1
/* enternow_pci.c,v 0.99 2001/10/02
3
* enternow_pci.c Card-specific routines for
4
* Formula-n enter:now ISDN PCI ab
5
* Gerdes AG Power ISDN PCI
6
* Woerltronic SA 16 PCI
7
* (based on HiSax driver by Karsten Keil)
9
* Author Christoph Ersfeld <info@formula-n.de>
10
* Formula-n Europe AG (www.formula-n.com)
11
* previously Gerdes AG
14
* This file is (c) under GNU PUBLIC LICENSE
17
* This driver interfaces to netjet.c which performs B-channel
20
* Version 0.99 is the first release of this driver and there are
21
* certainly a few bugs.
22
* It isn't testet on linux 2.4 yet, so consider this code to be
25
* Please don't report me any malfunction without sending
26
* (compressed) debug-logs.
27
* It would be nearly impossible to retrace it.
29
* Log D-channel-processing as follows:
31
* 1. Load hisax with card-specific parameters, this example ist for
32
* Formula-n enter:now ISDN PCI and compatible
33
* (f.e. Gerdes Power ISDN PCI)
35
* modprobe hisax type=41 protocol=2 id=gerdes
37
* if you chose an other value for id, you need to modify the
42
* hisaxctrl gerdes 1 0x3ff
43
* hisaxctrl gerdes 11 0x4f
44
* cat /dev/isdnctrl >> ~/log &
46
* Please take also a look into /var/log/messages if there is
47
* anything importand concerning HISAX.
51
* Programming the driver for Formula-n enter:now ISDN PCI and
52
* necessary the driver for the used Amd 7930 D-channel-controller
53
* was spnsored by Formula-n Europe AG.
54
* Thanks to Karsten Keil and Petr Novak, who gave me support in
55
* Hisax-specific questions.
56
* I want so say special thanks to Carl-Friedrich Braun, who had to
57
* answer a lot of questions about generally ISDN and about handling
66
#include "amd7930_fn.h"
67
#include <linux/interrupt.h>
68
#include <linux/ppp_defs.h>
69
#include <linux/pci.h>
70
#include <linux/init.h>
75
static const char *enternow_pci_rev = "$Revision: 1.1.4.5 $";
78
/* for PowerISDN PCI */
79
#define TJ_AMD_IRQ 0x20
84
/* The window to [the] AMD [chip]...
85
* From address hw.njet.base + TJ_AMD_PORT onwards, the AMD
86
* maps [consecutive/multiple] 8 bits into the TigerJet I/O space
87
* -> 0x01 of the AMD at hw.njet.base + 0C4 */
88
#define TJ_AMD_PORT 0xC0
92
/* *************************** I/O-Interface functions ************************************* */
95
/* cs->readisac, macro rByteAMD */
97
ReadByteAmd7930(struct IsdnCardState *cs, unsigned char offset)
101
return (inb(cs->hw.njet.isac + 4*offset));
103
/* indirect register */
105
outb(offset, cs->hw.njet.isac + 4*AMD_CR);
106
return(inb(cs->hw.njet.isac + 4*AMD_DR));
110
/* cs->writeisac, macro wByteAMD */
112
WriteByteAmd7930(struct IsdnCardState *cs, unsigned char offset, unsigned char value)
114
/* direct register */
116
outb(value, cs->hw.njet.isac + 4*offset);
118
/* indirect register */
120
outb(offset, cs->hw.njet.isac + 4*AMD_CR);
121
outb(value, cs->hw.njet.isac + 4*AMD_DR);
127
enpci_setIrqMask(struct IsdnCardState *cs, unsigned char val) {
129
outb(0x00, cs->hw.njet.base+NETJET_IRQMASK1);
131
outb(TJ_AMD_IRQ, cs->hw.njet.base+NETJET_IRQMASK1);
135
static unsigned char dummyrr(struct IsdnCardState *cs, int chan, unsigned char off)
140
static void dummywr(struct IsdnCardState *cs, int chan, unsigned char off, unsigned char value)
146
/* ******************************************************************************** */
150
