2
* Copyright (C) 1996 Linus Torvalds & author (see below)
5
#include <linux/module.h>
6
#include <linux/types.h>
7
#include <linux/kernel.h>
8
#include <linux/delay.h>
9
#include <linux/timer.h>
11
#include <linux/ioport.h>
12
#include <linux/blkdev.h>
13
#include <linux/ide.h>
14
#include <linux/init.h>
18
#define DRV_NAME "dtc2278"
21
* Changing this #undef to #define may solve start up problems in some systems.
23
#undef ALWAYS_SET_DTC2278_PIO_MODE
26
* From: andy@cercle.cts.com (Dyan Wile)
28
* Below is a patch for DTC-2278 - alike software-programmable controllers
29
* The code enables the secondary IDE controller and the PIO4 (3?) timings on
30
* the primary (EIDE). You may probably have to enable the 32-bit support to
31
* get the full speed. You better get the disk interrupts disabled ( hdparm -u0
32
* /dev/hd.. ) for the drives connected to the EIDE interface. (I get my
33
* filesystem corrupted with -u1, but under heavy disk load only :-)
35
* This card is now forced to use the "serialize" feature,
36
* and irq-unmasking is disallowed. If io_32bit is enabled,
37
* it must be done for BOTH drives on each interface.
39
* This code was written for the DTC2278E, but might work with any of these:
41
* DTC2278S has only a single IDE interface.
42
* DTC2278D has two IDE interfaces and is otherwise identical to the S version.
43
* DTC2278E also has serial ports and a printer port
44
* DTC2278EB: has onboard BIOS, and "works like a charm" -- Kent Bradford <kent@theory.caltech.edu>
46
* There may be a fourth controller type. The S and D versions use the
47
* Winbond chip, and I think the E version does also.
51
static void sub22 (char b, char c)
55
for(i = 0; i < 3; ++i) {
69
static DEFINE_SPINLOCK(dtc2278_lock);
71
static void dtc2278_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
75
if (drive->pio_mode >= XFER_PIO_3) {
76
spin_lock_irqsave(&dtc2278_lock, flags);
78
* This enables PIO mode4 (3?) on the first interface
82
spin_unlock_irqrestore(&dtc2278_lock, flags);
84
/* we don't know how to set it back again.. */
85
/* Actually we do - there is a data sheet available for the
86
Winbond but does anyone actually care */
90
static const struct ide_port_ops dtc2278_port_ops = {
91
.set_pio_mode = dtc2278_set_pio_mode,
94
static const struct ide_port_info dtc2278_port_info __initdata = {
96
.chipset = ide_dtc2278,
97
.port_ops = &dtc2278_port_ops,
98
.host_flags = IDE_HFLAG_SERIALIZE |
99
IDE_HFLAG_NO_UNMASK_IRQS |
101
/* disallow ->io_32bit changes */
102
IDE_HFLAG_NO_IO_32BIT |
105
.pio_mask = ATA_PIO4,
108
static int __init dtc2278_probe(void)
112
local_irq_save(flags);
114
* This enables the second interface
120
#ifdef ALWAYS_SET_DTC2278_PIO_MODE
122
* This enables PIO mode4 (3?) on the first interface
123
* and may solve start-up problems for some people.
128
local_irq_restore(flags);
130
return ide_legacy_device_add(&dtc2278_port_info, 0);
133
static int probe_dtc2278;
135
module_param_named(probe, probe_dtc2278, bool, 0);
136
MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
138
static int __init dtc2278_init(void)
140
if (probe_dtc2278 == 0)
143
if (dtc2278_probe()) {
144
printk(KERN_ERR "dtc2278: ide interfaces already in use!\n");
150
module_init(dtc2278_init);
152
MODULE_AUTHOR("See Local File");
153
MODULE_DESCRIPTION("support of DTC-2278 VLB IDE chipsets");
154
MODULE_LICENSE("GPL");