_button bfin_gpio_keys_table[] = {
569
{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
570
{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
573
static struct gpio_keys_platform_data bfin_gpio_keys_data = {
574
.buttons = bfin_gpio_keys_table,
575
.nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
578
static struct platform_device bfin_device_gpiokeys = {
581
.platform_data = &bfin_gpio_keys_data,
586
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
588
static struct bfin_sd_host bfin_sdh_data = {
590
.irq_int0 = IRQ_RSI_INT0,
591
.pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
594
static struct platform_device bf51x_sdh_device = {
598
.platform_data = &bfin_sdh_data,
603
static const unsigned int cclk_vlev_datasheet[] =
605
VRPAIR(VLEV_100, 400000000),
606
VRPAIR(VLEV_105, 426000000),
607
VRPAIR(VLEV_110, 500000000),
608
VRPAIR(VLEV_115, 533000000),
609
VRPAIR(VLEV_120, 600000000),
612
static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
613
.tuple_tab = cclk_vlev_datasheet,
614
.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
615
.vr_settling_time = 25 /* us */,
618
static struct platform_device bfin_dpmc = {
621
.platform_data = &bfin_dmpc_vreg_data,
625
static struct platform_device *tcm_devices[] __initdata = {
629
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
633
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
638
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
643
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
644
#ifdef CONFIG_SERIAL_BFIN_UART0
647
#ifdef CONFIG_SERIAL_BFIN_UART1
652
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
653
#ifdef CONFIG_BFIN_SIR0
656
#ifdef CONFIG_BFIN_SIR1
661
#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
662
&i2c_bfin_twi_device,
665
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
666
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
667
&bfin_sport0_uart_device,
669
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
670
&bfin_sport1_uart_device,
674
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
675
&bfin_device_gpiokeys,
678
#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
682
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
687
static int __init tcm_init(void)
689
printk(KERN_INFO "%s(): registering device resources\n", __func__);
690
i2c_register_board_info(0, bfin_i2c_board_info,
691
ARRAY_SIZE(bfin_i2c_board_info));
692
platform_add_devices(tcm_devices, ARRAY_SIZE(tcm_devices));
693
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
697
arch_initcall(tcm_init);
699
static struct platform_device *tcm_early_devices[] __initdata = {
700
#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
701
#ifdef CONFIG_SERIAL_BFIN_UART0
704
#ifdef CONFIG_SERIAL_BFIN_UART1
709
#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
710
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
711
&bfin_sport0_uart_device,
713
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
714
&bfin_sport1_uart_device,
719
void __init native_machine_early_platform_add_devices(void)
721
printk(KERN_INFO "register early platform devices\n");
722
early_platform_add_devices(tcm_early_devices,
723
ARRAY_SIZE(tcm_early_devices));
726
void native_machine_restart(char *cmd)
728
/* workaround reboot hang when booting from SPI */
729
if ((bfin_read_SYSCR() & 0x7) == 0x3)
730
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
733
void bfin_get_ether_addr(char *addr)
735
random_ether_addr(addr);
736
printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
738
EXPORT_SYMBOL(bfin_get_ether_addr);