2
* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
3
* flexcop.c - main module part
4
* Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
5
* based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
8
* John Jurrius from BBTI, Inc. for extensive support
9
* with code examples and data books
10
* Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
12
* Contributions to the skystar2-driver have been done by
13
* Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
14
* Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
15
* Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu)
16
* Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac
19
* This program is free software; you can redistribute it and/or
20
* modify it under the terms of the GNU Lesser General Public License
21
* as published by the Free Software Foundation; either version 2.1
22
* of the License, or (at your option) any later version.
24
* This program is distributed in the hope that it will be useful,
25
* but WITHOUT ANY WARRANTY; without even the implied warranty of
26
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27
* GNU General Public License for more details.
29
* You should have received a copy of the GNU Lesser General Public License
30
* along with this program; if not, write to the Free Software
31
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
36
#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
37
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
39
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
42
#define DEBSTATUS " (debugging is not enabled)"
45
int b2c2_flexcop_debug;
46
module_param_named(debug, b2c2_flexcop_debug, int, 0644);
47
MODULE_PARM_DESC(debug,
48
"set debug level (1=info,2=tuner,4=i2c,8=ts,"
49
"16=sram,32=reg (|-able))."
53
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
55
/* global zero for ibi values */
56
flexcop_ibi_value ibi_zero;
58
static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
60
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
61
return flexcop_pid_feed_control(fc, dvbdmxfeed, 1);
64
static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
66
struct flexcop_device *fc = dvbdmxfeed->demux->priv;
67
return flexcop_pid_feed_control(fc, dvbdmxfeed, 0);
70
static int flexcop_dvb_init(struct flexcop_device *fc)
72
int ret = dvb_register_adapter(&fc->dvb_adapter,
73
"FlexCop Digital TV device", fc->owner,
76
err("error registering DVB adapter");
79
fc->dvb_adapter.priv = fc;
81
fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING
82
| DMX_MEMORY_BASED_FILTERING);
84
fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
85
fc->demux.start_feed = flexcop_dvb_start_feed;
86
fc->demux.stop_feed = flexcop_dvb_stop_feed;
87
fc->demux.write_to_decoder = NULL;
89
if ((ret = dvb_dmx_init(&fc->demux)) < 0) {
90
err("dvb_dmx failed: error %d", ret);
94
fc->hw_frontend.source = DMX_FRONTEND_0;
96
fc->dmxdev.filternum = fc->demux.feednum;
97
fc->dmxdev.demux = &fc->demux.dmx;
98
fc->dmxdev.capabilities = 0;
99
if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) {
100
err("dvb_dmxdev_init failed: error %d", ret);
104
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
105
err("adding hw_frontend to dmx failed: error %d", ret);
106
goto err_dmx_add_hw_frontend;
109
fc->mem_frontend.source = DMX_MEMORY_FE;
110
if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) {
111
err("adding mem_frontend to dmx failed: error %d", ret);
112
goto err_dmx_add_mem_frontend;
115
if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) {
116
err("connect frontend failed: error %d", ret);
117
goto err_connect_frontend;
120
dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
122
fc->init_state |= FC_STATE_DVB_INIT;
125
err_connect_frontend:
126
fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend);
127
err_dmx_add_mem_frontend:
128
fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend);
129
err_dmx_add_hw_frontend:
130
dvb_dmxdev_release(&fc->dmxdev);
132
dvb_dmx_release(&fc->demux);
134
dvb_unregister_adapter(&fc->dvb_adapter);