reset_enpci(struct IsdnCardState *cs)
152
if (cs->debug & L1_DEB_ISAC)
153
debugl1(cs, "enter:now PCI: reset");
155
/* Reset on, (also for AMD) */
156
cs->hw.njet.ctrl_reg = 0x07;
157
outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL);
160
cs->hw.njet.ctrl_reg = 0x30;
161
outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL);
164
cs->hw.njet.auxd = 0; // LED-status
165
cs->hw.njet.dmactrl = 0;
166
outb(~TJ_AMD_IRQ, cs->hw.njet.base + NETJET_AUXCTRL);
167
outb(TJ_AMD_IRQ, cs->hw.njet.base + NETJET_IRQMASK1);
168
outb(cs->hw.njet.auxd, cs->hw.njet.auxa); // LED off
173
enpci_card_msg(struct IsdnCardState *cs, int mt, void *arg)
178
if (cs->debug & L1_DEB_ISAC)
179
debugl1(cs, "enter:now PCI: card_msg: 0x%04X", mt);
183
spin_lock_irqsave(&cs->lock, flags);
186
spin_unlock_irqrestore(&cs->lock, flags);
189
release_io_netjet(cs);
194
/* irq must be on here */
200
/* TEI assigned, LED1 on */
201
cs->hw.njet.auxd = TJ_AMD_IRQ << 1;
202
outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
205
/* TEI removed, LEDs off */
206
cs->hw.njet.auxd = 0;
207
outb(0x00, cs->hw.njet.base + NETJET_AUXDATA);
210
/* activate B-channel */
211
chan = (unsigned char *)arg;
213
if (cs->debug & L1_DEB_ISAC)
214
debugl1(cs, "enter:now PCI: assign phys. BC %d in AMD LMR1", *chan);
216
cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 | (*chan + 1)), "MDL_BC_ASSIGN");
217
/* at least one b-channel in use, LED 2 on */
218
cs->hw.njet.auxd |= TJ_AMD_IRQ << 2;
219
outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
222
/* deactivate B-channel */
223
chan = (unsigned char *)arg;
225
if (cs->debug & L1_DEB_ISAC)
226
debugl1(cs, "enter:now PCI: release phys. BC %d in Amd LMR1", *chan);
228
cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 & ~(*chan + 1)), "MDL_BC_RELEASE");
229
/* no b-channel active -> LED2 off */
230
if (!(cs->dc.amd7930.lmr1 & 3)) {
231
cs->hw.njet.auxd &= ~(TJ_AMD_IRQ << 2);
232
outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
243
enpci_interrupt(int intno, void *dev_id)
245
struct IsdnCardState *cs = dev_id;
246
unsigned char s0val, s1val, ir;
249
spin_lock_irqsave(&cs->lock, flags);
250
s1val = inb(cs->hw.njet.base + NETJET_IRQSTAT1);
252
/* AMD threw an interrupt */
253
if (!(s1val & TJ_AMD_IRQ)) {
254
/* read and clear interrupt-register */
255
ir = ReadByteAmd7930(cs, 0x00);
256
Amd7930_interrupt(cs, ir);
260
s0val = inb(cs->hw.njet.base + NETJET_IRQSTAT0);
261
if ((s0val | s1val)==0) { // shared IRQ
262
spin_unlock_irqrestore(&cs->lock, flags);
266
outb(s0val, cs->hw.njet.base + NETJET_IRQSTAT0);
268
/* DMA-Interrupt: B-channel-stuff */
269
/* set bits in sval to indicate which page is free */
270
if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
271
inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
272
/* the 2nd write page is free */
274
else /* the 1st write page is free */
276
if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
277
inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
278
/* the 2nd read page is free */
279
s0val = s0val | 0x02;
280
else /* the 1st read page is free */
281
s0val = s0val | 0x01;
282
if (s0val != cs->hw.njet.last_is0) /* we have a DMA interrupt */
284
if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
285
spin_unlock_irqrestore(&cs->lock, flags);
288
cs->hw.njet.irqstat0 = s0val;
289
