4
This is a v4l2 device driver for the cx2388x chip.
12
- For now, only capture and read(). Overlay isn't supported.
15
- The chip specs for the on-chip TV sound decoder are next
17
- Neverless the builtin TV sound decoder starts working now,
18
at least for some standards.
19
FOR ANY REPORTS ON THIS PLEASE MENTION THE TV NORM YOU ARE
21
- Most tuner chips do provide mono sound, which may or may not
22
be useable depending on the board design. With the Hauppauge
23
cards it works, so there is mono sound available as fallback.
24
- audio data dma (i.e. recording without loopback cable to the
25
sound card) is supported via cx88-alsa.
28
- Code present. Works for NTSC closed caption. PAL and other
29
TV norms may or may not work.
32
how to add support for new cards
33
================================
35
The driver needs some config info for the TV cards. This stuff is in
36
cx88-cards.c. If the driver doesn't work well you likely need a new
37
entry for your card in that file. Check the kernel log (using dmesg)
38
to see whenever the driver knows your card or not. There is a line
41
cx8800[0]: subsystem: 0070:3400, board: Hauppauge WinTV \
42
34xxx models [card=1,autodetected]
44
If your card is listed as "board: UNKNOWN/GENERIC" it is unknown to
45
the driver. What to do then?
47
(1) Try upgrading to the latest snapshot, maybe it has been added
49
(2) You can try to create a new entry yourself, have a look at
50
cx88-cards.c. If that worked, mail me your changes as unified
52
(3) Or you can mail me the config information. I need at least the
53
following informations to add the card:
55
* the PCI Subsystem ID ("0070:3400" from the line above,
56
"lspci -v" output is fine too).
57
* the tuner type used by the card. You can try to find one by
58
trial-and-error using the tuner=<n> insmod option. If you
59
know which one the card has you can also have a look at the
60
list in CARDLIST.tuner
67
Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]