138
static void flexcop_dvb_exit(struct flexcop_device *fc)
140
if (fc->init_state & FC_STATE_DVB_INIT) {
141
dvb_net_release(&fc->dvbnet);
143
fc->demux.dmx.close(&fc->demux.dmx);
144
fc->demux.dmx.remove_frontend(&fc->demux.dmx,
146
fc->demux.dmx.remove_frontend(&fc->demux.dmx,
148
dvb_dmxdev_release(&fc->dmxdev);
149
dvb_dmx_release(&fc->demux);
150
dvb_unregister_adapter(&fc->dvb_adapter);
151
deb_info("deinitialized dvb stuff\n");
153
fc->init_state &= ~FC_STATE_DVB_INIT;
156
/* these methods are necessary to achieve the long-term-goal of hiding the
157
* struct flexcop_device from the bus-parts */
158
void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
160
dvb_dmx_swfilter(&fc->demux, buf, len);
162
EXPORT_SYMBOL(flexcop_pass_dmx_data);
164
void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
166
dvb_dmx_swfilter_packets(&fc->demux, buf, no);
168
EXPORT_SYMBOL(flexcop_pass_dmx_packets);
170
static void flexcop_reset(struct flexcop_device *fc)
172
flexcop_ibi_value v210, v204;
174
/* reset the flexcop itself */
175
fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
178
v210.sw_reset_210.reset_block_000 = 1;
179
v210.sw_reset_210.reset_block_100 = 1;
180
v210.sw_reset_210.reset_block_200 = 1;
181
v210.sw_reset_210.reset_block_300 = 1;
182
v210.sw_reset_210.reset_block_400 = 1;
183
v210.sw_reset_210.reset_block_500 = 1;
184
v210.sw_reset_210.reset_block_600 = 1;
185
v210.sw_reset_210.reset_block_700 = 1;
186
v210.sw_reset_210.Block_reset_enable = 0xb2;
187
v210.sw_reset_210.Special_controls = 0xc259;
188
fc->write_ibi_reg(fc,sw_reset_210,v210);
191
/* reset the periphical devices */
193
v204 = fc->read_ibi_reg(fc,misc_204);
194
v204.misc_204.Per_reset_sig = 0;
195
fc->write_ibi_reg(fc,misc_204,v204);
197
v204.misc_204.Per_reset_sig = 1;
198
fc->write_ibi_reg(fc,misc_204,v204);
201
void flexcop_reset_block_300(struct flexcop_device *fc)
203
flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208),
204
v210 = fc->read_ibi_reg(fc, sw_reset_210);
206
deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw);
207
fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
209
v210.sw_reset_210.reset_block_300 = 1;
210
v210.sw_reset_210.Block_reset_enable = 0xb2;
212
fc->write_ibi_reg(fc,sw_reset_210,v210);
213
fc->write_ibi_reg(fc,ctrl_208,v208_save);
216
struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
219
struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device),
226
bus = kzalloc(bus_specific_len, GFP_KERNEL);
233
fc->bus_specific = bus;
237
EXPORT_SYMBOL(flexcop_device_kmalloc);
239
void flexcop_device_kfree(struct flexcop_device *fc)
241
kfree(fc->bus_specific);
244
EXPORT_SYMBOL(flexcop_device_kfree);
246
int flexcop_device_initialize(struct flexcop_device *fc)
252
flexcop_determine_revision(fc);
253
flexcop_sram_init(fc);
254
flexcop_hw_filter_init(fc);
255
flexcop_smc_ctrl(fc, 0);
257
if ((ret = flexcop_dvb_init(fc)))
260
/* i2c has to be done before doing EEProm stuff -
261
* because the EEProm is accessed via i2c */
262
ret = flexcop_i2c_init(fc);
266
/* do the MAC address reading after initializing the dvb_adapter */
267
if (fc->get_mac_addr(fc, 0) == 0) {
268
u8 *b = fc->dvb_adapter.proposed_mac;
269
info("MAC address = %pM", b);
270
flexcop_set_mac_filter(fc,b);
271
flexcop_mac_filter_ctrl(fc,1);
273
warn("reading of MAC address failed.\n");
275
if ((ret = flexcop_frontend_init(fc)))
278
flexcop_device_name(fc,"initialization of","complete");
282
flexcop_device_exit(fc);
285
EXPORT_SYMBOL(flexcop_device_initialize);
287
void flexcop_device_exit(struct flexcop_device *fc)
289
flexcop_frontend_exit(fc);
290
flexcop_i2c_exit(fc);
291
flexcop_dvb_exit(fc);
293
EXPORT_SYMBOL(flexcop_device_exit);
295
static int flexcop_module_init(void)
297
info(DRIVER_NAME " loaded successfully");
301
static void flexcop_module_cleanup(void)
303
info(DRIVER_NAME " unloaded successfully");
306
module_init(flexcop_module_init);
307
module_exit(flexcop_module_cleanup);
309
MODULE_AUTHOR(DRIVER_AUTHOR);
310
MODULE_DESCRIPTION(DRIVER_NAME);
311
MODULE_LICENSE("GPL");