if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) !=
290
(cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
291
/* we have a read dma int */
293
if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
294
(cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
295
/* we have a write dma int */
297
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
299
spin_unlock_irqrestore(&cs->lock, flags);
303
static int __devinit en_pci_probe(struct pci_dev *dev_netjet,
304
struct IsdnCardState *cs)
306
if (pci_enable_device(dev_netjet))
308
cs->irq = dev_netjet->irq;
310
printk(KERN_WARNING "enter:now PCI: No IRQ for PCI card found\n");
313
cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
314
if (!cs->hw.njet.base) {
315
printk(KERN_WARNING "enter:now PCI: No IO-Adr for PCI card found\n");
318
/* checks Sub-Vendor ID because system crashes with Traverse-Card */
319
if ((dev_netjet->subsystem_vendor != 0x55) ||
320
(dev_netjet->subsystem_device != 0x02)) {
321
printk(KERN_WARNING "enter:now: You tried to load this driver with an incompatible TigerJet-card\n");
322
printk(KERN_WARNING "Use type=20 for Traverse NetJet PCI Card.\n");
329
static void __devinit en_cs_init(struct IsdnCard *card,
330
struct IsdnCardState *cs)
332
cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
333
cs->hw.njet.isac = cs->hw.njet.base + 0xC0; // Fenster zum AMD
336
cs->hw.njet.ctrl_reg = 0x07; // ge�ndert von 0xff
337
outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL);
341
cs->hw.njet.ctrl_reg = 0x30; /* Reset Off and status read clear */
342
outb(cs->hw.njet.ctrl_reg, cs->hw.njet.base + NETJET_CTRL);
345
cs->hw.njet.auxd = 0x00; // war 0xc0
346
cs->hw.njet.dmactrl = 0;
348
outb(~TJ_AMD_IRQ, cs->hw.njet.base + NETJET_AUXCTRL);
349
outb(TJ_AMD_IRQ, cs->hw.njet.base + NETJET_IRQMASK1);
350
outb(cs->hw.njet.auxd, cs->hw.njet.auxa);
353
static int __devinit en_cs_init_rest(struct IsdnCard *card,
354
struct IsdnCardState *cs)
356
const int bytecnt = 256;
359
"enter:now PCI: PCI card configured at 0x%lx IRQ %d\n",
360
cs->hw.njet.base, cs->irq);
361
if (!request_region(cs->hw.njet.base, bytecnt, "Fn_ISDN")) {
363
"HiSax: enter:now config port %lx-%lx already in use\n",
365
cs->hw.njet.base + bytecnt);
370
cs->hw.njet.last_is0 = 0;
372
cs->readisac = &ReadByteAmd7930;
374
cs->writeisac = &WriteByteAmd7930;
375
cs->dc.amd7930.setIrqMask = &enpci_setIrqMask;
377
cs->BC_Read_Reg = &dummyrr;
378
cs->BC_Write_Reg = &dummywr;
379
cs->BC_Send_Data = &netjet_fill_dma;
380
cs->cardmsg = &enpci_card_msg;
381
cs->irq_func = &enpci_interrupt;
382
cs->irq_flags |= IRQF_SHARED;
387
static struct pci_dev *dev_netjet __devinitdata = NULL;
389
/* called by config.c */
391
setup_enternow_pci(struct IsdnCard *card)
394
struct IsdnCardState *cs = card->cs;
398
#error "not running on big endian machines now"
401
strcpy(tmp, enternow_pci_rev);
402
printk(KERN_INFO "HiSax: Formula-n Europe AG enter:now ISDN PCI driver Rev. %s\n", HiSax_getrev(tmp));
403
if (cs->typ != ISDN_CTYPE_ENTERNOW)
405
test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
409
if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
410
PCI_DEVICE_ID_TIGERJET_300, dev_netjet))) {
411
ret = en_pci_probe(dev_netjet, cs);
415
printk(KERN_WARNING "enter:now PCI: No PCI card found\n");
419
en_cs_init(card, cs);
423
return en_cs_init_rest(card, cs);